Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Produkt beskrivelse |
---|
Standard radar motion sensor with basic functionality, detection range 4 m x 2 m, max. installation height 4 m, black housing, solid-state relay, cable connection |
General specifications | ||
---|---|---|
Sensing range | 4000 x 2000 mm (DxW) at 2200 mm mounting height and 30° inclination angle | |
Function principle | Microwave module | |
Detection speed | min. 0.05 m/s | |
Setting angle | ||
Rotation angle | -40 ... 40 ° in 5 ° increments | |
Inclination angle | 0 ... 90 ° in 5 ° increments | |
Operating frequency | 24.075 ... 24.175 GHz K-Band | |
Operating mode | Radar motion sensor | |
Transmitter radiated power (EIRP) | < 20 dBm | |
Functional safety related parameters | ||
MTTFd | 696 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Indicators/operating means | ||
Function indicator | detection : LED green push button indication : LED yellow / green |
|
Control elements | Push button for selection of operating modes : sensitivity , direction detection , cross-traffic suppression , slow-motion mode , relay switching type , hold time , immunity | |
Electrical specifications | ||
Operating voltage | 12 ... 24 V DC ± 10 % | |
No-load supply current | ≤ 55 mA at 24 V DC | |
Power consumption | ≤ 1.32 W | |
Output | ||
Switching type | Normally open/closed (NO/NC) | |
Signal output | solid-state relay | |
Switching voltage | max. 28 V AC / 36 V DC | |
Switching current | max. 0.1 A AC / 0.1 A DC | |
Hold time | 1.5 s / 3 s | |
Approvals and certificates | ||
FCC approval | FCC ID: VECAP97 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. |
|
IC approval | IC ID: 10506A-AP97 This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. |
|
Ambient conditions | ||
Operating temperature | -20 ... 55 °C (-4 ... 131 °F) | |
Storage temperature | -30 ... 70 °C (-22 ... 158 °F) | |
Relative humidity | max. 90 % non-condensing | |
Mechanical specifications | ||
Mounting height | max. 4 m | |
Degree of protection | IP54 | |
Connection | Connecting cable 2.5 m included with delivery | |
Material | ||
Housing | PC (Polycarbonate) | |
Mass | approx. 70 g | |
Dimensions | 75 mm x 64 mm x 50 mm | |
Height | 64 mm | |
Width | 75 mm | |
Depth | 50 mm |
System | Classcode |
---|---|
ECLASS 13.0 | 27274501 |
ECLASS 12.0 | 27280890 |
ECLASS 11.0 | 27280890 |
ECLASS 10.0.1 | 27280890 |
ECLASS 9.0 | 27280890 |
ECLASS 8.0 | 27280890 |
ECLASS 5.1 | 27270990 |
ETIM 9.0 | EC004807 |
ETIM 8.0 | EC000138 |
ETIM 7.0 | EC000138 |
ETIM 6.0 | EC000138 |
ETIM 5.0 | EC000138 |
UNSPSC 12.1 | 39121528 |
Brief Instructions | Sprog | Fil type | Fil størrelse |
---|---|---|---|
Brief instructions | ENG | 1390 KB | |
Brief instructions | ENG | 1390 KB |
CAD | Sprog | Fil type | Fil størrelse |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 7181 KB |
Accessories | ||||||
---|---|---|---|---|---|---|
|
||||||
|
||||||
|