Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for
OBT80-R3-E2-0,2M-V3-P-L
| Produkt beskrivelse |
| Laser triangulation sensor with background suppression, ultra-small design with M3 mounting, 80 mm sensing range, light on, PNP output, 200 mm fixed cable with plug M8, 3-pin |
| General specifications |
| Detection range | 20 ... 80 mm |
| Reference target | standard black, 100 mm x 100 mm |
| Light source | laser diode |
| Light type | modulated visible red light , 680 nm |
| Laser nominal ratings | |
| Note | LASER LIGHT , DO NOT STARE INTO BEAM |
| Laser class | 1 |
| Wave length | 680 nm |
| Beam divergence | > 5 mrad |
| Pulse length | approx. 3 µs |
| Repetition rate | approx. 16.6 kHz |
| max. pulse energy | 9.5 nJ |
| Black-white difference (6 %/90 %) | < 15 % at 80 mm |
| Diameter of the light spot | approx. 2 mm at a distance of 80 mm |
| Opening angle | approx. 2 ° |
| Optical face | frontal |
| Ambient light limit | EN 60947-5-2 : 30000 Lux |
| Functional safety related parameters |
| MTTFd | 800 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Operation indicator | LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz) |
| Function indicator | LED yellow: lights when object is detected |
| Electrical specifications |
| Operating voltage | 12 ... 24 V |
| No-load supply current | < 10 mA |
| Protection class | III |
| Output |
| Switching type | NO contact / light-on |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
| Switching voltage | max. 30 V DC |
| Switching current | max. 50 mA |
| Voltage drop | ≤ 1.5 V DC |
| Switching frequency | approx. 2 kHz |
| Response time | 250 µs |
| Conformity |
| Product standard | EN 60947-5-2 |
| Laser safety | EN 60825-1:2007 |
| Approvals and certificates |
| UL approval | E87056 , cULus Recognized, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| FDA approval | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Ambient conditions |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | 200 mm fixed cable with 3-pin, M8 x 1 connector |
| Material | |
| Housing | PC/ABS and TPU |
| Optical face | PC |
| Cable | PUR |
| Mass | approx. 10 g |
| Dimensions | |
| Height | 26 mm |
| Width | 7.5 mm |
| Depth | 13.8 mm |
| Cable length | 200 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270903 |
| ECLASS 12.0 | 27270903 |
| ECLASS 11.0 | 27270903 |
| ECLASS 10.0.1 | 27270903 |
| ECLASS 9.0 | 27270903 |
| ECLASS 8.0 | 27270903 |
| ECLASS 5.1 | 27270903 |
| ETIM 9.0 | EC001821 |
| ETIM 8.0 | EC001821 |
| ETIM 7.0 | EC001821 |
| ETIM 6.0 | EC001821 |
| ETIM 5.0 | EC002719 |
| UNSPSC 12.1 | 39121528 |
Details:
OBT80-R3-E2-0,2M-V3-P-L
Design / Simulation:
OBT80-R3-E2-0,2M-V3-P-L
Approvals:
OBT80-R3-E2-0,2M-V3-P-L
Tilhørende produkter:
OBT80-R3-E2-0,2M-V3-P-L
| Accessories |
|
|
|
| Female cordset single-ended M8 angled A-coded, 3-pin, PUR cable greyfa |
|
|
|
|
| Mounting aid for sensors from the R3 series, mounting bracketfa |
|
|
|
|
| Mounting aid for sensors from the R3 series, mounting bracketfa |
|
|
|
|
| Mounting aid for sensors from the R3 series, mounting bracketfa |
|
|
|
|
| Mounting aid for sensors from the R3 series, mounting bracketfa |
|
+45 7010 4210