Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for
ML6-54-G/25/95/136
Produkt beskrivelse |
Retroreflective sensor for standard applications, miniature design, clear object detection, 6 m detection range, red light, light/dark on, 2 push-pull outputs, M8 plug |
General specifications |
Effective detection range | 0 ... 3.5 m in TEACH mode 0 ... 5 m at switch position "N" |
Reflector distance | 0 ... 3.5 m in TEACH mode 0 ... 5 m at switch position "N" |
Threshold detection range | 6 m |
Reference target | H85-2 reflector |
Light source | LED |
Light type | modulated visible red light , 660 nm |
Polarization filter | yes |
Angle deviation | max. ± 1° |
Diameter of the light spot | approx. 40 mm at detection range 1 m |
Opening angle | 1.7 ° |
Ambient light limit | |
| Continuous light | 40000 Lux |
| Modulated light | 5000 Lux |
Functional safety related parameters |
MTTFd | 980 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Indicators/operating means |
Operation indicator | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) |
Function indicator | LED yellow: switching state ; Operating reserve ; Teach-In |
Control elements | 5-step switch for setting the contrast detection levels.
|
Contrast detection levels | switch position I: 10 % - clean, water filled PET bottles switch position II: 18 % - clear glass bottles switch position III: 40 % - coloured glass or opaque materials adjustable due to Teach-In switch |
Electrical specifications |
Operating voltage | 10 ... 30 V DC |
Ripple | max. 10 % |
No-load supply current | < 15 mA at 24 V DC |
Output |
Switching type | light/dark on, programmable |
Signal output | 2 push-pull (4 in 1) outputs, complementary, short-circuit proof, reverse polarity protected |
Switching voltage | max. 30 V DC |
Switching current | max. 100 mA |
Voltage drop | ≤ 2.5 V DC |
Switching frequency | 1 kHz |
Response time | 500 µs |
Conformity |
Product standard | EN 60947-5-2 |
Compliance with standards and directives |
Standard conformity | |
| Shock and impact resistance | IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions |
| Vibration resistance | IEC / EN 60068-2-6. Sinus. 10 -2000 Hz, 10 g in each X, Y and Z directions |
Approvals and certificates |
UL approval | cULus Listed |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Storage temperature | -20 ... 75 °C (-4 ... 167 °F) |
Mechanical specifications |
Degree of protection | IP67 / IP69K |
Connection | M8 x 1 connector, 4-pin |
Material | |
| Housing | ABS |
| Optical face | PMMA |
Mass | approx. 10 g |
Dimensions | |
| Height | 31.4 mm |
| Width | 13.9 mm |
| Depth | 18 mm |
Classifications
System | Classcode |
ECLASS 13.0 | 27270902 |
ECLASS 12.0 | 27270902 |
ECLASS 11.0 | 27270902 |
ECLASS 10.0.1 | 27270902 |
ECLASS 9.0 | 27270902 |
ECLASS 8.0 | 27270902 |
ECLASS 5.1 | 27270902 |
ETIM 9.0 | EC002717 |
ETIM 8.0 | EC002717 |
ETIM 7.0 | EC002717 |
ETIM 6.0 | EC002717 |
ETIM 5.0 | EC002717 |
UNSPSC 12.1 | 39121528 |
Details:
ML6-54-G/25/95/136
Product Documentation:
ML6-54-G/25/95/136
Design / Simulation:
ML6-54-G/25/95/136
Approvals:
ML6-54-G/25/95/136
Tilhørende produkter:
ML6-54-G/25/95/136
Accessories |
|
|
|
Female cordset single-ended M8 straight A-coded, 4-pin, PVC cable greyfa |
|
|
|
|
Female cordset single-ended M8 angled A-coded, 4-pin, PVC cable greyfa |
|
|
|
|
Mounting Clampfa |
|
|
|
|
Mounting bracket fa |
|
|
|
|
Mounting bracket fa |
|
|
|
|
Mounting bracket fa |
|
|
|
|
Reflector, rectangular 84.5 mm x 84.5 mm, mounting holesfa |
|
|
|
|
Reflector, round ø 84 mm, central mounting holefa |
|
|
|
|
Reflector with mounting holesfa |
|
|
|
|
Reflector, rectangular 60 mm x 19 mm, mounting holesfa |
|
|
|
|
Reflective tape 100 mm x 100 mmfa |
|
|
|
|
Reflector, round ø 20.5 mm, self-adhesivefa |
|
|
|
|
Reflector, round ø 25 mm, self-adhesivefa |
|
|
|
|
Reflector with Micro-structure, rectangular 23 mm x 13.8 mm, diagonal mounting holefa |
|
|
|
|
Reflector, round ø 50 mm, snap-in, high temperature applicationsfa |
|
|
|
|
Reflector, rectangular 47.9 mm x 47.25 mm, mounting holes, fixing strapfa |
|