Read head WCS3B-LS116D

RS-485 interface
Non-contact, absolute position encoder
Automatic detection of dirt accumulation
Integrated display module

Technical Data
Product Documentation
Design / Simulation
Approvals
Tilhørende produkter

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:

Uddrag af datablad: Tekniske data for WCS3B-LS116D

Produkt beskrivelse
Reading head, RS-485 interface, without RS-485 terminal resistor

General specifications
Passage speed		≤ 12.5 m/s
Measuring length		max. 314.5 m
Free tolerances to code rail		horizontal: 31 mm ( ± 15.5 mm ) vertical: 28 mm ( ± 14 mm )
Resolution		± 0.4 mm (1,250 positions/m)
Functional safety related parameters
MTTF_d		204 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green: power on
Data flow indicator		LED yellow: data communication active
Error indicator		LED red flashing: read head outside of code rail solid on: internal diagnostic test failed
Display		Display module, 6-digit adaptable to installation position
Electrical specifications
Operating voltage		10 ... 30 V DC
Power consumption		2 VA
Interface
Interface type		RS 485 interface
Data output code		binary code
Protocol		3
Transfer rate		187.5 kBit/s
Address		0
Termination		without RS 485 termination
Output
Output velocity		no
Standard conformity
Emitted interference		DIN EN 61000-6-4 , DIN EN 12015
Noise immunity		DIN EN 61000-6-2 , DIN EN 12016
Shock resistance		DIN EN 60068-2-27, half sine 30 g, 18 ms
Vibration resistance		DIN EN 60068-2-6, sine, 5 g, 10 - 2000 Hz, 10 cycles
Approvals and certificates
CSA approval		cCSAus Certified, General Purpose Class 2 power source
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Operating temperature		0 ... 60 °C (32 ... 140 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		90 % , noncondensing
Mechanical specifications
Connection type		5-pin, M12 x 1 connector
Degree of protection		IP54
Material
	Housing	ABS , PC (Polycarbonate)
Mass		500 g
General information
Ordering information		Mounting plate included with delivery

Classifications

System	Classcode
ECLASS 13.0	27270918
ECLASS 12.0	27270918
ECLASS 11.0	27270701
ECLASS 10.0.1	27270701
ECLASS 9.0	27270701
ECLASS 8.0	27270701
ECLASS 5.1	27270701
ETIM 9.0	EC001852
ETIM 8.0	EC001852
ETIM 7.0	EC001852
ETIM 6.0	EC001852
ETIM 5.0	EC001852
UNSPSC 12.1	41111945

Details: WCS3B-LS116D

Product Documentation: WCS3B-LS116D

Manuals	Sprog	Fil type	Fil størrelse
Manual WCS Electrical	ENG	PDF	11790 KB
Manual WCS Mechanical	ENG	PDF	12338 KB

Design / Simulation: WCS3B-LS116D

CAD	Sprog	Fil type	Fil størrelse
CAD 3-D / CAD 3-D	ALL	STP	2923 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: WCS3B-LS116D

Certificates	Certifikat nr.	Sprog	Fil type	Fil størrelse
Canada USA CSA Ordinary Location	1007121	ALL	PDF	198 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0909F	ALL	PDF	87 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-6636A	ALL	PDF	84 KB

Tilhørende produkter: WCS3B-LS116D

Matching System Components

	WCS3-CS70-L-S***-L**** WCS3 code rail
	Code rail, polyester laminate, Flexible installation by means of alu profile- or mounting bracket system, High chemical resistance, Low weightfa

	WCS3-CS70-M1-S****-L**** WCS3 code rail
	Code rail, stainless steel, Flexible installation by means of alu profile- or mounting bracket system, High mechanical stability, Suitable for applications with wide temperature variationsfa

	WCS3-ID70-M1 ID Pad
	ID pad, stainless steel, Flexible installation by means of mounting bracket system, High mechanical stability, High temperature resistance, Code rail cutout for identification and fine positioning, Extensive number range 1 ... 1260fa

	WCS3-ID70-L1 ID Pad
	ID pad, polyester laminate, Flexible installation by means of mounting bracket system, High chemical resistance, Low weight, Code rail cutout for identification and fine positioning, Extensive number range 1 ... 1260fa

Accessories

	WCS3B-PL2 Protective case
	Transparent protective case and seal for WCS3B readerfa

	WCS-MP1 WCS accessories
	Mounting plate for reading heads WCS2 and WCS3, Universal mounting plate for all reading heads WCS2... and WCS3...fa

	CBL-PUR-GY-3x2x025-100M Bulk Raw Cable
	Cable, PUR/PP, 6-core grey, twisted pairs, overall shield, UL approved, drag chain suitablefa

	CBL-PVC-GY-3x2x014-100M Bulk Raw Cable
	Cable, PVC/PVC, 6-core grey, twisted pairs, overall shieldfa

	V15-G-ABG-PG9-FE Field attachable female cordset with earth clamp
	Female connector, M12, 5-pin, shielded, field attachablefa

	V15-G-2M-PUR-ABG Cable socket, shielded
	Female cordset single-ended M12 straight A-coded, 5-pin, PUR cable grey, shieldedfa

	V15-G-2M-PUR-ABG-V15-G Connection cable, shielded
	Cordset M12 socket straight to M12 plug straight A-coded, 5-pin, PUR cable grey, shieldedfa

Generelle bemærkninger vedr. produktoplysninger fra Pepperl+Fuchs

Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
phone +45 7010 4210

Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.