Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for
TOPSCAN2-1-L1200-BK-NA
| Produkt beskrivelse |
| Single or multi-beam light curtain for individual protection |
| General specifications |
| Detection range min. | 0 ... 1500 mm by background evaluation,
500 ... 1500 mm by background suppression |
| Detection range max. | 0 ... 2500 mm with background evaluation,
500 ... 2500 mm with background suppression |
| Light source | IRED |
| Black-white difference (6 %/90 %) | < 20 % at 2000 mm sensor range |
| Marking | CE |
| Number of beams | 1 (number of built-in sensor modules AIR) |
| Operating mode | switching between background suppression/evaluation |
| Diameter of the light spot | 75 x 75 mm by sensing range 2000 mm |
| Indicators/operating means |
| Function indicator | LED red |
| Control elements | Sensing range adjuster, light-on/dark-on changeover switch, changeover switch for mode of operation Background suppression / Background evaluation ; Adjuster for edge monitoring left/right |
| Factory setting | Background suppression |
| Electrical specifications |
| Operating voltage | 17 ... 30 V DC , 18 ... 28 V AC |
| No-load supply current | < 100 mA |
| Input |
| Test input | emitter deactivation with U = 17 ... 30 V DC only in background evaluation mode of operation and DC operation |
| Output |
| Switching type | Light-on/dark-on changeover switch |
| Signal output | Relay, 1 alternator |
| Switching voltage | max. 24 V DC , 48 V AC |
| Switching current | ≤ 1 A |
| Switching power | 24 W / 55 VA |
| Response time | 30 ms , 2 s after test |
| Compliance with standards and directives |
| Standard conformity | |
| Standards | EN 61000-6-2, EN 61000-6-3 |
| Approvals and certificates |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| UN/ECE Regulation No. 10 (E1) | Type-approval number: 047349 |
| Ambient conditions |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Mechanical specifications |
| Mounting height | max. 2500 |
| Degree of protection | IP52 |
| Connection | screw terminals |
| Material | |
| Housing | black aluminum / ABS |
| Optical face | PC |
| Mass | approx. 500 g |
| Dimensions | |
| Height | 42 mm |
| Depth | 37 mm |
| Length | 1200 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270913 |
| ECLASS 12.0 | 27270913 |
| ECLASS 11.0 | 27270913 |
| ECLASS 10.0.1 | 27270913 |
| ECLASS 9.0 | 27270913 |
| ECLASS 8.0 | 27270913 |
| ECLASS 5.1 | 27270903 |
| ETIM 9.0 | EC002550 |
| ETIM 8.0 | EC002550 |
| ETIM 7.0 | EC002550 |
| ETIM 6.0 | EC002550 |
| ETIM 5.0 | EC001821 |
| UNSPSC 12.1 | 39121528 |
Details:
TOPSCAN2-1-L1200-BK-NA
Approvals:
TOPSCAN2-1-L1200-BK-NA
Tilhørende produkter:
TOPSCAN2-1-L1200-BK-NA
| Accessories |
|
|
|
| Pedestal for the sensor module AIR16fa |
|
|
|
|
| Flexible metal conduit, Protection against contamination and damagefa |
|
|
|
|
| Connecting cable for sensor modules, Length 300 mmfa |
|
|
|
|
| End cover for series TopScan-S aluminum profile sectionfa |
|
|
|
|
| Aluminum profile for TopScan-S Series, Length 1400 mmfa |
|
|
|
|
| Polyurethane foam seal for increased degree of protection to IP54, Simple insertion into the TopScan-S profile section behind the capfa |
|
|
|
|
| Profile cover for aluminum profile for TopScan2 Series, Length 1400 mmfa |
|
|
|
|
| Weather protection cover for sensing strips, Protection from adverse effects of weather such as rain, snow, etc., Can be cut to the required lengths, Retrofitting possible with already installed sensing stripsfa |
|
+45 7010 4210