工業感測器服務資訊
+886 2 27227708
+886-2-27227782
防爆產品服務資訊

Activator BT-F130-A

BT-F130-A
  • Suitable for mounting on valve actuators for use in valve technology

请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。

將完整的規格書下載為PDF:


產品規格摘要:的技術資料  BT-F130-A

產品描述
Actuator for F130 series
Mechanical specifications
Shaft diameter< 27.5 mm
Shaft height20 mm
Material
HousingMounting component: PBT
Spacer diskPP (1 unit, 5.5 mm strong)
Stopper capPBT (1 unit black)
Mounting screwfor activator: 1.4305 / AISI 303 (1 piece M6 x 25)
Mass25 g

Classifications

SystemClasscode
ECLASS 13.027274002
ECLASS 12.027274002
ECLASS 11.027270103
ECLASS 10.0.127270103
ECLASS 9.027270103
ECLASS 8.027270191
ECLASS 5.127270191
ETIM 9.0EC001487
ETIM 8.0EC001487
ETIM 7.0EC001487
ETIM 6.0EC001487
ETIM 5.0EC003015
UNSPSC 12.131251509

Details: BT-F130-A

Design / Simulation: BT-F130-A

Language Selection:
CAD語言檔案類型檔案尺寸
CAD 3-D / CAD 3-DALLSTP491 KB
CAD Portal / CAD PortalALLLINK---

Approvals: BT-F130-A

Language Selection:
Declaration of Conformity證書號碼語言檔案類型檔案尺寸
EU-Declaration of conformityTDOC-7610_ENGENGPDF1309 KB
UK-Declaration of conformityTDOC-7611_ENGENGPDF1284 KB

相關產品: BT-F130-A

Accessory of
Measuring range 0 ... 360°, Analog output 4 mA ... 20 mA, Adjustable switch points, Output polarity: DC, Measuring range: 360°, Type of voltage: DC, Output type: 2 switch outputs PNP, NO , reverse polarity protected , short-circuit protected, Output type: 1 current output: 4 ... 20 mA, UL approval: cULus Listed, General Purpose, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: 5-pin, M12 x 1 connectorfa
Analog output, load-dependent voltage or current, Parameterisable measuring range, Measuring range: max. 360°
min. 45°, Operating voltage: 18 ... 30 V DC, Output type: current output or voltage output (load dependend)
4 ... 20 mA (RL < 400 Ω)
0 ... 10 V (RL > 3.3 kΩ), UL approval: cULus Listed, General Purpose, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: 5-pin, M12 x 1 connectorfa
Analog position indicator with end position monitoring, 2 configurable switching frames, Preset range of angle measurement 0 ... 90°, Extended analog signal range, Measuring range: max. 180°
min. 90°, Operating voltage: 18 ... 30 V DC, Output type: 2 switch outputs PNP, NO , reverse polarity protected , short-circuit protected , programmable, Output type: current output
3.8 ... 20.5 mA (RL < 400 Ω), UL approval: cULus Listed, General Purpose, Class 2 Power Sourcefa
Analog output, load-dependent voltage or current, 2 configurable switching frames, Parameterisable measuring range, Measuring range: max. 360°
min. 45°, Operating voltage: 18 ... 30 V DC, Output type: 2 switch outputs PNP, NO , reverse polarity protected , short-circuit protected , programmable, Output type: current output or voltage output (load dependend)
4 ... 20 mA (RL < 400 Ω)
0 ... 10 V (RL > 3.3 kΩ)fa
3 configurable switching frames, Measuring range: max. 360°
min. 5°, Operating voltage: 18 ... 30 V DC, Output type: 3 switch outputs PNP, NO , reverse polarity protected , short-circuit protected , programmable, UL approval: cULus Listed, General Purpose, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: 5-pin, M12 x 1 connector, Degree of protection: IP67, Housing: PBTfa