Viator USB HART Interface with PowerXpress HM-PF-USB-PWRX-010031P
- Quickly power and communicate with HART field devices
- Powers all 2-wire HART devices, independent of supplier
- Draws power from USB port, needs no external supply to power modem
- Compact, rugged polycarbonate housing for industrial-grade reliability
- Integrated connector cable terminates in 2 test clips and 1 USB connector cable
- Selectable powered-modem or modem-only mode
- Compatible with 32- and 64-bit Windows® XP, Vista, 7 and 10
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Téléchargez ici la fiche technique complète en PDF:
Caractéristiques techniques HM-PF-USB-PWRX-010031P
| Description produit |
|---|
| Interface for commissioning, calibrating, and acquiring data from HART field devices |
| Supply | ||
|---|---|---|
| Input current | 30 mA at 5 V for modem only , 255 mA at 5 V with device power and modem | |
| Power supply | Powered by USB port , No external power required | |
| Interface | ||
| Interface type | USB 2.0 port or higher | |
| Output | ||
| Signal | 0.5 ± 0.1 Vpp trapezoidal wave at 1200/2200 Hz, 24 VDC at 40 mA to device | |
| Galvanic isolation | ||
| Output/interface | 500 V DC | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 EN 62368-1:2014-08 |
|
| RoHS | ||
| Directive 2011/65/EU (RoHS) | EN IEC 63000:2018 | |
| System requirements | ||
| Operating system | 32- and 64-bit Windows® 7, and Windows® 10 | |
| Ambient conditions | ||
| Operating temperature | -20 ... 50 °C (-4 ... 122 °F) | |
| Storage temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Relative humidity | 0 ... 95 % non-condensing | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | USB (type A) Connector , red and black test clips | |
| Material | Polycarbonate | |
| Dimensions | 96 mm x 47 mm x 24 mm | |
| Height | 24 mm | |
| Width | 47 mm | |
| Length | 96 mm | |
| Cable length | 1.8 m 2-strand wire terminating in 2 test clips , 15.2 cm cable terminating in 1 USB type A connector | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27219090 |
| ECLASS 12.0 | 27219090 |
| ECLASS 11.0 | 27219290 |
| ECLASS 10.0.1 | 27219290 |
| ECLASS 9.0 | 27219290 |
| ECLASS 8.0 | 27219290 |
| ECLASS 5.1 | 27242391 |
| ETIM 9.0 | EC001604 |
| ETIM 8.0 | EC001604 |
| ETIM 7.0 | EC001604 |
| ETIM 6.0 | EC003015 |
| ETIM 5.0 | EC001467 |
| UNSPSC 12.1 | 39121008 |
Details: HM-PF-USB-PWRX-010031P
Product Documentation: HM-PF-USB-PWRX-010031P
| Safety and Security Documentation | Langue | Type de fichier | Taille |
|---|---|---|---|
| Manuel d'instructions | FRA | 149 KB | |
| Manuals | |||
| Viator Check Software User Manual | ENG | 6287 KB | |
| Hardware Manual HM-PF-USB-PWRX-010031P | ENG | 799 KB | |
Approvals: HM-PF-USB-PWRX-010031P
| Certificates | Identification | Langue | Type de fichier | Taille |
|---|---|---|---|---|
| /cert/cert6848.pdf | L2-06-1000-1025 | ALL | 125 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-5151A | ALL | 203 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-5152A | ALL | 186 KB | |
Software: HM-PF-USB-PWRX-010031P
| Device Description Files/Drivers | Parution | Type de fichier | Taille |
|---|---|---|---|
| Viator USB Driver 2.12.36.4 / Viator USB Driver 2.12.36.4 | 18-34544A_USB_DRIVER | ZIP | 2239 KB |
| Software Tools | |||
| Viator Installer 32 bit (v5.0.0) / Viator Installer 32 bit (v5.0.0) | ZIP | 11982 KB | |
| Viator Installer 64 bit (v5.0.0) / Viator Installer 64 bit (v5.0.0) | 118-0219D | ZIP | 11991 KB |
Produits associés : HM-PF-USB-PWRX-010031P
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
Pepperl+Fuchs S.A.
Metropoolstraat 11
2900 Schoten / Anvers
Belgique
TVA BE 0436.097.152, RPM Anvers, dép.Anvers
sales@be.pepperl-fuchs.com
+32 3 644 25 00
Pepperl+Fuchs est leader comme concepteur et fabricant de capteurs et composants électroniques pour le marché mondial de l'automatisation. L'innovation constante, la qualité incontestable et la croissance soutenue, garantissent notre succès, depuis plus de 70 ans. Pepperl+Fuchs emploie 6300 personnes dans le monde et compte des usines en Allemagne, aux USA, à Singapour, en Hongrie, en Indonésie et au Vietnam ; la plupart d'entre elles sont certifiées ISO 9001.