Temperature Converter S1SD-1TI-1U

1-channel signal conditioner
24 V DC supply
Thermocouple, RTD, potentiometer or mV input
Input for PTC thermistor
Current and voltage output
Line fault (LFD) and sensor burnout detection
Accuracy 0.1 %
Connection via screw terminals

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Software
配套产品

请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。

將完整的規格書下載為PDF:

產品規格摘要：的技術資料 S1SD-1TI-1U

General specifications
Signal type		Analog input
Operation time		MTBF: 353 a acc. to SN 29500 stationary continuous operating, average ambient temperature 40 °C (104 °F)
Supply
Connection		Power Bus or terminals 1-, 2+
Rated voltage		16.8 ... 31.2 V DC
Power dissipation		0.7 W
Power consumption		0.8 W
Interface
Programming interface		programming socket
Input
Connection side		field side
Connection		terminals 5, 6, 7, 8
PTC		type KT, KTY, ST
	Measuring current	approx. 200 µA
	Types of measuring	2-, 3-, 4-wire connection
	Lead resistance	≤ 100 Ω per line
	Measurement loop monitoring	sensor breakage, lead breakage, short circuit
RTD		type Pt100, Pt200, Pt500, Pt1000 (EN 60751:1995) type Ni100, Ni200, Ni500, Ni1000 (DIN 43760)
	Measuring current	approx. 200 µA
	Types of measuring	2-, 3-, 4-wire connection
	Lead resistance	max. 100 Ω per line
	Measurement loop monitoring	sensor breakage, lead breakage, short circuit
Thermocouples		type B, E, J, K, N, S, T (IEC 584-1:1995) type L, U (DIN 43710:1985) type C, D (ASTM E988)
	Cold junction compensation	external (Pt100) and internal , manually
	Lead resistance	max. 10 kΩ
	Measurement loop monitoring	sensor breakage, lead breakage
Resistor
	Measuring range	0 ... 5 kΩ
Potentiometer		0.2 ... 50 kΩ
	Types of measuring	3-wire connection
Voltage		-100 ... 100 mV -1000 ... 1000 mV
Input resistance		≥ 1 MΩ
Output
Connection side		control side
Connection		terminals 3-, 4+
Analog voltage output		0/1 ... 5 V , 0/2 ... 10 V , load ≥ 2 kΩ
Analog current output		0/2 ... 10 mA, 0/4 ... 20 mA, load ≤ 600 Ω
Ripple		≤ 10 mV _eff
Fault signal		downscale or upscale
Transfer characteristics
Accuracy		max. 0.1 % of full-scale value
Measuring time		≤ 300 ms
Deviation
	RTD	< 0.1 K/0.05 % of the measured value
	Thermocouples	< 0.3 K/0.1 % of the measured value
	Voltage	< 0.1 % of the measured value
	Potentiometer	< 0.02 % of the measured value
Influence of ambient temperature		< 100 ppm/K of full-scale value
Galvanic isolation
Output/power supply		safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff test voltage 3 kV, 50 Hz, 1 min
Input/Other circuits		safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff test voltage 3 kV, 50 Hz, 1 min
Indicators/settings
Control elements		DIP switch keys
Configuration		via DIP switches via keys via software
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Degree of protection		IEC 60529:2001
Protection against electrical shock		EN 61010-1:2010
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Damaging gas		designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Core cross section		0.5 ... 2.5 mm² (20 ... 14 AWG)
Mass		approx. 70 g
Dimensions		6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) (W x H x D) , housing type S1
	Height	97 mm
	Width	6.2 mm
	Depth	107 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
Certificate		DEMKO 16 ATEX 1750X
	Marking	II 3G Ex nA IIC T4 Gc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-15:2010
International approvals
UL approval		E106378
IECEx approval
	IECEx certificate	IECEx UL 16.0116X
	IECEx marking	Ex nA IIC T4 Gc
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210129
ECLASS 12.0	27210129
ECLASS 11.0	27210129
ECLASS 10.0.1	27210129
ECLASS 9.0	27210129
ECLASS 8.0	27210190
ECLASS 5.1	27210107
ETIM 9.0	EC002919
ETIM 8.0	EC002919
ETIM 7.0	EC002919
ETIM 6.0	EC002919
ETIM 5.0	EC001485
UNSPSC 12.1	32101514

