Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for
AL2109-P-1820-3449/25/32/143
| Produkt beskrivelse |
| High-resolution light grid for detecting people and objects, set comprising emitter and receiver, field height: 1800 mm, light on, PNP output, M8 plug |
| General specifications |
| Effective detection range | 0 ... 3500 mm |
| Threshold detection range | 3500 mm |
| Light source | IRED |
| Light type | modulated infrared light , 950 nm |
| Field height | 1800 mm |
| Beam crossover | automatic, 3x/5x/7x (depending on distance between transmitter/receiver) |
| Beam blanking | Defective beams are faded out after 60 s. Deactivation of the light grid upon failure of 2 adjacent beams or more than 50 % of all beams |
| Beam spacing | 90 mm |
| Number of beams | 61 ... 135 (dynamic) |
| Opening angle | Emitter: < 20 ° , Receiver: < 6 ° |
| Ambient light limit | > 100000 Lux |
| Accessories provided | 2 connecting cable , length 5 m (15 ft) |
| Functional safety related parameters |
| MTTFd | 180 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Function indicator | LED red (in receiver): Illuminates after connecting operating power, out when object is detected, flashes in case of permanent interruption of 2 neighbouring beams |
| Electrical specifications |
| Operating voltage | 11 ... 30 V DC |
| Ripple | 10 % |
| No-load supply current | < 180 mA |
| Output |
| Switching type | light-on |
| Signal output | PNP short-circuit protected |
| Switching voltage | max. 30 V DC |
| Switching current | 100 mA |
| Switching frequency | < 3 Hz |
| Response time | < 100 ms |
| Compliance with standards and directives |
| Directive conformity | |
| EMC Directive 2004/108/EC | EN 12015:2014 EN 12016:2013 |
| Standard conformity | |
| Product standard | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2 Edition 3.1:2012-09 |
| Standards | EN 81-70:2003-05 EN 81-70/A1:2004-12 EN 81-1+A3:2009-12; Chapter 7.5.2.1.1.3 Taking into account object detection in accordance with the datasheet specification for the monitoring field. |
| Approvals and certificates |
| CE conformity | yes |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature | -20 ... 65 °C (-4 ... 149 °F) |
| Mechanical specifications |
| Profile width | 9 mm |
| Degree of protection | IP54 |
| Connection | M8 x 1 connector, 4-pin |
| Material | |
| Housing | Aluminum |
| Optical face | plastic |
| Mass | 2000 g (device) |
| Dimensions | |
| Width | 9 mm |
| Depth | 34 mm |
| Length | 2000 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270910 |
| ECLASS 12.0 | 27270910 |
| ECLASS 11.0 | 27270910 |
| ECLASS 10.0.1 | 27270910 |
| ECLASS 9.0 | 27270910 |
| ECLASS 8.0 | 27270910 |
| ECLASS 5.1 | 27270910 |
| ETIM 9.0 | EC002549 |
| ETIM 8.0 | EC002549 |
| ETIM 7.0 | EC002549 |
| ETIM 6.0 | EC002549 |
| ETIM 5.0 | EC002549 |
| UNSPSC 12.1 | 39121528 |
Details:
AL2109-P-1820-3449/25/32/143
Product Documentation:
AL2109-P-1820-3449/25/32/143
Design / Simulation:
AL2109-P-1820-3449/25/32/143
Approvals:
AL2109-P-1820-3449/25/32/143
Tilhørende produkter:
AL2109-P-1820-3449/25/32/143
| Accessories |
|
|
|
| Mounting set for backboard mounting of the elevator light curtains AL2109, Variety of possible uses in the areas of doors and elevators, Simple and fast mountingfa |
|
|
|
|
| Mounting set for mechanical extension of the elevator light curtains AL2109, Variety of possible uses in the areas of doors and elevators, Simple and fast mounting, Material: Aluminum housingfa |
|
|
|
|
| Mounting set for lateral mounting of the elevator light curtains AL2109, Variety of possible uses in the areas of doors and elevators, Simple and fast mountingfa |
|
+45 7010 4210