Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for
WCS-IS311
| Produkt beskrivelse |
| WCS SSI interface module |
| General specifications |
| Installation | DIN rail mounting |
| Electrical specifications |
| Operating voltage | 24 V DC ± 20 % |
| Power consumption | ≤ 2 W (without read heads) |
| Interface 1 |
| Connection of | control system |
| Interface type | SSI |
| Transfer rate | max. 500 kHz |
| Data output format | Gray code |
| Bus termination resistor | integrated |
| Interface 2 |
| Connection of | Read head |
| Connectable read heads | WCS-LS211 |
| Interface type | RS-485 |
| Transmission method | half duplex |
| Transfer rate | max. 187.5 kBit/s |
| RS485 termination resistor | integrated |
| Refresh cycle of read head | 1 ms |
| Standard conformity |
| Emitted interference | EN 55011 |
| Noise immunity | DIN EN 50082-2 |
| Ambient conditions |
| Operating temperature | 0 ... 55 °C (32 ... 131 °F) |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Relative humidity | ≤ 80 % |
| Mechanical specifications |
| Connection type | removable terminal block |
| Degree of protection | IP20 |
| Material | plastic |
| Installation position | any position |
| Mass | approx. 350 g |
| Dimensions | |
| Height | 74 mm |
| Width | 100 mm |
| Depth | 121 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270991 |
| ECLASS 12.0 | 27270991 |
| ECLASS 11.0 | 27270791 |
| ECLASS 10.0.1 | 27270791 |
| ECLASS 9.0 | 27270791 |
| ECLASS 8.0 | 27270791 |
| ECLASS 5.1 | 27270791 |
| ETIM 9.0 | EC001852 |
| ETIM 8.0 | EC001852 |
| ETIM 7.0 | EC001852 |
| ETIM 6.0 | EC001852 |
| ETIM 5.0 | EC001852 |
| UNSPSC 12.1 | 41111945 |
Details:
WCS-IS311
Product Documentation:
WCS-IS311
+45 7010 4210