请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。
產品規格摘要：的技術資料
ICA-AI-RTD-IO-V1
| 產品描述 |
| IO-Link converter with temperature input for RTD resistance temperature sensors |
| General specifications |
| UL File Number | E223772 |
| Functional safety related parameters |
| MTTFd | 246 a |
| Indicators/operating means |
| LED 1 | Device status, diagnostics |
| LED 2 | IO-Link status |
| Electrical specifications |
| Rated operating voltage | 18 ... 30 V |
| Nominal voltage | 24 V DC |
| Nominal current | 230 mA |
| Current consumption | max. 15 mA |
| Surge protection | Category II |
| Interface |
| Interface type | IO-Link |
| IO-Link revision | 1.1 |
| Device ID | 0x0F0503 (984323) |
| Transfer rate | COM2 (38.4 kBit/s) |
| Min. cycle time | ≥ 10 ms |
| Process data width | 16 bits / 2 bytes |
| SIO mode support | no |
| Compatible master port type | A, B |
| Input |
| Suitable sensors | PT100, PT200, PT500, PT1000 |
| Number/Type | 1 analog input for RTD |
| Current loading capacity | max. 200 mA |
| Lead resistance | max. 50 Ω per conductor |
| Resolution | ADC: 24 Bit |
| Input filter | Average determination of process data, parameterizable |
| Temperature influence | 20 ppm/°K |
| Directive conformity |
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61000-6-2:2005, EN 61000-6-4:2007+A1:2011 |
| Standard conformity |
| Degree of protection | EN 60529:2000 |
| Fieldbus standard | IEC 61131-9 / IO-Link V1.1 |
| Emitted interference | EN 61000-6-4 |
| Noise immunity | EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-6 |
| Shock resistance | EN 60068, Part 2-6, Part 2-27 |
| Ambient conditions |
| Ambient temperature | -30 ... 70 °C (-22 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Relative humidity | max. 85 % |
| Climatic conditions | Climatic class 3K3 |
| Altitude | 0 ... 2000 m |
| Shock and impact resistance | 50 g, 11 ms, all axes |
| Pollution degree | 3 |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | IO-Link M12, A-coded
Input M12, A-coded |
| Material | |
| Contacts | Zinc, CuNi plated |
| Housing | Plastic PC + PBT |
| Mass | 44 g |
| Dimensions | |
| Height | 32.3 mm |
| Width | 16 mm |
| Length | 79.7 mm |
| Construction type | Field housing |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27242601 |
| ECLASS 12.0 | 27242601 |
| ECLASS 11.0 | 27242601 |
| ECLASS 10.0.1 | 27242601 |
| ECLASS 9.0 | 27242601 |
| ECLASS 8.0 | 27242601 |
| ECLASS 5.1 | 27242601 |
| ETIM 9.0 | EC001597 |
| ETIM 8.0 | EC001597 |
| ETIM 7.0 | EC001597 |
| ETIM 6.0 | EC001597 |
| ETIM 5.0 | EC001597 |
| UNSPSC 12.1 | 32151705 |
Details:
ICA-AI-RTD-IO-V1
Product Documentation:
ICA-AI-RTD-IO-V1
Design / Simulation:
ICA-AI-RTD-IO-V1
Approvals:
ICA-AI-RTD-IO-V1
Software:
ICA-AI-RTD-IO-V1
相關產品:
ICA-AI-RTD-IO-V1
| Accessory of |
|
|
|
| Ethernet IO-Link module with 8 inputs/outputsfa |
|
|
|
|
| Ethernet IO-Link module with 8 inputs/outputsfa |
|
|
|
|
| EtherNet/IP IO-Link master with 8 inputs/outputsfa |
|
|
|
|
|
| PROFINET IO IO-Link master with 8 inputs/outputsfa |
|
|
|
|
| EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa |
|
|
|
|
|
| PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa |
|
|
|
|
|
| Ethernet IO-Link master with PROFINET S2 redundancyfa |
|
|
|
|
|
| Firmware variant from ICE3-8IOL-G65L-V1D with Modbus enabled by defaultfa |
|
|
|
|
| EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, push-in connectorsfa |
|
|
|
|
|
| PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, push-in terminalsfa |
|
|
|
|
|
| EtherNet/IP and Modbus IO-Link master with 4 x IO-Link Class A and 4 x IO-Link Class B portsfa |
|
|
|
|
|
| PROFINET and Modbus IO-Link master with 4 x IO-Link Class A and 4 x IO-Link Class B portsfa |
|
|
|
|
| Ethernet IO-Link module with eight IO-Link portsfa |
|
|
|
|
|
| Ethernet IO-Link module with 4x Class A and 4x Class B IO-Link portsfa |
|
| Accessories |
|
|
|
| torque screwdriver (0.6 Nm)fa |
|
|
|
|
| plug-in cap M12fa |
|
|
|
|
| IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa |
|
+886 2 27227708