Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for
NSB10-30GM50-2E2-V1-M1-S2D2
General specifications |
Switching function | 2 x normally open (NO) |
Output type | PNP |
Rated operating distance | 10 mm |
Installation | flush |
Output polarity | DC |
Assured operating distance | 0 ... 8.1 mm |
Actuating element | Reference target according EN IEC 60947-5-2 (FE360 - ST37K) 30 mm x 30 mm x 1 mm |
Reduction factor rAl | 0.5 |
Reduction factor rCu | 0.4 |
Reduction factor r304 | 0.8 |
Reduction factor rBrass | 0.5 |
Output type | 4-wire |
Nominal ratings |
Operating voltage | 10 ... 30 V |
Rated operating voltage | 12 ... 24 V |
Switching frequency | 0 ... 30 Hz |
Hysteresis | typ. 5% |
Reverse polarity protection | reverse polarity protected |
Short-circuit protection | pulsing |
Overload resistance | yes |
Voltage drop | ≤ 3 V at IL (sum of all outputs) max. 50 mA |
Rated insulation voltage | 30 V |
Operating current | 1 ... 30 mA per output |
Off-state current | 0 ... 0.5 mA |
No-load supply current | ≤ 15 mA |
Time delay before availability | ≤ 300 ms |
Switching state indicator | LED, yellow |
Error indicator | LED, red |
Functional safety related parameters |
Safety Integrity Level (SIL) | SIL 2 |
Performance level (PL) | PL d |
Category | Cat. 2 |
MTTFd | > 7500 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | min. 60 % |
Assured release distance of a PDDB | 15 mm |
Compliance with standards and directives |
Standard conformity | |
| Standards | EN IEC 60947-5-2:2007 EN IEC 60947-5-3:2013 EN ISO 13849-1:2015 EN IEC 61508:2010 EN IEC 62061:2021 compatible with EN ISO 61131-2:2007 Typ 1, 2, 3 |
Approvals and certificates |
UL approval | cULus Listed, General Purpose, Class 2 Power Source |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
E1 Type approval | 10R-06 |
Ambient conditions |
Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Altitude | ≤ 2000 m above MSL |
Mechanical specifications |
Connection type | Connector plug M12 x 1 , 4-pin |
Housing material | brass, nickel-plated |
Sensing face | PBT |
Degree of protection | IP68 / IP69 |
Mass | 108 g |
Dimensions | |
| Length | 70 mm |
| Diameter | 30 mm |
General information |
Scope of delivery | 2 self locking nuts in scope of delivery |
Classifications
System | Classcode |
ECLASS 13.0 | 27274101 |
ECLASS 12.0 | 27274101 |
ECLASS 11.0 | 27272401 |
ECLASS 10.0.1 | 27272401 |
ECLASS 9.0 | 27272401 |
ECLASS 8.0 | 27272401 |
ECLASS 5.1 | 27272401 |
ETIM 9.0 | EC002714 |
ETIM 8.0 | EC002714 |
ETIM 7.0 | EC002714 |
ETIM 6.0 | EC002714 |
ETIM 5.0 | EC002714 |
UNSPSC 12.1 | 39121550 |
Details:
NSB10-30GM50-2E2-V1-M1-S2D2
Product Documentation:
NSB10-30GM50-2E2-V1-M1-S2D2
Design / Simulation:
NSB10-30GM50-2E2-V1-M1-S2D2
Approvals:
NSB10-30GM50-2E2-V1-M1-S2D2
Tilhørende produkter:
NSB10-30GM50-2E2-V1-M1-S2D2
Accessories |
|
|
|
Mounting flange, 30 mmfa |
|
|
|
|
Cordset M12 socket yellow straight to M12 plug yellow straight A-coded, 4-pin, PUR cable weld spatter resistant black, UL approved, drag chain suitable, torsion resistantfa |
|
|
|
|
Cordset M12 socket yellow angled to M12 plug yellow straight A-coded, 4-pin, PUR cable weld spatter resistant black, UL approved, drag chain suitable, torsion resistantfa |
|