Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for
OBT80-R3-P1-0,2M-V3-P-L
Produkt beskrivelse |
Laser triangulation sensor with background suppression, ultra-small design with M3 mounting, 80 mm sensing range, push-pull output, 200 mm fixed cable with plug M8, 3-pin |
General specifications |
Detection range | 20 ... 80 mm |
Reference target | standard black, 100 mm x 100 mm |
Light source | laser diode |
Light type | modulated visible red light , 680 nm |
Laser nominal ratings | |
| Note | LASER LIGHT , DO NOT STARE INTO BEAM |
| Laser class | 1 |
| Wave length | 680 nm |
| Beam divergence | > 5 mrad |
| Pulse length | approx. 3 µs |
| Repetition rate | approx. 16.6 kHz |
| max. pulse energy | 9.5 nJ |
Black-white difference (6 %/90 %) | < 15 % at 80 mm |
Diameter of the light spot | approx. 2 mm at a distance of 80 mm |
Opening angle | approx. 2 ° |
Optical face | frontal |
Ambient light limit | EN 60947-5-2 : 30000 Lux |
Functional safety related parameters |
MTTFd | 800 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Indicators/operating means |
Operation indicator | LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz) |
Function indicator | LED yellow: lights when object is detected |
Electrical specifications |
Operating voltage | 12 ... 24 V |
No-load supply current | < 10 mA |
Protection class | III |
Output |
Switching type | The default setting is: PNP normally open / light on ; NPN normally-closed/dark-on |
Signal output | Push-pull output, short-circuit protected, reverse polarity protected |
Switching voltage | max. 30 V DC |
Switching current | max. 50 mA |
Voltage drop | ≤ 1.5 V DC |
Switching frequency | approx. 2 kHz |
Response time | 250 µs |
Conformity |
Product standard | EN 60947-5-2 |
Laser safety | EN 60825-1:2007 |
Approvals and certificates |
UL approval | E87056 , cULus Recognized, Class 2 Power Source |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
FDA approval | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
Ambient conditions |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Storage temperature | -30 ... 70 °C (-22 ... 158 °F) |
Mechanical specifications |
Degree of protection | IP67 |
Connection | 200 mm fixed cable with 3-pin, M8 x 1 connector |
Material | |
| Housing | PC/ABS and TPU |
| Optical face | PC |
| Cable | PUR |
Mass | approx. 10 g |
Dimensions | |
| Height | 26 mm |
| Width | 7.5 mm |
| Depth | 13.8 mm |
Cable length | 200 mm |
Classifications
System | Classcode |
ECLASS 13.0 | 27270903 |
ECLASS 12.0 | 27270903 |
ECLASS 11.0 | 27270903 |
ECLASS 10.0.1 | 27270903 |
ECLASS 9.0 | 27270903 |
ECLASS 8.0 | 27270903 |
ECLASS 5.1 | 27270903 |
ETIM 9.0 | EC001821 |
ETIM 8.0 | EC001821 |
ETIM 7.0 | EC001821 |
ETIM 6.0 | EC001821 |
ETIM 5.0 | EC002719 |
UNSPSC 12.1 | 39121528 |
Details:
OBT80-R3-P1-0,2M-V3-P-L
Design / Simulation:
OBT80-R3-P1-0,2M-V3-P-L
Approvals:
OBT80-R3-P1-0,2M-V3-P-L
Tilhørende produkter:
OBT80-R3-P1-0,2M-V3-P-L
Accessories |
|
|
|
Female cordset single-ended M8 angled A-coded, 3-pin, PUR cable greyfa |
|
|
|
|
Mounting aid for sensors from the R3 series, mounting bracketfa |
|
|
|
|
Mounting aid for sensors from the R3 series, mounting bracketfa |
|
|
|
|
Mounting aid for sensors from the R3 series, mounting bracketfa |
|
|
|
|
Mounting aid for sensors from the R3 series, mounting bracketfa |
|