工業感測器服務資訊
+886 2 27227708
+886-2-27227782
防爆產品服務資訊

Adapter AD.*.*.*.*.*

AD.*.*.*.*.*
  • Adapter male thread metric to female thread metric
  • Adapter male thread metric to female thread NPT
  • Metric and NPT versions available
  • Brass nickel-plated or stainless steel
  • Ex db, Ex eb and Ex tb certified
  • Suitable for operation in Zone 1, Zone 2, Zone 21 and Zone 22

请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。

將完整的規格書下載為PDF:


產品規格摘要:的技術資料  AD.*.*.*.*.*

Mechanical specifications
Thread typemetric ISO pitch 1.5 mm or NPT ANSI ASME B1.20.1
Thread size (TD)see data table
Thread type femalemetric ISO pitch 1.5 mm or NPT ANSI ASME B1.20.1
Thread size female (TF)see data table
Degree of protectionIP66 / IP68
Material
Finishinherent color silver
Washer gasketaramid fibers bonded with NBR
Adapterbrass nickel-plated or AISI 316 (1.4401) stainless steel
O-Ringchloroprene / neoprene or silicone
Masssee data table
Dimensionssee data table
Ambient conditions
Ambient temperaturechloroprene O-ring: -40 ... 100 °C (-40 ... 212 °F)
silicone O-ring: -60 ... 130 °C (-76 ... 266 °F)
washer gasket: -40 ... 80 °C (-40 ... 176 °F)
Service temperature might be limited by the use of O-rings or washer gaskets.
Data for application in connection with hazardous areas
EU-type examination certificateCESI 15 ATEX 029X
MarkingEx-Hexagon II 2 GD
Ex db IIC Gb
Ex eb IIC Gb
Ex tb IIIC Db
International approvals
IECEx approvalIECEx CES 15.0006X
UKCA approvalCML 22 UKEX 1267X
CCoE approvalPESO A/P/HQ/KA/104/5579 (P420366)
CCC approval2021312313000345
Conformity
Degree of protectionEN 60529
CE marking0102
General information
Scope of deliveryK01 - metric variants, individual component: Adapter , washer gasket , locknut , Brief instructions
K01 - NPT variants, individual component: Adapter , washer gasket , locknut , Brief instructions
Knn - packing unit with multiple components: Adapter , Brief instructions (1 copy)
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Classifications

SystemClasscode
ECLASS 13.027140805
ECLASS 12.027140805
ECLASS 11.027144435
ECLASS 10.0.127144435
ECLASS 9.027144435
ECLASS 8.027149112
ECLASS 5.127149112
ETIM 9.0EC000938
ETIM 8.0EC000938
ETIM 7.0EC000938
ETIM 6.0EC000441
ETIM 5.0EC000441
UNSPSC 12.131181702

Details: AD.*.*.*.*.*

Product Documentation: AD.*.*.*.*.*

Language Selection:
Brief Instructions語言檔案類型檔案尺寸
Brief Instructions - Adapters Series AD*ENGPDF197 KB
Safety and Security Documentation
Instruction manualENGPDF154 KB

Approvals: AD.*.*.*.*.*

Language Selection:
Certificates證書號碼語言檔案類型檔案尺寸
CCC Ex Certificate2021312313000345 (Bimed Teknik)ALLPDF1152 KB
CESI IECEx Certificate of ConformityIECEx CES 15.0006XALLLINK---
Europe CESI ATEX II 2GDCESI 15 ATEX 029XALLPDF509 KB
India PESO (India) CCOEA/P/HQ/KA/104/5962 (P543651)ALLPDF126 KB
UK-Type Examination CertificateCML 22UKEX1267XALLPDF150 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-3192BALLPDF269 KB
EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F)DOC-6761ALLPDF155 KB

相關產品: AD.*.*.*.*.*

Accessory of
Installation in Zone 1, 21, Installation in Class I, II, Division 1, Installation in Class III, Ex d housing for Ex d field devices, Cast aluminum housing, Loop powered, Direct mounting on HART or 4 mA ... 20 mA field device, Encapsulated antenna, Up to 8 field devices in multidroppa
Installation in Zone 0, 20, Installation in Class I, II, Division 1, Installation in Class III, Installation in Class I, Division 2, Ex i circuits for Ex i field devices, Cast aluminum housing, Loop powered, Direct mounting on HART or 4 mA ... 20 mA field device, Encapsulated antenna, Up to 8 field devices in multidroppa
Cast aluminum housing, Loop powered, Direct mounting on HART or 4 mA ... 20 mA field device, Encapsulated antenna, Up to 8 field devices in multidroppa