请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
ENA58IL-R***-J1939
General specifications |
Detection type | magnetic sampling |
Device type | Absolute rotary encoder |
Linearity error | ≤ ± 0.1 ° |
UL File Number | E223176 "For use in NFPA 79 Applications only" , if UL marking is marked on the product. |
Functional safety related parameters |
MTTFd | 480 a at 40 °C |
Mission Time (TM) | 20 a |
L10 | 5 E+8 revolutions at 24/198 N axial/radial shaft load |
Diagnostic Coverage (DC) | 0 % |
Indicators/operating means |
LED green | Operating mode |
LED red | wrong baud rate |
Electrical specifications |
Operating voltage | 9 ... 30 V DC (with galvanic isolation) |
Power consumption | ≤ 1.2 W |
Time delay before availability | < 250 ms |
Output code | binary code |
Code course (counting direction) | adjustable |
Interface |
Interface type | J1939 |
Resolution | |
| Single turn | up to 16 Bit |
| Multiturn | up to 15 Bit |
| Overall resolution | up to 31 Bit |
Transfer rate | min. 20 kBit/s , max. 1 MBit/s |
Cycle time | ≥ 1 ms |
Standard conformity | ISO 11898 |
Connection |
Connector | M12 connector, 5 pin |
Cable | ∅6 mm, 4 x 2 x 0.14 mm2 |
Standard conformity |
Degree of protection | DIN EN 60529, IP65 or IP67 |
Climatic testing | DIN EN 60068-2-3, no moisture condensation |
Emitted interference | EN 61000-6-4:2007 |
Noise immunity | EN 61000-6-2:2005 |
Shock resistance | DIN EN 60068-2-27, 200 g, 6 ms |
Vibration resistance | DIN EN 60068-2-6, 20 g, 10 ... 1000 Hz |
Approvals and certificates |
UL approval | cULus Listed, General Purpose, Class 2 Power Source , if UL marking is marked on the product. |
Ambient conditions |
Operating temperature | cable, movable installation: -5 ... 70 °C (23 ... 158 °F), cable, fixed installation: -30 ... 70 °C (-22 ... 158 °F) connector models: -40 ... 85 °C (-40 ... 185 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Relative humidity | 98 % , no moisture condensation |
Mechanical specifications |
Material | |
| Housing | nickel-plated steel , painted |
| Flange | Aluminum |
| Shaft | Stainless steel |
Mass | approx. 300 g |
Rotational speed | max. 12000 min -1 |
Moment of inertia | 50 gcm2 |
Starting torque | < 5 Ncm |
Shaft load | |
| Axial | 24 N |
| Radial | 198 N |
| Angle offset | ± 0.9 ° |
| Axial offset | ± 0.3 mm static |
| Radial offset | ± 0.5 mm static |
Dimensions | |
| Diameter | 58 mm |
Classifications
System | Classcode |
ECLASS 13.0 | 27270502 |
ECLASS 12.0 | 27270502 |
ECLASS 11.0 | 27270502 |
ECLASS 10.0.1 | 27270502 |
ECLASS 9.0 | 27270502 |
ECLASS 8.0 | 27270502 |
ECLASS 5.1 | 27270502 |
ETIM 9.0 | EC001486 |
ETIM 8.0 | EC001486 |
ETIM 7.0 | EC001486 |
ETIM 6.0 | EC001486 |
ETIM 5.0 | EC001486 |
UNSPSC 12.1 | 39121527 |
Details:
ENA58IL-R***-J1939
Product Documentation:
ENA58IL-R***-J1939
Design / Simulation:
ENA58IL-R***-J1939
Approvals:
ENA58IL-R***-J1939
相關產品:
ENA58IL-R***-J1939
Accessories |
|
|
|
DeviceNet/CANOpen bus cable female cordset single-ended M12 straight A-coded 5-pin, PUR cable 4-core twisted pairs black, shielded, UL approved, drag chain suitable, outdoorfa |
|
|
|
|
DeviceNet/CANOpen bus cable female cordset single-ended M12 straight A-coded 5-pin, PUR cable 4-core twisted pairs black, shielded, UL approved, drag chain suitable, outdoorfa |
|
|
|
|
DeviceNet/CANOpen bus cable female cordset single-ended M12 straight A-coded 5-pin, PUR cable 4-core twisted pairs black, shielded, UL approved, drag chain suitable, outdoorfa |
|
|
|
|
Accessory kit for ∅58 absolute rotary encoder with recessed hollow shaft 15 mmfa |
|
|
|
|
Accessories set for ∅58 absolute rotary encoder with recessed hollow shaft 14 mmfa |
|
|
|
|
Accessories set for ∅58 absolute rotary encoder with recessed hollow shaft 12 mmfa |
|
|
|
|
Accessory kit for ∅58 absolute rotary encoder with recessed hollow shaft 10 mmfa |
|