请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
FN-LB-I
General specifications |
Number of protected signal lines | 1 |
Functional safety related parameters |
Safety Integrity Level (SIL) | SIL 3 |
Supply |
Rated voltage | ≤ 48 V |
Rated current | ≤ 250 mA |
Leakage current | ≤ 5 µA |
On-state voltage | ≤ 85 V |
Ground insulation | ≥ 500 V breakdown voltage |
Electrical specifications |
Total discharge current (8/20 µs) | 20 kA |
Conformity |
Degree of protection | IEC 60529:2001 |
Ambient conditions |
Ambient temperature | -30 ... 60 °C (-22 ... 140 °F) For usage in hazardous area observe the EC-type examination certificate. |
Mechanical specifications |
Housing material | Stainless steel 1.4401 (AISI 316) surface all over polished |
Degree of protection | IP67 |
Cable | |
| Length | 0.3 m |
Mass | approx. 200 g |
Dimensions | AF22 x 77 mm (0.9 x 3 inch) |
| Length | 77 mm |
| Width across flats | 22 |
Mounting | NPT1/2 thread |
Data for application in connection with hazardous areas |
EU-type examination certificate | PTB 00 ATEX 2175 |
| Marking | II 2G EEx ia IIC T6 |
| Voltage | 50 V |
Maximum leakage current | 10 kA line to ground (common), 5 kA line to line (differential) in accordance to IEC 60-2 |
Nominal response time | |
| Symmetrical | 1 ns |
| Asymmetric | 100 ns |
Bandwidth | ≥ 40 kHz |
Directive conformity | |
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 |
International approvals |
CSA approval | |
| Control drawing | 116-0187 (cCSAus) |
General information |
Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
Classifications
System | Classcode |
ECLASS 13.0 | 27171202 |
ECLASS 12.0 | 27171202 |
ECLASS 11.0 | 27130805 |
ECLASS 10.0.1 | 27130805 |
ECLASS 9.0 | 27130805 |
ECLASS 8.0 | 27130805 |
ECLASS 5.1 | 27130801 |
ETIM 9.0 | EC000941 |
ETIM 8.0 | EC000941 |
ETIM 7.0 | EC000941 |
ETIM 6.0 | EC000941 |
ETIM 5.0 | EC000941 |
UNSPSC 12.1 | 39121610 |
Details:
FN-LB-I
Product Documentation:
FN-LB-I
Design / Simulation:
FN-LB-I