Power Feed Module KFD2-EB2.SP

Interface for Power Rail
Supply current ≤ 4 A
Replaceable fuse
Relay contact output, reversible
LED status indication
Connection via spring terminals with push-in connection technology

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
配套产品

请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。

將完整的規格書下載為PDF:

產品規格摘要：的技術資料 KFD2-EB2.SP

產品描述
Power feed module with spring terminals

Supply
Connection		terminals 11+, 12- terminals 8+, 9-
Rated voltage		20 ... 30 V DC The maximum rated operating voltage of the devices plugged onto the Power Rail must not be exceeded.
Fusing		5 AT/250 V AC recommended maximum utilization of the fuse: 80 %
Power dissipation		≤ 1 W
Output
Connection		Power Rail
Output current		max. 4 A
Output voltage		U_i ≥ rated voltage U_r = U_i - 0.6 V
Fault signal		relay output: NO contact
Contact loading		30 V AC/ 2 A / cos φ ≥ 0.7 ; 40 V DC/ 2 A
Energized/De-energized delay		approx. 20 ms / approx. 20 ms
Indicators/settings
Display elements		LEDs
Control elements		DIP switch
Configuration		via DIP switches
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2006
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection		IP20
Connection		spring terminals
Mass		approx. 100 g
Dimensions		20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
Certificate		UL 22 ATEX 2853 X
	Marking	II 3G Ex ec nC IIC T4 Gc
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN IEC 60079-7:2015+A1:2018 , EN IEC 60079-15:2019
International approvals
FM approval		FM 22 US 0031 X
	Control drawing	116-0160
UL approval		E106378
CSA approval		CoC 1051840
IECEx approval
	IECEx certificate	IECEx UL 16.0051X
	IECEx marking	Ex ec nC IIC T4 Gc
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210119
ECLASS 12.0	27210119
ECLASS 11.0	27210119
ECLASS 10.0.1	27210119
ECLASS 9.0	27210119
ECLASS 8.0	27210119
ECLASS 5.1	27210119
ETIM 9.0	EC002653
ETIM 8.0	EC002653
ETIM 7.0	EC002653
ETIM 6.0	EC002653
ETIM 5.0	EC002542
UNSPSC 12.1	39121004

Details: KFD2-EB2.SP

Informative Literature: KFD2-EB2.SP

Literature	語言	檔案類型	檔案尺寸
Application Report - Biological Cleaning of Wastwater and Secondary Sedimentation Stage	ENG	PDF	566 KB
Application Report - Generating Electricity in Coal-Fired Power Plants	ENG	PDF	412 KB
Application Report - Sand Trap and Preliminary Sedimentation Stage	ENG	PDF	448 KB
Application Report - Screening Systems in Sewage Treatment Plants	ENG	PDF	577 KB

Product Documentation: KFD2-EB2.SP

Brief Instructions	語言	檔案類型	檔案尺寸
Instruction leaflet / Beipackzettel	ALL	PDF	79 KB
Safety and Security Documentation
Instruction manual	ENG	PDF	164 KB
Manuals
Manual	ENG	PDF	3685 KB

Design / Simulation: KFD2-EB2.SP

CAD	語言	檔案類型	檔案尺寸
CAD 3-D / CAD 3-D	ALL	STP	2510 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: KFD2-EB2.SP

Certificates	證書號碼	語言	檔案類型	檔案尺寸
Canada CSA	CoC 1051840 C	ALL	PDF	43 KB
China SITIIAS CCC Ex Certificate	2024322303005906 (Vietnam)	ALL	PDF	1864 KB
China SITIIAS CCC Ex Certificate	2020322303003533 (Singapore)	ALL	PDF	844 KB
DNV Marine	TAA00001WX	ALL	PDF	106 KB
Europe UL ATEX Category 3 G	UL 22 ATEX 2853X	ALL	PDF	23 KB
UL IECEx Certificate of Conformity	IECEx UL 16.0051X	ALL	LINK	---
USA Canada UL Hazardous Location Certificate of Compliance cULus UL E106378	CoC E106378 RepRef E106378-20160330	ALL	PDF	371 KB
USA FM	FM 22 US 0031X	ALL	PDF	878 KB
Control Drawings
Control drawing FM / Control drawing FM		ALL	PDF	146 KB
Declaration of Conformity
EU Declaration of Conformity (P+F)	TDOC-0058DENG	ENG	PDF	178 KB

相關產品: KFD2-EB2.SP

Matching System Components

	UPR-03 Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 2 m (6 foot), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-M Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 1.6 m (5 foot), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-S Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 0.8 m (2.6 ft), simple to customize to application space, Eliminates daisy-chainspa

	K-DUCT-GY-UPR-03 Profile Rail
	Cable trunking with integrated Power Rail UPR-03, Safe spacious separation of field and control signals, No additional cable guides necessary, Provides DC supply voltage to all equipped K-System modules, Standard length 1.8 m (5.8 ft), simple to customize to application space, With end caps UPR-E, cover and mounting aidspa

	K-DUCT-BU-UPR-03 Profile Rail
	Cable trunking with integrated Power Rail UPR-03, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Provides DC supply voltage to all equipped K-System modules, Standard length 1.8 m (5.8 ft), simple to customize to application space, With end caps UPR-E, cover and mounting aidspa

Accessories

	KF-CTT-5GN Terminal Block with Test Plug Socket
	3-pin spring terminal with push-in connection technology, For KF modules of K-System, Integrated test sockets for connection of HART communicators, Packaging unit: 5 pieces greenpa

	KF-CP Coding Pins
	Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa

General Notes Relating to Pepperl+Fuchs Product Information

快速連結

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

台灣倍加福有限公司
信義路5段150巷2號21樓之4
信義區
11059 台北市臺灣
臺灣
fa-info@tw.pepperl-fuchs.com
phone +886 2 27227708

Pepperl+Fuchs 倍加福是領先全球的電子感測器 和 零組件的開發與製造商. 超過七十年的不斷創新、穩定的品質與持續的業績增長，成就了今日的我們， Pepperl+Fuchs 倍加福在全球擁有 6,300 名員工，並在德國、美國、新加坡、匈牙利、印尼和越南都設有製造工廠，其中多數工廠已通過 ISO 9001 認證