请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
將完整的規格書下載為PDF:
General specifications | ||
---|---|---|
Detection type | photoelectric sampling | |
Device type | Singleturn absolute rotary encoder with incremental output (sin/cos) | |
Functional safety related parameters | ||
Safety Integrity Level (SIL) | SIL 2 | |
Performance level (PL) | PL d | |
MTTFd | 1000 a | |
Mission Time (TM) | 20 a | |
PFHd | 4.6 E-10 | |
L10 | 70 E+9 at 1.5 rpm | |
Diagnostic Coverage (DC) | 99.7 % | |
Electrical specifications | ||
Operating voltage | 24 V DC ± 25 % | |
No-load supply current | max. 100 mA | |
Time delay before availability | < 250 ms | |
Output code | Gray code | |
Code course (counting direction) | cw ascending (clockwise rotation, code course ascending) | |
Interface | ||
Interface type | SSI + incremental track (sin/cos) | |
Monoflop time | ≤ 15 µs | |
Resolution | ||
Single turn | 13 Bit | |
Overall resolution | 13 Bit | |
Transfer rate | max. 500 kBit/s | |
Standard conformity | RS 422 | |
Input 1 | ||
Input type | Selection of counting direction (cw/ccw) | |
Signal voltage | ||
High | 4.5 ... 24 V | |
Low | 0 ... 2 V | |
Input current | < 6 mA | |
Switch-on delay | < 20 ms | |
Input 2 | ||
Input type | zero-set (PRESET 1) | |
Signal voltage | ||
High | 4.5 ... 24 V | |
Low | 0 ... 2 V | |
Input current | < 6 mA | |
Signal duration | min. 10 ms | |
Switch-on delay | < 20 ms | |
Output | ||
Output type | sine / cosine | |
Pulses | 2048 | |
Amplitude | 1 Vss ± 10 % | |
Load current | max. per channel 10 mA , conditionally short-circuit proof (not with Ub), reverse polarity protected | |
Output frequency | max. 200 kHz (3 dB limit) | |
Connection | ||
Connector | type 9416L (M23), 12-pin | |
Standard conformity | ||
Degree of protection | DIN EN 60529, IP65 | |
Climatic testing | DIN EN 60068-2-3, no moisture condensation | |
Salt spray test | DIN EN 60068-2-52 , 672 h | |
Emitted interference | EN IEC 61000-6-4:2019 | |
Noise immunity | EN IEC 61000-6-2:2019 | |
Shock resistance | DIN EN 60068-2-27, 100 g, 6 ms | |
Vibration resistance | DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz | |
Functional safety | IEC/EN 61508:2010 EN 62061/A2:2015 EN 61326-3-1:2008 EN 61800-5-2:2016 Suitable up to SIL 2, PL d, see leaflet. |
|
Approvals and certificates | ||
TÜV approval | Cert. no. Z10 17 03 68273 002 | |
Ambient conditions | ||
Operating temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Material | ||
Housing | 3.2315 aluminum | |
Flange | 3.2315 aluminum | |
Shaft | Stainless steel 1.4404 / AISI 316L | |
Mass | approx. 220 g | |
Rotational speed | max. 10 min -1 | |
Moment of inertia | ≤ 80 gcm2 | |
Starting torque | < 10 Ncm | |
Shaft load | ||
Radial offset | max. 0.04 mm | |
Dimensions | ||
Length | 52 mm | |
Diameter | 58 mm |
System | Classcode |
---|---|
ECLASS 13.0 | 27270502 |
ECLASS 12.0 | 27270502 |
ECLASS 11.0 | 27270502 |
ECLASS 10.0.1 | 27270502 |
ECLASS 9.0 | 27270502 |
ECLASS 8.0 | 27270502 |
ECLASS 5.1 | 27270502 |
ETIM 9.0 | EC001486 |
ETIM 8.0 | EC001486 |
ETIM 7.0 | EC001486 |
ETIM 6.0 | EC001486 |
ETIM 5.0 | EC001486 |
UNSPSC 12.1 | 39121527 |
Brief Instructions | 語言 | 檔案類型 | 檔案尺寸 |
---|---|---|---|
Instruction leaflet / Beipackzettel | ALL | 1306 KB | |
Safety and Security Documentation | |||
Instruction manual | ENG | 149 KB |
Declaration of Conformity | 證書號碼 | 語言 | 檔案類型 | 檔案尺寸 |
---|---|---|---|---|
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-3264 | ALL | 49 KB |