工業感測器服務資訊
+886 2 27227708
+886-2-27227782
防爆產品服務資訊
工業感測器

Print mark color sensor DF12-11-3K/9s20/145/151

DF12-11-3K/9s20/145/151
  • Diffuse mode sensor for recording colored print marks on backgrounds with different colors
  • Color detection by means of the active three-range method
  • Teach-in procedure for automatic threshold value setting
  • 3 independent channels
  • 3 tolerance steps per channel
  • 3 Push-pull outputs

请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。

將完整的規格書下載為PDF:


產品規格摘要：的技術資料  DF12-11-3K/9s20/145/151

產品描述
Print mark color sensor, 11 mm detection range, RGB light, external Teach-In, timer function, 3 push-pull outputs, M12 plug
General specifications
Sensor range11 mm ± 2 mm
Light source3 LEDs (R,G,B)
Light typeVisible green/red/blue, modulated light
Light spot representation1 mm x 3 mm
Angle deviationmax. ± 3°
Functional safety related parameters
MTTFd730 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)60 %
Indicators/operating means
Operation indicatorLED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz)
Function indicator2 LEDs yellow, light up in case of detection
Teach-in indicatorTeach-In channel: LED green/yellow equiphase flashing; 2.5 Hz . Teach-In tolerance: LED green/yellow non equiphase flashing; 2.5 Hz .
Control elements2 Teach-In rotary switch for Teach-In channel and Teach-In tolerance .
Electrical specifications
Operating voltage10 ... 30 V DC
Ripple10 %
No-load supply current≤ 40 mA
Protection classII, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1
Input
Function inputExt. Teach-In input (ET)
Ext. blanking-input (AT)
Output
Signal output3 push-pull (4 in 1) outputs, short-circuit proof, reverse polarity protected
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA
Switching frequency500 Hz
Response time1 ms
Timer functionImpulsed time element off-delay 20 ms
Conformity
Product standardEN 60947-5-2
Approvals and certificates
EAC conformityTR CU 020/2011
CCC approvalCCC approval / marking not required for products rated ≤36 V
ApprovalsCE, cULus
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-20 ... 75 °C (-4 ... 167 °F)
Mechanical specifications
Degree of protectionIP67
Connection8-pin, M12 metal connector, 90° convertible
Material
HousingFrame: nickel plated, die cast zinc,
Laterals: glass-fiber reinforced plastic PC
Optical facePlastic pane
Mass60 g
Dimensions
Height49 mm
Width41.5 mm
Depth15 mm
Note(use V19 type connection cable )

Classifications

SystemClasscode
ECLASS 13.027270907
ECLASS 12.027270907
ECLASS 11.027270907
ECLASS 10.0.127270907
ECLASS 9.027270907
ECLASS 8.027270907
ECLASS 5.127270907
ETIM 9.0EC001817
ETIM 8.0EC001817
ETIM 7.0EC001817
ETIM 6.0EC001817
ETIM 5.0EC001817
UNSPSC 12.139121528

Details: DF12-11-3K/9s20/145/151

Product Documentation: DF12-11-3K/9s20/145/151

Language Selection:
Brief Instructions語言檔案類型檔案尺寸
Instruction leaflet / BeipackzettelALLPDF395 KB

Design / Simulation: DF12-11-3K/9s20/145/151

Language Selection:
CAD語言檔案類型檔案尺寸
CAD 3-D / CAD 3-DALLSTP200 KB
CAD Portal / CAD PortalALLLINK---
CAE
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZALLEDZ74 KB

Approvals: DF12-11-3K/9s20/145/151

Language Selection:
Declaration of Conformity證書號碼語言檔案類型檔案尺寸
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-1797DALLPDF227 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-6929ALLPDF224 KB

相關產品: DF12-11-3K/9s20/145/151

Accessories
Female cordset single-ended M12 straight A-coded, 8-pin, PUR cable grey, shieldedfa
General Notes Relating to Pepperl+Fuchs Product Information

台灣倍加福有限公司
信義路5段150巷2號21樓之4
信義區
11059 台北市 臺灣
臺灣
fa-info@tw.pepperl-fuchs.com
phone +886 2 27227708

© 2024 版權所有

Pepperl+Fuchs 倍加福是領先全球的電子感測器 和 零組件的開發與製造商. 超過七十年的不斷創新、穩定的品質與持續的業績增長，成就了今日的我們， Pepperl+Fuchs 倍加福在全球擁有 6,300 名員工，並在德國、美國、新加坡、匈牙利、印尼和越南都設有製造工廠，其中多數工廠已通過 ISO 9001 認證