6100 series vent EPV-6100-MP-*
- Maximum flow rate of 14,000 l/min
- Intrinsically safe when connected to 6100 control unit
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Téléchargez ici la fiche technique complète en PDF:
Caractéristiques techniques EPV-6100-MP-*
| Description produit |
|---|
| 6100 series purge and pressurization enclosure protection vent |
| General specifications | ||
|---|---|---|
| Series | 6100 Series | |
| System | Ex pxb Purge | |
| Hazardous environment | gas | |
| Electrical specifications | ||
| Connection | ||
| Power | Intrinsically safe connection to the 6100 control unit | |
| Signal | 2-wire intrinsically safe pressure switch | |
| Connection | 2-wire | |
| Pneumatic parameters | ||
| Protective gas supply | Clean air or inert gas | |
| Safe pressure | 0.625 mbar [0.25 in wc / 6.4 mm wc) | |
| Enclosure pressure | 0 ... 50 mbar (0 ... 20.1 in wc / 0 ... 510.5 mm wc) | |
| Flow rate for leakage compensation | depends on enclosure seal based on completely sealed enclosure |
|
| Breaking pressure | Approx. 10 mbar (4.0 in wc) Approx. 25 mbar (10.0 in wc) Approx. 30 mbar (12.1 in wc) Approx. 40 mbar (16.1 in wc) Approx. 50 mbar (20.1 in wc) |
|
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 | |
| RoHS | ||
| Directive 2011/65/EU (RoHS) | EN 50581:2012 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -20 ... 80 °C (-4 ... 176 °F) | |
| Relative humidity | 5 ... 95 %, noncondensing | |
| Vibration resistance | 1 g , 3 ... 150 Hz , all axes | |
| Impact resistance | 30g, 11 ms, all axes | |
| Mechanical specifications | ||
| Material | 316L stainless steel (housing) | |
| Installation | -gravity dependent -air outlet, screen side must be facing down |
|
| Mass | 17 kg (37 lb) | |
| Data for application in connection with hazardous areas | ||
| Certificate | CML 19 ATEX 1425X | |
| Marking |  II2G Ex db eb ib [ib Gb][pxb Gb] IIC T4 Gb |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN IEC 60079-0:2018 EN 60079-1:2014 EN 60079-2:2014 EN 60079-7:2015 EN 60079-11:2012 |
|
| International approvals | ||
| IECEx approval | IECEx CML 19.0156X Ex db eb ib [ib Gb][pxb Gb] IIC T4 Gb |
|
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. Supplemental Standards : EN 61010-1:2010 |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27180591 |
| ECLASS 12.0 | 27180591 |
| ECLASS 11.0 | 27180591 |
| ECLASS 10.0.1 | 27291390 |
| ECLASS 9.0 | 27291390 |
| ECLASS 8.0 | 27291390 |
| ECLASS 5.1 | 40050501 |
| ETIM 9.0 | EC000243 |
| ETIM 8.0 | EC000243 |
| ETIM 7.0 | EC000243 |
| ETIM 6.0 | EC000243 |
| ETIM 5.0 | EC000243 |
| UNSPSC 12.1 | 39121303 |
Details: EPV-6100-MP-*
Product Documentation: EPV-6100-MP-*
| Safety and Security Documentation | Langue | Type de fichier | Taille |
|---|---|---|---|
| Manuel d'instructions | FRA | 170 KB | |
| Manuals | |||
| Manual | ENG | 5218 KB | |
Approvals: EPV-6100-MP-*
| Certificates | Identification | Langue | Type de fichier | Taille |
|---|---|---|---|---|
| Brasil Certificate of Compliance | DNV 24.0062 X | ALL | 421 KB | |
| Europe CML ATEX Certificate II 2 G | CML 19ATEX1425X | ALL | 118 KB | |
| IECEx Certificate of Conformity | IECEx CML 19.0156X | ALL | LINK | --- |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F) | DOC-B0D7C | ALL | 113 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-B0F6 | ALL | 160 KB | |
Produits associés : EPV-6100-MP-*
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
Pepperl+Fuchs S.A.
Metropoolstraat 11
2900 Schoten / Anvers
Belgique
TVA BE 0436.097.152, RPM Anvers, dép.Anvers
sales@be.pepperl-fuchs.com
+32 3 644 25 00
Pepperl+Fuchs est leader comme concepteur et fabricant de capteurs et composants électroniques pour le marché mondial de l'automatisation. L'innovation constante, la qualité incontestable et la croissance soutenue, garantissent notre succès, depuis plus de 70 ans. Pepperl+Fuchs emploie 6300 personnes dans le monde et compte des usines en Allemagne, aux USA, à Singapour, en Hongrie, en Indonésie et au Vietnam ; la plupart d'entre elles sont certifiées ISO 9001.