Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for
NRN30-30GS50-E2-IO
| General specifications |
| Switching function | Normally open/closed (NO/NC) programmable |
| Output type | PNP |
| Rated operating distance | 30 mm (factory setting) |
| Near operating distance | 20 mm (can be activated by software) |
| Installation | non-flush |
| Output polarity | DC |
| Assured operating distance | 0 ... 24.3 mm |
| Reduction factor rAl | 1 |
| Reduction factor rCu | 1 |
| Reduction factor r304 | 1 |
| Reduction factor rSt37 | 1 |
| Output type | 3-wire |
| Nominal ratings |
| Operating voltage | 10 ... 30 V DC |
| Switching frequency | 0 ... 680 Hz (switch point mode)
0 ... 50 Hz (window mode, switch point mode with stability alarm) |
| Hysteresis | typ. 3 % |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Voltage drop | ≤ 0.5 V |
| Operating current | 0 ... 200 mA |
| Off-state current | 0 ... 0.5 mA typ. 60 µA at 25 °C |
| No-load supply current | ≤ 15 mA |
| Time delay before availability | max. 150 ms |
| Constant magnetic field | 200 mT |
| Alternating magnetic field | 200 mT |
| Status indicator | LED yellow |
| Functional safety related parameters |
| MTTFd | 360 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Interface |
| Interface type | IO-Link ( via C/Q ) |
| IO-Link revision | 1.1 |
| Device ID | 0x201106 (2101510) |
| Transfer rate | COM2 (38.4 kBit/s) |
| Min. cycle time | 2.3 ms |
| Process data width | Process data input (control system side): 2 Bit
Process data output (control system side): none |
| SIO mode support | yes |
| Compatible master port type | A |
| Compliance with standards and directives |
| Standard conformity | |
| Standards | EN IEC 60947-5-2 |
| Approvals and certificates |
| Protection class | II |
| Rated insulation voltage | 60 V |
| Rated impulse withstand voltage | 800 V |
| UL approval | cULus Listed, General Purpose
Class 2 power source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Mechanical specifications |
| Connection type | cable PVC , 2 m |
| Core cross section | 0.34 mm2 |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Sensing face | PBT |
| Degree of protection | IP67 |
| Cable | |
| Cable diameter | 4.3 mm ± 0.1 mm |
| Bending radius | > 15 x cable diameter |
| Mass | 170 g |
| Dimensions | |
| Length | 50 mm |
| Diameter | 30 mm |
| Factory settings |
| Default setting | operating mode = switch point mode with stability alarm
switching function = Normally open (NO)
switching distance = 30 mm |
| General information |
| Scope of delivery | 2 self locking nuts in scope of delivery |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27274001 |
| ECLASS 12.0 | 27274001 |
| ECLASS 11.0 | 27270101 |
| ECLASS 10.0.1 | 27270101 |
| ECLASS 9.0 | 27270101 |
| ECLASS 8.0 | 27270101 |
| ECLASS 5.1 | 27270101 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Details:
NRN30-30GS50-E2-IO
Product Documentation:
NRN30-30GS50-E2-IO
Design / Simulation:
NRN30-30GS50-E2-IO
Approvals:
NRN30-30GS50-E2-IO
Software:
NRN30-30GS50-E2-IO
Tilhørende produkter:
NRN30-30GS50-E2-IO
| Accessories |
|
|
|
| Mounting flange, 30 mmfa |
|
|
|
|
| EtherNet/IP IO-Link master with 8 inputs/outputsfa |
|
|
|
|
|
| PROFINET IO IO-Link master with 8 inputs/outputsfa |
|
|
|
|
| EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa |
|
|
|
|
| PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, push-in terminalsfa |
|
|
|
|
|
| PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa |
|
|
|
|
| IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa |
|
|
|
|
| Ethernet IO-Link module with 8 inputs/outputsfa |
|
|
|
|
| Ethernet IO-Link module with 8 inputs/outputsfa |
|
|
|
|
|
| EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, push-in connectorsfa |
|
+45 7010 4210