Support Industrielle sensorer
Support Explosion Protection
Radar sensor RaDec-D-NA
- Microwave motion sensor with intelligent functions
- Reliable detection of people and vehicles
- Simplest adjustement of the sensing range
- Wall and ceiling mountable
- Version with direction detection and cross-traffic suppression
- Version with FCC-frequency
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for RaDec-D-NA
| Produkt beskrivelse |
|---|
| FCC-approved standard radar motion sensor offering additional functions, dynamic version offering direction detection, 2 m x 4.5 m detection range, max. installation height: 4 m, black housing, relay contact output, cable connection |
| General specifications | ||
|---|---|---|
| Sensing range | Wide: 2000 x 4500 mm (DxW) at 2200 mm mounting height and 30° inclination angle narrow: 4500x 2000 mm (DxW) at 2200 mm mounting height and 30° inclination angle |
|
| Function principle | Microwave module | |
| Detection speed | min. 0.1 m/s | |
| Setting angle | 0 ... 90 ° in 5 ° increments | |
| Operating frequency | 24.075 ... 24.175 GHz K-Band | |
| Operating mode | Radar motion sensor | |
| Transmitter radiated power (EIRP) | < 20 dBm | |
| Functional safety related parameters | ||
| MTTFd | 300 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Function indicator | LED red | |
| Control elements | potentiometer , DIP switch for selection of operating modes | |
| Control elements | sensitivity adjustment | |
| Electrical specifications | ||
| Operating voltage | 12 ... 36 V DC , 12 ... 28 V AC | |
| No-load supply current | ≤ 50 mA at 24 V DC | |
| Power consumption | ≤ 1.7 W | |
| Output | ||
| Switching type | NO/NC | |
| Signal output | Relay, 1 NO contact/NC contact | |
| Switching voltage | max. 48 V AC / 48 V DC | |
| Switching current | max. 0.5 A AC / 1 A DC | |
| Switching power | max. 24 W / 60 VA | |
| De-energized delay | 1 s | |
| Approvals and certificates | ||
| FCC approval | FCC Rules part 15 / This device can be used in the USA. | |
| IC approval | RSS210 Issue 8.0 / This device can be used in Canada. | |
| Approvals | Use in countries within the European Union is not permitted. In other countries, all applicable national regulations must be observed. | |
| Ambient conditions | ||
| Operating temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Relative humidity | max. 90 % non-condensing | |
| Mechanical specifications | ||
| Mounting height | max. 4000 mm | |
| Degree of protection | IP54 | |
| Connection | Connecting cable 2.5 m included with delivery | |
| Material | ||
| Housing | PC/ABS black | |
| Mass | 130 g | |
| Dimensions | 101 mm x 60 mm x 59 mm | |
| Height | 60 mm | |
| Width | 101 mm | |
| Depth | 59 mm | |
| Suitable series | ||
| Series | RaDec | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27274501 |
| ECLASS 12.0 | 27280890 |
| ECLASS 11.0 | 27280890 |
| ECLASS 10.0.1 | 27280890 |
| ECLASS 9.0 | 27280890 |
| ECLASS 8.0 | 27280890 |
| ECLASS 5.1 | 27270990 |
| ETIM 9.0 | EC004807 |
| ETIM 8.0 | EC000138 |
| ETIM 7.0 | EC000138 |
| ETIM 6.0 | EC000138 |
| ETIM 5.0 | EC000138 |
| UNSPSC 12.1 | 39121528 |
Details: RaDec-D-NA
Informative Literature: RaDec-D-NA
| We are sorry, there are no documents for your language selection. Please select another language. |
Product Documentation: RaDec-D-NA
| Brief Instructions | Sprog | Fil type | Fil størrelse |
|---|---|---|---|
| Brief Instructions - RaDec-D | ENG | 335 KB |
Design / Simulation: RaDec-D-NA
| CAD | Sprog | Fil type | Fil størrelse |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 785 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Tilhørende produkter: RaDec-D-NA
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
+45 7010 4210
© 2024 Alle rettigheder forbeholdt.
Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.