Wireless Access Point (Ex nR) GR.RER*
- Glass-fiber reinforced polyester (GRP) enclosure
- Installation in Zone 2
- Installation in Zone 21 and Zone 22 (on request)
- Use of industrial Wireless Access Points in hazardous areas
- Separate connection enclosure allows for easy installation and maintenance
- Lightweight solution
- Customizable configuration of WI-FI and network devices and cable entries as per specification
- Image and drawing are generic for this device type and may deviate from the specific variant
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Téléchargez ici la fiche technique complète en PDF:
Caractéristiques techniques GR.RER*
| Description produit |
|---|
| Wireless Access Point (Ex nR) in glass-fiber reinforced polyester (GRP) enclosure for use in explosion-hazardous areas Zones 2, 21, 22 |
| Electrical specifications | ||
|---|---|---|
| Operating voltage | 690 V AC / DC max. , depending on size for ATEX / IECEx | |
| Operating current | 350 A max. , depending on size and certification | |
| Mechanical specifications | ||
| Enclosure cover | fully detachable , optional hinges | |
| Cover fixing | stainless steel combination Phillips and slotted screw | |
| Cover seal | foamed silicone | |
| Degree of protection | IP66 | |
| Cable entry | ||
| Number of cable entries | 2 x M20 for standard variants As per specification for engineered solutions |
|
| Material | ||
| Enclosure | carbon loaded, antistatic glass-fiber reinforced polyester (GRP) | |
| Finish | inherent color black | |
| Grounding plate | 2 mm brass optional | |
| Mass | depending on integrated components and selected enclosure size | |
| Shock resistance | IK09 (from GR.18.18.10 and larger, IK09, IK10 apply) | |
| Dimensions | depending on integrated components see datasheets of relevant enclosures values might differ slightly due to casting and manufacturing tolerances |
|
| Mounting | wall mounting | |
| Grounding | none as standard optional M6 or M8 internal/external brass nickel-plated grounding bolt optional M6 or M8 internal/external stainless steel grounding bolt |
|
| Ambient conditions | ||
| Ambient temperature | depending on integrated components | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | FIDI 23 ATEX 0082X | |
| Marking |  II 3G Ex nR IIC T6...T4 GcEx II 3G Ex db nR [ia] IIC T6...T4 Gc Ex II 3G Ex nR [op is] IIC T6...T4 Gc |
|
| International approvals | ||
| IECEx approval | IECEx FIDI 23.0011X | |
| Further approvals | available on request | |
| Conformity | ||
| Degree of protection | EN60529 | |
| CE marking | 0102 | |
| General information | ||
| Ordering information | This Wireless Access Point solution will be delivered completely configured and assembled ready for use. For configuration details please contact customer service. | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| General specifications | ||
| Installed components | All major WI-FI Access Point vendors such as Aruba, Cisco, ect. | |
| Accessories | ||
| Optional accessories | M6 or M8 internal/external brass nickel-plated grounding bolts M6 or M8 internal/external stainless steel grounding bolts grounding plate, brass engraved traffolyte tag label engraved AISI 316L stainless steel tag label color in-fill stainless steel tag label |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27180502 |
| ECLASS 12.0 | 27180502 |
| ECLASS 11.0 | 27180502 |
| ECLASS 10.0.1 | 27180502 |
| ECLASS 9.0 | 27180502 |
| ECLASS 8.0 | 27180508 |
| ECLASS 5.1 | 27180502 |
| ETIM 9.0 | EC002503 |
| ETIM 8.0 | EC002503 |
| ETIM 7.0 | EC002503 |
| ETIM 6.0 | EC002503 |
| ETIM 5.0 | EC002503 |
| UNSPSC 12.1 | 39121314 |
Details: GR.RER*
Approvals: GR.RER*
| Certificates | Identification | Langue | Type de fichier | Taille |
|---|---|---|---|---|
| Europe Fiditas ATEX | FIFI 23 ATEX 0082X | ALL | 4629 KB | |
| Worldwide Fiditas IECEx Certificate of Conformity | IECEx FIDI 23.0011X | ALL | LINK | --- |
Pepperl+Fuchs S.A.
Metropoolstraat 11
2900 Schoten / Anvers
Belgique
TVA BE 0436.097.152, RPM Anvers, dép.Anvers
sales@be.pepperl-fuchs.com
+32 3 644 25 00
Pepperl+Fuchs est leader comme concepteur et fabricant de capteurs et composants électroniques pour le marché mondial de l'automatisation. L'innovation constante, la qualité incontestable et la croissance soutenue, garantissent notre succès, depuis plus de 70 ans. Pepperl+Fuchs emploie 6300 personnes dans le monde et compte des usines en Allemagne, aux USA, à Singapour, en Hongrie, en Indonésie et au Vietnam ; la plupart d'entre elles sont certifiées ISO 9001.