工業感測器服務資訊
+886 2 27227708
+886-2-27227782
防爆產品服務資訊

Wireless Access Point (Ex d) GUB3L.I.CP-Y*

GUB3L.I.CP-Y*
  • Aluminum alloy
  • Installation in Zone 1, Zone 2, Zone 21 and Zone 22
  • Ex d and Ex tb certified
  • Gas group IIC
  • Use of industrial Wireless Access Points in hazardous areas
  • External antennas for best possible signal dispersion
  • Customizable configuration of WI-FI and network devices and cable entries as per specification
  • Image and drawing are generic for this device type and may deviate from the specific variant

请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。

將完整的規格書下載為PDF:


產品規格摘要:的技術資料  GUB3L.I.CP-Y*

產品描述
Wireless Access Point in aluminum alloy enclosure for use in explosion-hazardous areas
Electrical specifications
Operating voltage1500 V DC / 1000 V AC max.
Operating currentrecommended: 1600 A max.
Mechanical specifications
Thread typemetric ISO pitch 1.5 mm or NPT ANSI ASME B1.20.1
Enclosure coverthreaded round cover
Cover fixingflamepath thread
Cover sealnone, O-ring for IP66/67
Degree of protectionIP66 (IP66/IP67 with O-ring)
Material
Enclosurealuminum alloy
Finishepoxy coated RAL 7005 (grey)
O-Ringsilicone
Mass21 kg
Dimensions360 mm x 360 mm x 219 mm
values might differ slightly due to casting and manufacturing tolerances
Mountingsee datasheets of relevant enclosures
GroundingM6 external grounding points
Ambient conditions
Ambient temperature-40 ... 50 °C (-40 ... 122 °F)
depending on integrated components
Data for application in connection with hazardous areas
EU-type examination certificateINERIS 14 ATEX 0035X
MarkingEx-Hexagon II 2 GD
Ex db IIC T* Gb
Ex tb IIIC T** °C Db
T6/T85 °C
T5/T100 °C
T4/T135 °C
T3/T200 °C
depending on configuration, ambient temperature and built-in power loss
International approvals
IECEx approvalIECEx INE 14.0042X
Further approvalsavailable on request
Conformity
Degree of protectionEN 60529
CE marking0080 or 0102, see type label
General information
Ordering informationThis Wireless Access Point solution will be delivered completely configured and assembled ready for use. For configuration details please contact customer service.
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
General specifications
Installed componentsAll major WI-FI Access Point vendors such as Aruba, Cisco, ect.

Classifications

SystemClasscode
ECLASS 13.027180502
ECLASS 12.027180502
ECLASS 11.027180502
ECLASS 10.0.127180502
ECLASS 9.027180502
ECLASS 8.027180508
ECLASS 5.127180502
ETIM 9.0EC002503
ETIM 8.0EC002503
ETIM 7.0EC002503
ETIM 6.0EC002503
ETIM 5.0EC002503
UNSPSC 12.139121314

Details: GUB3L.I.CP-Y*

Product Documentation: GUB3L.I.CP-Y*

Language Selection:
Brief Instructions語言檔案類型檔案尺寸
Brief Instructions - GUB* / GUBX*ENGPDF316 KB

Approvals: GUB3L.I.CP-Y*

Language Selection:
Certificates證書號碼語言檔案類型檔案尺寸
Europe INERIS ATEXINERIS 14 ATEX 0035XALLPDF529 KB
Worldwide INERIS IECEx Certificate of ConformityIECEx INE 14.0042XALLLINK---