工業感測器服務資訊
+886 2 27227708
+886-2-27227782
防爆產品服務資訊
Multiturn absolute rotary encoder ENA42HD-S***-Analog
- Very small housing
- Sturdy construction
- 4 Bit multiturn
- Models with analog voltage or current output
- Highly shock / vibration and soiling resistant
- Increased shaft load capacity
- Stainless steel housing
- IP69K
请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。
將完整的規格書下載為PDF:
產品規格摘要：的技術資料 ENA42HD-S***-Analog
| 產品描述 |
|---|
| Heavy-duty encoder |
| General specifications | ||
|---|---|---|
| Detection type | magnetic sampling | |
| Device type | Multiturn absolute rotary encoder | |
| Measuring range | min. 0 ... 22.5 ° max. 16 x 360 ° |
|
| Resolution | 17 Bit (13 bits/revolution) | |
| UL File Number | E223176 "For use in NFPA 79 Applications only" , if UL marking is marked on the product. | |
| Electrical specifications | ||
| Operating voltage | 8 ... 32 V DC | |
| Current consumption | typ. 15 mA (with voltage output) typ. 20 mA (with current output) |
|
| Input 1 | ||
| Input type | lower limit of measuring range | |
| Signal voltage | ||
| High | 8 ... 32 V DC | |
| Signal duration | min. 1 s | |
| Input 2 | ||
| Input type | upper limit of measuring range | |
| Signal voltage | ||
| High | 8 ... 32 V DC | |
| Signal duration | min. 1 s | |
| Analog output | ||
| Output type | analog voltage output or analog current output (see type code) | |
| Default setting | rising ramp at ccw rotation | |
| Linearity error | ≤ 0.15 % | |
| Load resistor | min. 5000 Ω (with voltage output) , min. 500 Ω (with current output) ; Max. value for supply voltage 8 V. For higher supply voltage lower load resistance can be used. | |
| Connection | ||
| Connector | M12 connector, 5 pin | |
| Cable | 2 m fixed cable , 5-wire , screened | |
| Standard conformity | ||
| Degree of protection | IEC/EN 60529 | |
| Climatic testing | DIN EN 60068-2-3 , 95 % , no moisture condensation | |
| Emitted interference | EN 61000-6-4:2007 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Shock resistance | DIN EN 60068-2-27, 300 g, 6 ms | |
| Vibration resistance | DIN EN 60068-2-6, 30 g, 55 ... 2000 Hz | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose, Class 2 Power Source , if UL marking is marked on the product. | |
| Ambient conditions | ||
| Operating temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | 98 % , no moisture condensation | |
| Mechanical specifications | ||
| Flange | servo flange 42 mm with 4 x Threading M4 | |
| Shaft dimensions | 10 mm x 20 mm | |
| Degree of protection | IP65 / IP67 / IP68 / IP69k | |
| Material | ||
| Housing | Stainless steel 1.4404 / AISI 316L | |
| Flange | Stainless steel 1.4404 / AISI 316L | |
| Shaft | Stainless steel 1.4412 / AISI 440B | |
| Mass | approx. 350 g | |
| Rotational speed | max. 6000 min -1 | |
| Moment of inertia | 30 gcm2 | |
| Starting torque | < 5 Ncm | |
| Shaft load | ||
| Axial | 270 N | |
| Radial | 270 N | |
| Dimensions | ||
| Diameter | 42 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270502 |
| ECLASS 12.0 | 27270502 |
| ECLASS 11.0 | 27270502 |
| ECLASS 10.0.1 | 27270502 |
| ECLASS 9.0 | 27270502 |
| ECLASS 8.0 | 27270502 |
| ECLASS 5.1 | 27270502 |
| ETIM 9.0 | EC001486 |
| ETIM 8.0 | EC001486 |
| ETIM 7.0 | EC001486 |
| ETIM 6.0 | EC001486 |
| ETIM 5.0 | EC001486 |
| UNSPSC 12.1 | 39121527 |
Details: ENA42HD-S***-Analog
Product Documentation: ENA42HD-S***-Analog
| Brief Instructions | 語言 | 檔案類型 | 檔案尺寸 |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 1098 KB |
Design / Simulation: ENA42HD-S***-Analog
| CAD | 語言 | 檔案類型 | 檔案尺寸 |
|---|---|---|---|
| CAD Portal / CAD Portal | ALL | LINK | --- |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: ENA42HD-S***-Analog
| Certificates | 證書號碼 | 語言 | 檔案類型 | 檔案尺寸 |
|---|---|---|---|---|
| US CA UL | CoC 20190913-E223176 RptRef E223176-20081013 | ALL | 280 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-3163A | ALL | 78 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-7156 | ALL | 247 KB | |
Software: ENA42HD-S***-Analog
| Device Description Files/Drivers | 發布資訊 | 檔案類型 | 檔案尺寸 |
|---|---|---|---|
| EDS file CANopen encoders Cxx58 / EDS-Datei für CANopen-Drehgeber Cxx58 | ZIP | 3 KB |
台灣倍加福有限公司
信義路5段150巷2號21樓之4
信義區
11059 台北市 臺灣
臺灣
fa-info@tw.pepperl-fuchs.com
+886 2 27227708
© 2024 版權所有
Pepperl+Fuchs 倍加福是領先全球的電子感測器 和 零組件的開發與製造商. 超過七十年的不斷創新、穩定的品質與持續的業績增長，成就了今日的我們， Pepperl+Fuchs 倍加福在全球擁有 6,300 名員工，並在德國、美國、新加坡、匈牙利、印尼和越南都設有製造工廠，其中多數工廠已通過 ISO 9001 認證