Fotoelektriske sensorer

Ikke tilgængelig for indkøb

Safety light grid SLP8-2-A-L

Sensing range 8 m
Self-monitoring (type 4 according to IEC/EN 61496-1)
2-radial design
Beam spacing 500 mm
Red transmission light
Integrated function display
Operating reserve indication
Operation on control units of SB4 (SafeBox)

Technical Data
Design / Simulation
Approvals
Software
Tilhørende produkter

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:

Uddrag af datablad: Tekniske data for SLP8-2-A-L

Produkt beskrivelse
Safety light grid, active column

System components
Transceiver		SLP8-2-A
Mirror pillar		SLP8-2-M
General specifications
Effective detection range		0.2 ... 8 m
Light source		LED
Light type		modulated visible red light
Tests		IEC/EN 61496
Safety type according to IEC/EN 61496		4
Marking		CE
Target size		static: 32 mm dynamic: 50 mm (at v = 1.6 m/s of the obstacle)
Beam spacing		500 mm
Number of beams		2
Opening angle		< 5 °
Functional safety related parameters
Performance level (PL)		PL e
Category		Cat. 4
Mission Time (T_M)		20 a
PFH_d		2.81 E-9
Type		4
Indicators/operating means
Operation indicator		LED red in transceiver
Function indicator		LED red: per receiver channel off: Interruption flashes: receiver continuously on: reception with sufficient stability control
Muting indicator		Indicator lamp
Stability alarm indicator		Functional display flashing
Electrical specifications
Operating voltage		Power supply via control unit
Protection class		III , IEC 61140
Conformity
Functional safety		ISO 13849-1
Product standard		EN 61496-1 ; IEC 61496-2
Approvals and certificates
CE conformity		CE
Approvals		TÜV SÜD
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-20 ... 70 °C (-4 ... 158 °F)
Relative humidity		max. 95 %, not condensing
Mechanical specifications
Degree of protection		IP65
Connection		M16 cable gland , terminal compartment
Connection options		Further electrical connection options on request: Connector DIN 43 651 Hirschmann, emitter: 6-pin+PE, receiver: 11-pin+PE
Material
	Housing	extruded aluminum profile, RAL 1021 (yellow) coated
	Optical face	Plastic pane
Mass		Per 2100 g

Classifications

System	Classcode
ECLASS 13.0	27272703
ECLASS 12.0	27272703
ECLASS 11.0	27272703
ECLASS 10.0.1	27272703
ECLASS 9.0	27272703
ECLASS 8.0	27272703
ECLASS 5.1	27272703
ETIM 9.0	EC002549
ETIM 8.0	EC002549
ETIM 7.0	EC002549
ETIM 6.0	EC002549
ETIM 5.0	EC002549
UNSPSC 12.1	46171620

Details: SLP8-2-A-L

Design / Simulation: SLP8-2-A-L

CAD	Sprog	Fil type	Fil størrelse
CAD 3-D / CAD 3-D	ALL	STP	214 KB
CAD 3-D additional / CAD 3-D additional	ALL	STP	207 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: SLP8-2-A-L

Certificates	Certifikat nr.	Sprog	Fil type	Fil størrelse
/cert/cert4281a.pdf	UL-CA-L215245-21-10607002-2 / UL-US-L215245-11-10607002-3	ALL	PDF	570 KB

Software: SLP8-2-A-L

Software Tools	Udgivelses info	Fil type	Fil størrelse
SISTEMA Library Sensors / SISTEMA-Bibliothek Sensoren		ZIP	131 KB

Tilhørende produkter: SLP8-2-A-L

Matching System Components

	SB4-OR-4XP Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, 4 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Stability alarm indication, Clearly visible LED functional display, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL efa

	SB4-OR-4XP-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-B-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-B-B-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-B-B-B-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-B-B-B-B-B-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-4M Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, 4 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Sequential and parallel muting in various operating modes, Double muting, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL efa

	SB4-OR-4XP-4X Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, 8 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Stability alarm indication, Clearly visible LED functional display, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL efa

Accessories

	SLP-X-M Mounting aid Safety
	Deflecting mirror for multi-sided protection safety layouts using SLP series safety light grids, Housing: Extruded aluminum profile , powder coated , RAL 1021 (yellow)fa

	PG SLP-X Mounting aid Safety
	Glass panel to protect the light outlet surface of safety light grids and curtains, Material: mineral glass lensfa

Generelle bemærkninger vedr. produktoplysninger fra Pepperl+Fuchs

Functional Safety Hub from Pepperl+Fuchs

Visit the Functional Safety Hub

Several hundred products with a SIL/PL assessment, free tools, and brochures in one place: the "Functional Safety Hub" is your starting point when you have to implement safety functions.

Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
phone +45 7010 4210

Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.