Details: S1SD-1TI-1U

Informative Literature: S1SD-1TI-1U

Literature	語言	檔案類型	檔案尺寸
Application Report - Sand Trap and Preliminary Sedimentation Stage	ENG	PDF	448 KB
Product Overview SC-System	ENG	PDF	456 KB
Tender text
Tender text	ENG	D81	8 KB

Product Documentation: S1SD-1TI-1U

Brief Instructions	語言	檔案類型	檔案尺寸
Brief instructions	ENG	PDF	282 KB
Safety and Security Documentation
Instruction manual	ENG	PDF	136 KB
Manuals
System Manual	ENG	PDF	2706 KB

Design / Simulation: S1SD-1TI-1U

CAD	語言	檔案類型	檔案尺寸
CAD 3-D / CAD 3-D	ALL	STP	4814 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	97 KB
EPLAN macros SC-System devices (EDZ) / EPLAN-Makros SC-System-Geräte (EDZ)	ALL	ZIP	4082 KB

Approvals: S1SD-1TI-1U

Certificates	證書號碼	語言	檔案類型	檔案尺寸
Canada UL cUL	E106378 cUL (QUZW7)	ALL	LINK	---
Europe DEMKO ATEX Category 3 G	DEMKO 16 ATEX 1750X	ALL	PDF	1876 KB
UL Non-Sparking nA IECEx Certificate of Conformity	IECEx UL 16.0116X	ALL	LINK	---
USA UL	E106378 UL (QUZW)	ALL	LINK	---
Declaration of Conformity
EU Declaration of Conformity (P+F)	TDOC-0534EENG	ENG	PDF	180 KB

Software: S1SD-1TI-1U

Device Description Files/Drivers	發布資訊	檔案類型	檔案尺寸
DTM for S1SD-1TI-1U / DTM für S1SD-1TI-1U		ZIP	---
Software Tools
Configuration software for SC-System: SC-Config / Konfigurations Software für SC-System: SC-Config	3.4.0	ZIP	---
PACTware 4.1 SP6 / PACTware 4.1 SP6	4.1.0.53	ZIP	43327 KB
PACTware 5.0 / PACTware 5.0	5.0.5.31	ZIP	44203 KB

相關產品: S1SD-1TI-1U

Matching System Components

	S1SD-2PF Power Feed Module
	Interface for Power Bus, Supply current 3 A, LED status indication, Connection via screw terminalspa

	SC-Config Configuration software
	For SC-System, Free of charge, Internet download possiblepa

	S-ADP-USB Adapter with USB Interface
	Isolated USB interface cable, Used with SC-System devices, Configurable via PCpa

	PACTware 5.0 FDT Framework
	Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Download from Pepperl+Fuchs websitepa

	POWERBUS-SETL5.250 Power Bus for DIN Mouning Rail
	Bus carrier with bus PCB for 35 mm DIN mounting rail, height 7.5 mm, Provides DC supply voltage and the bus connection to all equipped SC-System modules, Standard length 250 mm (9.84 inch), simple to customize to application space, Eliminates daisy-chainspa

	POWERBUS-SETH5.250 Power Bus for DIN Mouning Rail
	Bus carrier with bus PCB for 35 mm DIN mounting rail, height 15 mm, Provides DC supply voltage and the bus connection to all equipped SC-System modules, Standard length 250 mm (9.84 inch), simple to customize to application space, Eliminates daisy-chainspa

	POWERBUS-COV.250 Cover for DIN Mounting Rail
	Cover for DIN mounting rail, Suitable for Power Bus, Standard length 250 mm (9.84 inch), simple to customize to application space, Packaging unit: 5 piecespa

	POWERBUS-CAP End Cap for Power Bus
	Fixing of the bus carrier with bus PCB in the DIN mounting rail, Termination of DIN mounting rail, Suitable for Power Bus, Packaging unit: 5 pieces left, 5 pieces rightpa

General Notes Relating to Pepperl+Fuchs Product Information

快速連結

台灣倍加福有限公司
信義路5段150巷2號21樓之4
信義區
11059 台北市臺灣
臺灣
fa-info@tw.pepperl-fuchs.com
phone +886 2 27227708

Pepperl+Fuchs 倍加福是領先全球的電子感測器 和 零組件的開發與製造商. 超過七十年的不斷創新、穩定的品質與持續的業績增長，成就了今日的我們， Pepperl+Fuchs 倍加福在全球擁有 6,300 名員工，並在德國、美國、新加坡、匈牙利、印尼和越南都設有製造工廠，其中多數工廠已通過 ISO 9001 認證