Multiturn absolute rotary encoder FVM58

Industrial standard housing ∅58 mm
25-bit multiturn
Output code: gray and binary
Short-circuit proof push-pull output
Inputs for selecting counting direction, LATCH, and PRESET
Code change frequency up to 400 kHz
Servo or clamping flange

Technical Data
Product Documentation
Approvals
配套产品

请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。

將完整的規格書下載為PDF:

產品規格摘要：的技術資料 FVM58

Electrical specifications
Operating voltage		10 ... 30 V DC
No-load supply current		max. 140 mA
Power consumption		≤ 2.5 W , without output drivers
Linearity		± 0.5 LSB
Output code		Gray code, binary code
Code course (counting direction)		cw ascending (clockwise rotation, code course ascending)
Code preparation time		0.3 ms
Interface
Interface type		Push-pull, parallel , short-circuit protected
Resolution
	Multiturn	25 Bit
Load current		20 mA
Voltage drop		≤ 2.5 V
Signal voltage
	High	operating voltage minus voltage drop
	Low	≤ 2.8 V
Rise time		300 ns
De-energized delay		300 ns
Code change frequency		400 kHz
Input 1
Input type		Selection of counting direction (cw/ccw)
Signal voltage
	High	10 ... 30 V
	Low	0 ... 2 V
Input current		< 6 mA
Signal duration		min. 10 ms
Input 2
Input type		Temporary storage (LATCH)
Signal voltage
	High	10 ... 30 V
	Low	0 ... 2 V
Input current		< 6 mA
Signal duration		min. 100 µs
Switch-on delay		< 0.1 ms
Switch-off delay		< 0.1 ms
Input 3
Input type		zero-set (PRESET)
Signal voltage
	High	10 ... 30 V
	Low	0 ... 2 V
Input current		< 6 mA
Signal duration		min. 10 ms
Switch-on delay		< 1 ms
Connection
Connector		type 9426, 26-pin
Cable		∅9 mm, 15 x 2 x 0.14 mm², 2 m
Standard conformity
Degree of protection		DIN EN 60529, IP65
Climatic testing		DIN EN 60068-2-3, no moisture condensation
Emitted interference		EN 61000-6-4:2007
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 100 g, 6 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature		-40 ... 85 °C (-40 ... 185 °F) cable models: -30 ... 70 °C (fixed installation) -5 ... 70 °C (movable installation)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F) (cable models: -5 ... 70 °C)
Mechanical specifications
Material
	Combination 1	housing: powder coated aluminum flange: aluminum shaft: stainless steel
	Combination 2 (Inox)	housing: stainless steel flange: stainless steel shaft: stainless steel
Mass		approx. 400 g (combination 1) approx. 800 g (combination 2)
Rotational speed		max. 12000 min ^-1
Moment of inertia		30 gcm²
Starting torque		≤ 5 Ncm
Shaft load
	Axial	40 N
	Radial	110 N

Classifications

System	Classcode
ECLASS 13.0	27270502
ECLASS 12.0	27270502
ECLASS 11.0	27270502
ECLASS 10.0.1	27270502
ECLASS 9.0	27270502
ECLASS 8.0	27270502
ECLASS 5.1	27270502
ETIM 9.0	EC001486
ETIM 8.0	EC001486
ETIM 7.0	EC001486
ETIM 6.0	EC001486
ETIM 5.0	EC001486
UNSPSC 12.1	39121527

Details: FVM58

Product Documentation: FVM58

Brief Instructions	語言	檔案類型	檔案尺寸
Instruction leaflet / Beipackzettel	ALL	PDF	176 KB

Approvals: FVM58

Certificates	證書號碼	語言	檔案類型	檔案尺寸
US CA UL	CoC 20190913-E223176 RptRef E223176-20081013	ALL	PDF	280 KB

相關產品: FVM58

Accessories

	9203 Angled flange
	Angled flangefa

	9426 Female cordset
	fa

	9310-3 Synchro clamping element
	Synchro clamping elementfa

	9300 Mounting bracket for servo flange
	Mounting bracket for servo flangefa

	KW-10/10 Coupling
	Helical coupling, Universally suitable for backlash-free rotation transmission, Vibration- isolating, Optimall misalignment compensation, Medium torsion spring stiffness, Small reset forcesfa

	KW-6/10 Coupling
	Helical coupling, Universally suitable for backlash-free rotation transmission, Vibration- isolating, Optimall misalignment compensation, Medium torsion spring stiffness, Small reset forcesfa

	KW-6/6 Coupling
	Helical coupling, Universally suitable for backlash-free rotation transmission, Vibration- isolating, Optimall misalignment compensation, Medium torsion spring stiffness, Small reset forcesfa

	KW-6/8 Coupling
	Helical coupling, Universally suitable for backlash-free rotation transmission, Vibration- isolating, Optimall misalignment compensation, Medium torsion spring stiffness, Small reset forcesfa

	9404 10*10 Coupling
	Spring disk coupling, Very high torsion spring stiffness, Suitable up to 12.000 rpm, Well misalignment compensation, Vibration- isolating, Electrically insulatingfa

	9404 6*6 Coupling
	Spring disk coupling, Very high torsion spring stiffness, Suitable up to 12.000 rpm, Well misalignment compensation, Vibration- isolating, Electrically insulatingfa

	9409 10*10 Coupling
	Bellows coupling, Backlash-free, angle synchronous rotation transmission, Very high torsion spring stiffness, Material stainless steel and anodized aluminumfa

	9409 6*10 Coupling
	Bellows coupling, Backlash-free, angle synchronous rotation transmission, Very high torsion spring stiffness, Material stainless steel and anodized aluminumfa

	9409 6*6 Coupling
	Bellows coupling, Backlash-free, angle synchronous rotation transmission, Very high torsion spring stiffness, Material stainless steel and anodized aluminumfa

	9410 10*10 Coupling
	Precision coupling, Precision couplingfa

	9410 6*6 Coupling
	Precision coupling, Precision couplingfa

	MBT-36ALS Mounting bracket
	Spring-loaded mounting bracket with a diameter of 36 mm, Material: anodized aluminumfa

General Notes Relating to Pepperl+Fuchs Product Information

ENA58IL 磁性旋轉編碼器 - 探索工業標準旋轉編碼器的新基準。

磁性級精度。在任何條件下。- Pepperl+Fuchs 的磁性編碼器技術

台灣倍加福有限公司
信義路5段150巷2號21樓之4
信義區
11059 台北市臺灣
臺灣
fa-info@tw.pepperl-fuchs.com
phone +886 2 27227708

Pepperl+Fuchs 倍加福是領先全球的電子感測器 和 零組件的開發與製造商. 超過七十年的不斷創新、穩定的品質與持續的業績增長，成就了今日的我們， Pepperl+Fuchs 倍加福在全球擁有 6,300 名員工，並在德國、美國、新加坡、匈牙利、印尼和越南都設有製造工廠，其中多數工廠已通過 ISO 9001 認證