Support Industrielle sensorer
Support Explosion Protection
Combined sensor MotionScan-P
- Combined sensor for securing escape and emergency routes
- Radar opening impulse
- Closing edge safety mechanism with diffuse sensor
- Safety mechanism in accordance with EN 16005
- Extra-large, adjustable protection field in front of the door
- Door learn function
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for MotionScan-P
| Produkt beskrivelse |
|---|
| Combination sensor for opening and protection |
| General specifications | ||
|---|---|---|
| Detection field | AIR, adjustable , total field: 2400 mm x 1000 mm (WxD) for a mounting height of 2200 mm | |
| Detection field | Radar sensor 2500 mm x 4000 mm (d x w) at installation height of 2200 mm and 45° angle | |
| Detection range max. | 0 ... 3200 mm | |
| Light source | 3 Series | |
| Light type | modulated infrared light | |
| Marking | CE | |
| Setting angle | -8 ... 4 ° | |
| Operating frequency | 24.15 ... 24.25 GHz K-Band , Radar sensor | |
| Transmitter radiated power (EIRP) | < 20 dBm | |
| Functional safety related parameters | ||
| Performance level (PL) | PL d | |
| Category | Cat. 2 | |
| MTTFd | 339.83 a | |
| Diagnostic Coverage (DC) | 81.52 % | |
| Indicators/operating means | ||
| Function indicator | LED green/blue/red/orange | |
| Control elements | DIP switch | |
| Control elements | sensitivity adjustment | |
| Parameterization indicator | LED flashes when in adjustment mode Fast orange | |
| Electrical specifications | ||
| Operating voltage | 12 ... 24 V DC / 12 ... 24 V AC +/- 10%, 50 - 60 Hz | |
| No-load supply current | ≤ 80 mA at 24 V DC ≤ 150 mA at 12 V: | |
| Power consumption | 2.5 VA | |
| Input | ||
| Activation current | at 24 V DC 6 mA | |
| Test input | active with +UB | |
| Output 1 | ||
| Output type | Infrared, optocoupler | |
| Switching voltage | 48 V DC | |
| Switching current | 7.5 mA resistive load | |
| De-energized delay | 0.5 s | |
| Switching type | light/dark on selectable programmable | |
| Response time | 100 ms up to 200 ms | |
| Output 2 | ||
| Output type | Radar | |
| Signal output | Frequency output | |
| Output frequency | 100 Hz duty 1:1 | |
| Switching voltage | 48 V DC | |
| Switching current | 50 mA resistive load | |
| De-energized delay | 1.5 s | |
| Response time | 100 ms up to 200 ms | |
| Conformity | ||
| Functional safety | ISO 13849-1 | |
| Product standard | EN 12978 | |
| Approvals and certificates | ||
| CE conformity | 2014/53/EU This device can be used in all countries within the European Union. In other countries, all applicable national regulations must be observed. | |
| FCC approval | No - Use in North America is not permitted. | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Operating temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Relative humidity | max. 80 % | |
| Mechanical specifications | ||
| Mounting height | max. 3200 mm | |
| Degree of protection | IP54 (when mounted) | |
| Connection | plug 8-pin , Connecting cable included with delivery | |
| Material | ||
| Housing | ABS | |
| Mass | approx. 260 g | |
| Dimensions | (W x H x D) 265 mm 60 mm 43 mm | |
| Height | 60 mm | |
| Width | 265 mm | |
| Depth | 43 mm | |
| Note | Please refer to the package insert for information on how to mount and install the sensor correctly. | |
| General information | ||
| Scope of delivery | sensor , cable , 2 screws , Mounting aid , Instruction leaflet | |
| Suitable series | ||
| Series | MotionScan | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27274501 |
| ECLASS 12.0 | 27280890 |
| ECLASS 11.0 | 27280890 |
| ECLASS 10.0.1 | 27280890 |
| ECLASS 9.0 | 27280890 |
| ECLASS 8.0 | 27280890 |
| ECLASS 5.1 | 27270990 |
| ETIM 9.0 | EC004807 |
| ETIM 8.0 | EC000138 |
| ETIM 7.0 | EC000138 |
| ETIM 6.0 | EC000138 |
| ETIM 5.0 | EC000138 |
| UNSPSC 12.1 | 39121528 |
Details: MotionScan-P
Tilhørende produkter: MotionScan-P
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
+45 7010 4210
© 2024 Alle rettigheder forbeholdt.
Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.