Support Industrielle sensorer
Support Explosion Protection
Radar sensor RMS-D-RC-NA1
- Microwave motion sensor with intelligent functions
- Cross traffic suppression
- Simplest adjustment of the sensing range
- Direction detection
- Programmable by remote control
- Reliable detection of people and vehicles
- "Slow motion" for extremely slow motions
- Version with FCC-frequency
- IC approval
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for RMS-D-RC-NA1
| Produkt beskrivelse |
|---|
| FCC-approved premium radar motion sensor offering additional functions, dynamic version offering direction detection, remote controllable, 2 m x 4.5 m detection range, max. installation height: 4 m, black housing, relay contact output, cable connection |
| General specifications | ||
|---|---|---|
| Sensing range | Wide: 2000 x 4500 mm (DxW) at 2200 mm mounting height and 30° inclination angle narrow: 4500x 2000 mm (DxW) at 2200 mm mounting height and 30° inclination angle |
|
| Function principle | Microwave module | |
| Detection speed | min. 0.1 m/s | |
| Setting angle | Horizontal: -30° ... +30° in 5° increments Vertical: 0° ... 90° in 10° increments |
|
| Operating frequency | 24.075 ... 24.175 GHz K-Band | |
| Operating mode | Radar motion sensor | |
| Transmitter radiated power (EIRP) | < 20 dBm | |
| Functional safety related parameters | ||
| MTTFd | 640 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Function indicator | LED red/green | |
| Control elements | DIP switch for selection of operating modes : direction detection , cross-traffic suppression , Slow-motion , Switching type | |
| Control elements | sensitivity adjustment | |
| Control elements | Adjustment for off delay | |
| Electrical specifications | ||
| Operating voltage | 12 ... 36 V DC , 12 ... 28 V AC | |
| No-load supply current | ≤ 50 mA at 24 V DC | |
| Power consumption | ≤ 1.2 W at 24 V DC ≤ 1.7 W at 36 V DC |
|
| Output | ||
| Switching type | NO/NC | |
| Signal output | Relay, 1 NO contact/NC contact | |
| Switching voltage | max. 48 V AC / 48 V DC | |
| Switching current | max. 0.5 A AC / 1 A DC | |
| Switching power | max. 24 W / 60 VA | |
| De-energized delay | 0.2 ... 5 s adjustable (1 sec factory setting) | |
| Approvals and certificates | ||
| FCC approval | FCC Rules part 15 / This device can be used in the USA. | |
| IC approval | RSS210 Issue 8.0 / This device can be used in Canada. | |
| Approvals | Use in countries within the European Union is not permitted. In other countries, all applicable national regulations must be observed. | |
| Ambient conditions | ||
| Operating temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Relative humidity | max. 90 % non-condensing | |
| Mechanical specifications | ||
| Mounting height | max. 4000 mm | |
| Degree of protection | IP54 | |
| Connection | plug 4-pin , 5 m connecting cable included with delivery | |
| Material | ||
| Housing | PC/ABS black | |
| Mass | 120 g | |
| Dimensions | 123 mm x 65 mm x 57 mm | |
| Height | 65 mm | |
| Width | 123 mm | |
| Depth | 57 mm | |
| Suitable series | ||
| Series | RMS | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27274501 |
| ECLASS 12.0 | 27280890 |
| ECLASS 11.0 | 27280890 |
| ECLASS 10.0.1 | 27280890 |
| ECLASS 9.0 | 27280890 |
| ECLASS 8.0 | 27280890 |
| ECLASS 5.1 | 27270990 |
| ETIM 9.0 | EC004807 |
| ETIM 8.0 | EC000138 |
| ETIM 7.0 | EC000138 |
| ETIM 6.0 | EC000138 |
| ETIM 5.0 | EC000138 |
| UNSPSC 12.1 | 39121528 |
Details: RMS-D-RC-NA1
Design / Simulation: RMS-D-RC-NA1
| CAD | Sprog | Fil type | Fil størrelse |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 3730 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Tilhørende produkter: RMS-D-RC-NA1
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
+45 7010 4210
© 2024 Alle rettigheder forbeholdt.
Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.