Support Industrielle sensorer
Support Explosion Protection
Industrielle sensorer

Read head WCS3B-LS221EHS-OM

WCS3B-LS221EHS-OM
  • RS-485 interface
  • Non-contact, absolute position encoder
  • Automatic detection of dirt accumulation
  • Speed transfer
  • Extended temperature range
  • Measuring length max. 629 m

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:


Uddrag af datablad: Tekniske data for   WCS3B-LS221EHS-OM

Produkt beskrivelse
Read head, RS-485 interface, with RS-485 terminal resistor
General specifications
Passage speed≤ 12.5 m/s
Measuring lengthmax. 629 m
Free tolerances to code railhorizontal: 28 mm ( ± 14 mm )
vertical: 25.5 mm ( +11.5 mm/-14 mm )
Resolution± 0.4 mm (1,250 positions/m)
Functional safety related parameters
MTTFd44 a
Mission Time (TM)10 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Data flow indicator1 LED yellow
flashing: data communication active
Velocity indicator2 LED yellow
on: if the speed limit is not exceeded
off, if speed limit is exceeded
Error indicator3 Dual LED
green on: code rail detected, normal function
green flashing: invalid position
red on: internal diagnostic test failed
red flashing: read head outside of code rail
Electrical specifications
Operating voltage10 ... 30 V DC
Power consumption11 VA at 24 V DC
Interface
Interface typeRS 485 interface
Data output codebinary code
Protocol2 , extended to 629 m
Transfer rate62.5 kBit/s
Address0
Terminationwith RS 485 termination
Query cycle time≥ 5 ms
Output
Output velocityswitching output
Output type1 switch output PNP, NO , short-circuit protected
Switching voltageOperating voltage
Switching current150 mA
Standard conformity
Emitted interferenceDIN EN 61000-6-4 , DIN EN 12015
Noise immunityDIN EN 61000-6-2 , DIN EN 12016
Shock resistanceDIN EN 60068-2-27, half sine 30 g, 18 ms
Vibration resistanceDIN EN 60068-2-6, sine, 5 g, 10 - 2000 Hz, 10 cycles
Approvals and certificates
CSA approvalcCSAus Certified, General Purpose
Class 2 power source
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Operating temperature-40 ... 60 °C (-40 ... 140 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type5-pin, M12 x 1 connector
Degree of protectionIP67 / IP69
Material
HousingPET , PC (Polycarbonate)
Mass1000 g
NoteThe reader must not be operated without the protective housing!

Classifications

SystemClasscode
ECLASS 13.027270918
ECLASS 12.027270918
ECLASS 11.027270701
ECLASS 10.0.127270701
ECLASS 9.027270701
ECLASS 8.027270701
ECLASS 5.127270701
ETIM 9.0EC001852
ETIM 8.0EC001852
ETIM 7.0EC001852
ETIM 6.0EC001852
ETIM 5.0EC001852
UNSPSC 12.141111945

Details: WCS3B-LS221EHS-OM

Informative Literature: WCS3B-LS221EHS-OM

Language Selection:
LiteratureSprogFil typeFil størrelse
Application Report - Position Encoding System (WCS) Tackles Positioning Tasks in Container TerminalsENGPDF226 KB
Application Report - Position Encoding System (WCS) for Absolute Positioning in Galvanic PlantsENGPDF240 KB

Product Documentation: WCS3B-LS221EHS-OM

Language Selection:
ManualsSprogFil typeFil størrelse
Manual WCS ElectricalENGPDF11790 KB
Manual WCS MechanicalENGPDF12338 KB

Approvals: WCS3B-LS221EHS-OM

Language Selection:
CertificatesCertifikat nr.SprogFil typeFil størrelse
Canada USA CSA Ordinary Location1007121ALLPDF198 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-0909FALLPDF87 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-6636AALLPDF84 KB

Tilhørende produkter: WCS3B-LS221EHS-OM

Matching System Components
Code rail, polyester laminate, Flexible installation by means of alu profile- or mounting bracket system, High chemical resistance, Low weightfa
Code rail, stainless steel, Flexible installation by means of alu profile- or mounting bracket system, High mechanical stability, Suitable for applications with wide temperature variationsfa
ID pad, stainless steel, Flexible installation by means of mounting bracket system, High mechanical stability, High temperature resistance, Code rail cutout for identification and fine positioning, Extensive number range 1 ... 1260fa
ID pad, polyester laminate, Flexible installation by means of mounting bracket system, High chemical resistance, Low weight, Code rail cutout for identification and fine positioning, Extensive number range 1 ... 1260fa
Accessories
Transparent protective case and seal for WCS3B readerfa
Mounting plate for reading heads WCS2 and WCS3, Universal mounting plate for all reading heads WCS2... and WCS3...fa
Cable, PUR/PP, 6-core grey, twisted pairs, overall shield, UL approved, drag chain suitablefa
Cable, PVC/PVC, 6-core grey, twisted pairs, overall shieldfa
Female connector, M12, 5-pin, shielded, field attachablefa
Female cordset single-ended M12 straight A-coded, 5-pin, PUR cable grey, shieldedfa
Cordset M12 socket straight to M12 plug straight A-coded, 5-pin, PUR cable grey, shieldedfa
Generelle bemærkninger vedr. produktoplysninger fra Pepperl+Fuchs

Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
phone +45 7010 4210

© 2024 Alle rettigheder forbeholdt.

Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.