Select Your Country

Go to global website

  1. en
  2. Products
  3. Industrial Sensors
  4. 光电传感器
  5. 漫反射型光电传感器
  6. ML100-8-H-350-RT/102/115

ML100-8-H-350-RT/102/115 背景抑制传感器

Key Benefits at a Glance

  • 微型设计
  • 易于使用
  • 光斑极为明亮、清晰
  • 全金属螺纹安装
  • 清晰可见的 LED，用于指示通电和开关状态
  • 对环境光不敏感

Show more

Please contact us for exact delivery estimation.
Preferred Type
Product photo: 背景抑制传感器 ML100-8-H-350-RT/102/115
Dimensions: 背景抑制传感器 ML100-8-H-350-RT/102/115
Product photo: 背景抑制传感器 ML100-8-H-350-RT/102/115
Dimensions: 背景抑制传感器 ML100-8-H-350-RT/102/115
Product Compliance: Europe – CE
Product Compliance: USA - cULus LISTED
Product Compliance: United Kingdom – UKCA
Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

ZH
  • DE
  • EN
  • ES
  • FR
  • JA
  • ZH
Datasheet功能ClassificationProduct DocumentationDesign / Simulation认证Related Products

Technical data of ML100-8-H-350-RT/102/115

带背景抑制的三角测量传感器，350 mm 可调节检测范围，红光，亮时/暗时接通，NPN 输出，固定电缆
检测距离5 ... 350 mm
最小检测范围5 ... 30 mm
最大检测范围5 ... 350 mm
调整范围30 ... 350 mm
参考目标标准白色平板，100 mm x 100 mm
光源LED
光源类型调制可见红光
偏振滤波片无
黑/白差 (6 %/90 %)< 18 % 当 350 mm
光点直径大约 20 mm 相距 350 mm
发散角大约 4 °
光学端面向前直射
环境光限制EN 60947-5-2:2007+A1:2012
MTTFd860 a
任务时间 (TM)20 a
诊断覆盖率 (DC)0 %
工作指示灯绿色 LED：通电
功能指示灯黄色 LED： 检测到物体时亮起
控制元件感应范围调节器
控制元件亮时接通/暗时接通转换开关
工作电压UB10 ... 30 V DC
纹波最大 10 %
空载电流I0< 20 mA
开关类型该传感器的开关类型是可更改的。默认设置为： 亮时接通
信号输出1 路 NPN 输出，短路保护，反极性保护，集电极开路
开关电压最大 30 V DC
开关电流最大 100 mA ， 阻抗负载
电压降Ud≤ 1,5 V DC
开关频率f500 Hz
响应时间1 ms
产品标准EN 60947-5-2
UL 认证cULus 认证的 2 类电源，或具有有限电压输出且带（可以是集成式）保险丝（最大值为 3.3 A，符合 UL248 标准）的认证电源，1 类外壳
CCC 认证额定电压 ≤ 36 V 时，产品不需要 CCC 认证/标记
环境温度-30 ... 60 °C (-22 ... 140 °F)
存储温度-40 ... 70 °C (-40 ... 158 °F)
防护等级IP67
连接2 m 固定电缆
材料
外壳PC（聚碳酸酯）
光学端面PMMA
质量大约 50 g
紧固螺丝的紧固扭矩0,6 Nm
尺寸
高度31 mm
宽度11 mm
深度20 mm
电缆长度2 m
產品目錄

Related News and Applications

Read more on news and applications related to this product.

ML100 Diffuse Mode Sensors Detect Blue Solar Wafers

ML100 Diffuse Mode Sensors Detect Blue Solar Wafers

The reliable detection of solar wafers is one of the most demanding tasks for a photoelectric sensor. Read how the BlueBeam variant from the proven ML100 series ensures reliable recognition of solar wafers …
More information

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Privacy Policy

Deny all cookies