Serviceline Industrial Sensors
Tél.: +32 (0)3-644 25 00
Demandez un expert
Support en ligne pour la protection contre le risque d’explosion
Demandez un expert
Détecteurs industriels

Laser light sensor VLM350-F280-R4-1002

VLM350-F280-R4-1002
  • Comparison of up to 32 height profiles
  • Evaluation frequency 30 Hz
  • Output of X/Z offset
  • Intelligent exposure time control
  • Laser class 1, eyesafe
  • Data Matrix control codes for parameterization

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Téléchargez ici la fiche technique complète en PDF:


Caractéristiques techniques  VLM350-F280-R4-1002

Description produit
Laser light sensor for profile matching; Comparison of up to 32 height profiles; Output of X/Z offset; Resolution: 752 x 480 pixel; Measuring range: X = 40 ... 160 mm, Z = 60 ... 350 mm; Scan rate: 30 s-1; 2 digital outputs; RS-485 interface
General specifications
Measuring rangeX = 40 ... 160 mm ; Z = 60 ... 350 mm
Light sourcelaser diode
Light typered laser + Integrated LED lightning red 650 nm
Laser nominal ratings
NoteVISIBLE LASER RADIATION , DO NOT STARE INTO BEAM
DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS
Laser class1
Wave lengthMeasuring laser: 660 nm
Pulse lengthMeasuring laser: 0.5 ms
Maximum optical power outputMeasuring laser: 15 mW
Laser monitoringThe safety system switches off the laser when the laser current is too high
Scan rate30 s-1
Evaluation frequency30 Hz
ResolutionX>0.44 mm; Z>0.4 mm at 60 mm distanc
X>1.1 mm; Z>1.1 mm at 200 mm distanc
X>1.9 mm; Z>2.5 mm at 350 mm distanc
Functional safety related parameters
MTTFd20 a
Mission Time (TM)10 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green
Diagnostics indicatorLED yellow / red
Function indicatorTrigger: LED yellow ; object detected : LED red / green
Control elements2 push-buttons
Electrical specifications
Operating voltage24 V ± 20 % , PELV
No-load supply currentmax. 250 mA
Power consumptionmax. 6 W , Outputs without load
Interface
Interface typeRS 485 interface
Physical Switchable terminal resistor
Protocolbinary code
Transfer rate38400 ... 230400 Bit/s
Input
Input voltage24 V
Number/TypeExternal triggering + 1 Input
Switching thresholdlow: < 2.5 V, high: > 8 V
Output
Number/Type2 digital outputs
Switching typePNP
Switching voltage24 V
Switching current150 mA each output
Compliance with standards and directives
Standard conformity
Noise immunityEN 61000-6-2:2005
Emitted interferenceEN 61000-6-4:2007/A1:2011
Degree of protectionEN 60529
Shock and impact resistanceEN 60068-2-27:2009
Laser classIEC 60825-1:2007
Approvals and certificates
UL approvalcULus Listed, Type 1 enclosure
CCC approvalCCC approval / marking not required for products rated ≤36 V
ApprovalsCE
Ambient conditions
Operating temperature-20 ... 45 °C (-4 ... 113 °F) ,   (noncondensing; prevent icing on the lens!)
Storage temperature-20 ... 70 °C (-4 ... 158 °F)
Mechanical specifications
Degree of protectionIP67
Connection8-pin, M12 x 1 connector ( supply + RS485 + Inputs/Outputs ) ; can be rotated 90° ; Grounding : Grounding clip for PCV system
Material
HousingPC/ABS
Optical facePlastic pane
Massapprox. 125 g
Tightening torque, fastening screwsmax. 2 Nm
Dimensions
Height85 mm
Width38 mm
Depth55 mm
General information
NoteSecurity Instructions:
- Read the operating instructions before attempting commissioning
- Installation, connection and adjustments should only be undertaken by specialist personnel
- Not a safety component in accordance with the EU Machinery Directive

Classifications

SystemClasscode
ECLASS 13.027270916
ECLASS 12.027270916
ECLASS 11.027270801
ECLASS 10.0.127270801
ECLASS 9.027270801
ECLASS 8.027270801
ECLASS 5.127270801
ETIM 9.0EC001825
ETIM 8.0EC001825
ETIM 7.0EC001825
ETIM 6.0EC001825
ETIM 5.0EC001825
UNSPSC 12.141111613

Details: VLM350-F280-R4-1002

Product Documentation: VLM350-F280-R4-1002

Language Selection:
ManualsLangueType de fichierTaille
ManualENGPDF3926 KB

Design / Simulation: VLM350-F280-R4-1002

Language Selection:
CADLangueType de fichierTaille
CAD 3-D / CAD 3-DALLSTP8066 KB
CAD Portal / CAD PortalALLLINK---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data PortalALLLINK---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZALLEDZ59 KB

Approvals: VLM350-F280-R4-1002

Language Selection:
Declaration of ConformityIdentificationLangueType de fichierTaille
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-3518FALLPDF39 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-6621ALLPDF224 KB

Software: VLM350-F280-R4-1002

Language Selection:
Software ToolsParutionType de fichierTaille
Software Vision Configurator / Software Vision ConfiguratorV6.7.0ZIP65423 KB

Produits associés : VLM350-F280-R4-1002

Accessories

Female cordset single-ended M12 straight A-coded, 8-pin, PUR cable grey, shieldedfa
Mounting bracket fa
Mounting bracket fa
USB to RS 485 interface converter, Extension cable 0.8 m in scope of delivery, Power supply for 95 - 230 V AC, For RS485fa
Interface module with PROFIBUS interface for SmartRunner, Up to 4 sensors can be connected, DIN rail mounting, PROFIBUS interfacefa
Interface module with PROFINET interface for SmartRunner, Up to 4 sensors can be connected, DIN rail mounting, Ethernet interface with PROFINET, Integrated switchfa
Interface module with EtherCAT interface for SmartRunner, Up to 4 read heads can be connected, DIN rail mounting, EtherCAT interface, Integrated switchfa
Interface module with EtherNet/IP interface for SmartRunner, Up to 4 read heads can be connected, DIN rail mounting, EtherNet/IP, Integrated switchfa
Weld slag cover model, Enclosure for SmartRunner, Protection from welding beads, Simple and fast mountingfa
Replacement glass for SmartRunner protective housing, Protection from welding beads, Simple and fast mountingfa
Remarques générales sur les informations produit de Pepperl+Fuchs

Découvrez les détecteurs de profil laser SmartRunner équipés d'une combinaison unique de technologie de détection de profil avec un détecteur de vision 2D à LED intégrées…

Plus d'informations

Pepperl+Fuchs S.A.
Metropoolstraat 11
2900 Schoten / Anvers
Belgique
TVA BE 0436.097.152, RPM Anvers, dép.Anvers
sales@be.pepperl-fuchs.com
phone +32 3 644 25 00

© 2024 Tous droits réservés.

Pepperl+Fuchs est leader comme concepteur et fabricant de capteurs et composants électroniques pour le marché mondial de l'automatisation. L'innovation constante, la qualité incontestable et la croissance soutenue, garantissent notre succès, depuis plus de 70 ans. Pepperl+Fuchs emploie 6300 personnes dans le monde et compte des usines en Allemagne, aux USA, à Singapour, en Hongrie, en Indonésie et au Vietnam ; la plupart d'entre elles sont certifiées ISO 9001.