请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
將完整的規格書下載為PDF:
Electrical specifications | ||
---|---|---|
Operating voltage | 415 V | |
Operating current | see PDF data sheet | |
Terminal capacity | ||
Main terminals capacity | 4 mm2 | |
Main terminals torque | 1.7 Nm | |
Grounding terminals capacity | M6 grounding bolt | |
Contactor rating | see PDF data sheet | |
Overload relay | see PDF data sheet | |
Phases | 3 | |
Function | direct online starter | |
Switching diagram | see switching diagram overview | |
Mechanical specifications | ||
Thread type | metric ISO pitch 1.5 mm | |
Enclosure range | F7 | |
Enclosure cover | detachable , hinged | |
Cover fixing | stainless steel socket cap head screws | |
Screws | M6 | |
Number | 8 | |
Tightening torque | 3 Nm | |
Material of screws | stainless steel | |
Yield stress | min. 450 N/mm2 | |
Cover seal | chloroprene | |
Flamepath grease | Fluid film grade AR | |
Degree of protection | IP66 | |
Cable entry face A | ||
M20 quantity | 2 | |
M20 type | Stopping Plugs | |
Cable entry face B | ||
M20 quantity | 2 | |
Material | ||
Enclosure | aluminum alloy | |
Finish | epoxy coated RAL 7032 | |
Mass | approx. 5 kg | |
Dimensions | ||
External dimension (A) | 210 mm | |
External dimension (B) | 210 mm | |
External dimension (C) | 158 mm | |
External dimension with operating element (C1) | 199 mm | |
Mounting holes distance (G) | 187 mm | |
Mounting holes distance (H) | 187 mm | |
Mounting holes diameter (J) | 9 mm | |
Tightening torque | ||
Nut torque at enclosure (SW1) | see datasheets of stopping plugs | |
Mounting | see PDF data sheet | |
Grounding | M6 external grounding points | |
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Data for application in connection with hazardous areas | ||
EU-type examination certificate | SIRA 07 ATEX 1134 | |
Marking | II 2 GD Ex d IIB T* Ex tD A21 T6/T80 °C @ Ta +60 °C |
|
Maximum power dissipation | 31 W | |
International approvals | ||
IECEx approval | IECEx TSA 07.0029 | |
Conformity | ||
Degree of protection | EN60529 | |
Usage category | IEC / EN 60947 | |
CE marking | 0102 | |
General information | ||
Ordering information | This device will be delivered completely configured and assembled ready for use. For configuration details please contact Customer Service. | |
Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
System | Classcode |
---|---|
ECLASS 13.0 | 27144052 |
ECLASS 12.0 | 27144052 |
ECLASS 11.0 | 27144052 |
ECLASS 10.0.1 | 27144052 |
ECLASS 9.0 | 27144052 |
ECLASS 8.0 | 27144052 |
ECLASS 5.1 | 27370401 |
ETIM 9.0 | EC000522 |
ETIM 8.0 | EC000522 |
ETIM 7.0 | EC000522 |
ETIM 6.0 | EC000522 |
ETIM 5.0 | EC000522 |
UNSPSC 12.1 | 39121314 |
Certificates | 證書號碼 | 語言 | 檔案類型 | 檔案尺寸 |
---|---|---|---|---|
Australia Sira II 2GD ATEX | SIRA 07ATEX1134 | ALL | 235 KB | |
Test Safe IECEx Certificate of Conformity | IECEx TSA 07.0029 | ALL | LINK | --- |
Declaration of Conformity | ||||
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-A036D | ALL | 160 KB |