请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
HiSHPSM/32/TB-02
Supply |
Nominal voltage | 24 V DC |
Fusing | 100 mA , 5 x 20 mm (0.2 x 0.8 inch) |
Power dissipation | 0.7 W , with Multiplexer |
Reverse polarity protection | yes |
HART signal channels (intrinsically safe) |
HART signal channels | |
| Number of channels | 32 unbalanced signal loops |
Interface |
Type/number | 2 x RS-485 |
Redundancy |
Supply | yes |
Galvanic isolation |
HART signal channels | 30 V DC |
Ambient conditions |
Ambient temperature | -20 ... 55 °C (-4 ... 131 °F) |
Relative humidity | 5 ... 90 %, non-condensing |
Mechanical specifications |
Core cross section | 2.5 mm2 (16 AWG) |
Connection | field side: screw terminals control side: screw terminals/Sub-D socket 2 x 37-pin RS 485 interface: removable screw terminals power: removable screw terminals |
Mass | approx. 700 g |
Dimensions | 300 x 127 x 186 mm (11.8 x 5 x 7.3 inch) (W x H x D) , depth including module assembly with HiDMux2700 |
| Height | 127 mm |
| Width | 300 mm |
| Depth | 186 mm |
Mounting | DIN rail mounting |
General information |
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Classifications
System | Classcode |
ECLASS 13.0 | 27210190 |
ECLASS 12.0 | 27210190 |
ECLASS 11.0 | 27210190 |
ECLASS 10.0.1 | 27210190 |
ECLASS 9.0 | 27210190 |
ECLASS 8.0 | 27210190 |
ECLASS 5.1 | 27242690 |
ETIM 9.0 | EC001485 |
ETIM 8.0 | EC001485 |
ETIM 7.0 | EC001485 |
ETIM 6.0 | EC001485 |
ETIM 5.0 | EC001485 |
UNSPSC 12.1 | 39121008 |
Details:
HiSHPSM/32/TB-02
Product Documentation:
HiSHPSM/32/TB-02
Approvals:
HiSHPSM/32/TB-02
相關產品:
HiSHPSM/32/TB-02
Accessory of |
|
|
|
32-channel, 24 V DC supply, HART field device input (revision 5 to 7), RS-485 interface, Up to SIL 3 acc. to IEC/EN 61508pa |
|