请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
M-LB-1.150.M
General specifications |
Device type | type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1 |
Number of protected supply lines | 1 |
Electrical specifications |
Maximum continuous operating voltage | 150 V AC |
Nominal discharge current (8/20 µs) | 15 kA |
Max. surge current (8/20 µs) | 40 kA |
Indicators/settings |
Display elements | status display operating state (green) fault indication (red) |
Directive conformity |
Low voltage | |
| Directive 2014/35/EU | EN 61643-11:2012 |
Conformity |
Degree of protection | IEC 60529 |
Shock resistance | EN 60068-2 |
Vibration resistance | EN 60068-2 |
Ambient conditions |
Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) |
Mechanical specifications |
Degree of protection | IP20 |
Material | |
| Housing | thermoplastic, color grey , UL 94 V-0 |
Mass | approx. 50 g |
Dimensions | 18 x 45 x 50 mm (0.7 x 1.8 x 2 inch) (W x H x D) , 1 TE acc. to DIN 43880 |
| Height | 45 mm |
| Width | 18 mm |
| Depth | 50 mm |
Mounting | in the surge protection barrier M-LB-*.****.* |
General information |
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Classifications
System | Classcode |
ECLASS 13.0 | 27171202 |
ECLASS 12.0 | 27171202 |
ECLASS 11.0 | 27130805 |
ECLASS 10.0.1 | 27130805 |
ECLASS 9.0 | 27130805 |
ECLASS 8.0 | 27130805 |
ECLASS 5.1 | 27130801 |
ETIM 9.0 | EC000941 |
ETIM 8.0 | EC000941 |
ETIM 7.0 | EC000941 |
ETIM 6.0 | EC000941 |
ETIM 5.0 | EC000941 |
UNSPSC 12.1 | 39121610 |
Details:
M-LB-1.150.M
相關產品:
M-LB-1.150.M
Accessory of |
|
|
|
Surge protection for 4 supply lines, Type 2 acc. to EN 61643-11, For TN-S systems (120 V AC/240 V AC), Pre-wired unit, Operating state and fault indication of every protected line, Fault indication output, DIN rail mountable, Device type: type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1, Number of protected supply lines: 4pa |
|
|
|
|
Surge protection for 1 supply line, Type 2 acc. to EN 61643-11, For 120 V, Pre-wired unit, Operating state and fault indication of every protected line, Fault indication output, DIN rail mountable, Device type: type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1, Number of protected supply lines: 1pa |
|
|
|
|
Surge protection for 2 supply lines, Type 2 acc. to EN 61643-11, For TN systems (120 V AC), Pre-wired unit, Operating state and fault indication of every protected line, Fault indication output, DIN rail mountable, Device type: type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1, Number of protected supply lines: 2pa |
|
|
|
|
Surge protection for 3 supply lines, Type 2 acc. to EN 61643-11, For TN-C systems (120 V AC/240 V AC), Pre-wired unit, Operating state and fault indication of every protected line, Fault indication output, DIN rail mountable, Device type: type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1, Number of protected supply lines: 3pa |
|