Capacitive sensor CCB10-30GS55-N1

10 mm flush
The switching distance can be set over a wide range with the potentiometer

NAMUR sensors must be operated with approved switch amplifiers. Please find suitable devices below:

Go to our Switch Amplifiers

Technical Data
Product Documentation
Design / Simulation
Approvals
Tilhørende produkter
FAQ/Knowledge Base

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:

Uddrag af datablad: Tekniske data for CCB10-30GS55-N1

General specifications
Switching function		Normally open (NO)
Output type		NAMUR
Rated operating distance		10 mm
Installation		flush
Output type		2-wire
Nominal ratings
Installation conditions
	A	0 mm
	B	0 mm
	C	20 mm
	F	60 mm
Nominal voltage		8.2 V (R_i approx. 1 kΩ)
Operating voltage		5 ... 15 V
Switching frequency		0 ... 50 Hz
Reverse polarity protection		reverse polarity protected
Current consumption
	Measuring plate not detected	≤ 1.5 mA
	Measuring plate detected	≥ 2.5 mA
Switching state indicator		LED, yellow
Functional safety related parameters
MTTF_d		1134 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	NAMUR	EN 60947-5-6:2000 IEC 60947-5-6:1999
	Standards	EN IEC 60947-5-2
Approvals and certificates
ATEX approval
	Equipment protection level Ga	BVS 13 ATEX E 074 X
	Equipment protection level Da	BVS 13 ATEX E 074 X
ETL approval		cETLus
Ambient conditions
Ambient temperature		-20 ... 70 °C (-4 ... 158 °F)
Mechanical specifications
Connection type		cable PUR , 2 m
Core cross section		0.75 mm²
Housing material		Stainless steel 1.4305 / AISI 303
Sensing face		PTFE
Degree of protection		IP67
Dimensions
	Length	80 mm
	Diameter	30 mm
General information
Use in the hazardous area		see instruction manuals

Classifications

System	Classcode
ECLASS 13.0	27274201
ECLASS 12.0	27274201
ECLASS 11.0	27270102
ECLASS 10.0.1	27270102
ECLASS 9.0	27270102
ECLASS 8.0	27270102
ECLASS 5.1	27270102
ETIM 9.0	EC002715
ETIM 8.0	EC002715
ETIM 7.0	EC002715
ETIM 6.0	EC002715
ETIM 5.0	EC002715
UNSPSC 12.1	39121550

Details: CCB10-30GS55-N1

Product Documentation: CCB10-30GS55-N1

Safety and Security Documentation	Sprog	Fil type	Fil størrelse
Instruktions manual	DAN	PDF	167 KB

Design / Simulation: CCB10-30GS55-N1

CAD	Sprog	Fil type	Fil størrelse
CAD 3-D / CAD 3-D	ALL	STP	69 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
EPLAN macro EDZ / EPLAN Makro EDZ	ALL	EDZ	59 KB

Approvals: CCB10-30GS55-N1

Certificates	Certifikat nr.	Sprog	Fil type	Fil størrelse
Canada USA Ordinary Location	cETLus	ALL	LINK	---
EU DEKRA EXAM ATEX ia 1G ATEX ia 1D	BVS 13 ATEX E 074 X	ALL	PDF	585 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0353B	ALL	PDF	1220 KB

Tilhørende produkter: CCB10-30GS55-N1

Accessories

	BF 30 Mounting flange
	Mounting flange, 30 mmfa

Generelle bemærkninger vedr. produktoplysninger fra Pepperl+Fuchs

Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
phone +45 7010 4210

Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.