请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
BP.PDS.M16-M20S.PA.GN.K50
Mechanical specifications |
Degree of protection | IP66 / IP68 |
Material | Polyamide (PA) |
| Finish | inherent color green |
Mass | |
| Individual component | approx. 0.9 g |
| Packing unit | approx. 65 g |
Dimensions | |
| Diameter (D) | 7 mm |
| Outer diameter (DO) | 13.3 mm |
| Length of pin (PL) | 15 mm |
| Total length (L) | 20.7 mm |
Ambient conditions |
Ambient temperature | -60 ... 70 °C (-76 ... 158 °F) |
Impact resistance | 4 J |
Data for application in connection with hazardous areas |
EU-type examination certificate | IMQ 15 ATEX 006X |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db |
International approvals |
IECEx approval | IECEx IMQ 15.0001X |
Conformity |
Degree of protection | EN 60529 |
General information |
Note | For exact reference to types and sizes of cable glands please refer to the specific datasheets |
Delivery quantity | 50 |
Scope of delivery | Sealing Plugs for plastic Cable Glands Brief instructions (1 copy) |
Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
Classifications
System | Classcode |
ECLASS 13.0 | 27140805 |
ECLASS 12.0 | 27140805 |
ECLASS 11.0 | 27144435 |
ECLASS 10.0.1 | 27144435 |
ECLASS 9.0 | 27144435 |
ECLASS 8.0 | 27149112 |
ECLASS 5.1 | 27149112 |
ETIM 9.0 | EC000032 |
ETIM 8.0 | EC000032 |
ETIM 7.0 | EC000032 |
ETIM 6.0 | EC000441 |
ETIM 5.0 | EC000441 |
UNSPSC 12.1 | 31181702 |
Details:
BP.PDS.M16-M20S.PA.GN.K50
Product Documentation:
BP.PDS.M16-M20S.PA.GN.K50
Approvals:
BP.PDS.M16-M20S.PA.GN.K50
相關產品:
BP.PDS.M16-M20S.PA.GN.K50
Matching System Components |
|
|
|
For cables without armor, Thread M16, Thread length 10 mm, Ex eb and Ex tb certified, Blue marking for use with Ex i circuits, High impact-resistant polyamide material, Seal chloroprene, Suitable for operation in Zone 1, Zone 2, Zone 21 and Zone 22, Very large clamping range due to double sealing insert, Full impact resistance of 7 J according to IEC/EN 60079-0 for the full range without limitations, Cable type: non-armored cables, Thread size (TD): M16, Cable gland: high impact-resistant polyamidepa |
|