| General specifications |
| Measuring range | X = 40 ... 160 mm ; Z = 60 ... 350 mm |
| Light source | laser diode |
| Light type | red laser + Integrated LED lightning red 650 nm |
| Laser nominal ratings | |
| Note | VISIBLE LASER RADIATION , DO NOT STARE INTO BEAM
DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS |
| Laser class | 1 |
| Wave length | Measuring laser: 660 nm |
| Pulse length | Measuring laser: 0.5 ms |
| Maximum optical power output | Measuring laser: 15 mW |
| Laser monitoring | The safety system switches off the laser when the laser current is too high |
| Scan rate | 10 s-1 |
| Resolution | X>0.44 mm; Z>0.4 mm at 60 mm distanc
X>1.1 mm; Z>1.1 mm at 200 mm distanc
X>1.9 mm; Z>2.5 mm at 350 mm distanc
|
| Functional safety related parameters |
| MTTFd | 20 a |
| Mission Time (TM) | 10 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Operation indicator | LED green |
| Diagnostics indicator | LED yellow / red |
| Function indicator | Trigger: LED yellow ; object detected : LED red / green |
| Control elements | 2 push-buttons |
| Electrical specifications |
| Operating voltage | 24 V ± 20 % , PELV |
| No-load supply current | max. 250 mA |
| Power consumption | max. 6 W , Outputs without load |
| Interface |
| Interface type | RS 485 interface |
| Physical | Switchable terminal resistor |
| Protocol | binary code |
| Transfer rate | 38400 ... 230400 Bit/s |
| Input |
| Input voltage | 24 V |
| Number/Type | External triggering + 1 Input |
| Switching threshold | low: < 2.5 V, high: > 8 V |
| Output |
| Number/Type | 2 digital outputs |
| Switching type | PNP |
| Switching voltage | 24 V |
| Switching current | 150 mA each output |
| Compliance with standards and directives |
| Standard conformity | |
| Noise immunity | EN 61000-6-2:2005 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 |
| Degree of protection | EN 60529 |
| Shock and impact resistance | EN 60068-2-27:2009 |
| Laser class | IEC 60825-1:2007 |
| Approvals and certificates |
| UL approval | cULus Listed, Type 1 enclosure |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Approvals | CE |
| Ambient conditions |
| Operating temperature | -20 ... 45 °C (-4 ... 113 °F) , (noncondensing; prevent icing on the lens!) |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | 8-pin, M12 x 1 connector ( supply + RS485 + Inputs/Outputs ) ; can be rotated 90° ; Grounding : Grounding clip for PCV system |
| Material | |
| Housing | PC/ABS |
| Optical face | Plastic pane |
| Mass | approx. 125 g |
| Tightening torque, fastening screws | max. 2 Nm |
| Dimensions | |
| Height | 85 mm |
| Width | 38 mm |
| Depth | 55 mm |
| General information |
| Note | Security Instructions:
- Read the operating instructions before attempting commissioning
- Installation, connection and adjustments should only be undertaken by specialist personnel
- Not a safety component in accordance with the EU Machinery Directive |
+886 2 27227708