Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for
OBE10M-R3-SE2-P-L
| Produkt beskrivelse |
| Laser thru-beam sensor, ultra-small design with M3 mounting, 10 m detection range, dark on, PNP output, 2 m fixed cable |
| System components |
| Emitter | OBE10M-R3-S-P-L |
| Receiver | OBE10M-R3-E2-P-L |
| General specifications |
| Effective detection range | 0 ... 10 m |
| Threshold detection range | 15 m |
| Light source | laser diode |
| Light type | modulated visible red light , 680 nm |
| Laser nominal ratings | |
| Note | LASER LIGHT , DO NOT STARE INTO BEAM |
| Laser class | 1 |
| Wave length | 680 nm |
| Beam divergence | > 5 mrad |
| Pulse length | approx. 3 µs |
| Repetition rate | approx. 16.6 kHz |
| max. pulse energy | 9.5 nJ |
| Diameter of the light spot | approx. 20 mm at a distance of 10 m |
| Opening angle | approx. 0.5 ° |
| Optical face | frontal |
| Ambient light limit | EN 60947-5-2 : 30000 Lux |
| Functional safety related parameters |
| MTTFd | 806 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Operation indicator | LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz) |
| Function indicator | Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted |
| Electrical specifications |
| Operating voltage | 12 ... 24 V |
| No-load supply current | Emitter: ≤ 10 mA
Receiver: ≤ 8 mA |
| Protection class | III |
| Input |
| Test input | Test of switching function at 0 V |
| Switching threshold | Teach-In input |
| Output |
| Switching type | NO contact / dark on |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
| Switching voltage | max. 30 V DC |
| Switching current | max. 50 mA , resistive load |
| Voltage drop | ≤ 1.5 V DC |
| Switching frequency | approx. 2 kHz |
| Response time | 250 µs |
| Conformity |
| Product standard | EN 60947-5-2 |
| Laser safety | EN 60825-1:2007 |
| Approvals and certificates |
| UL approval | E87056 , cULus Recognized, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| FDA approval | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Ambient conditions |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | 2 m fixed cable |
| Material | |
| Housing | PC/ABS and TPU |
| Optical face | PC |
| Cable | PUR |
| Mass | approx. 20 g per sensor |
| Dimensions | |
| Height | 26 mm |
| Width | 7.5 mm |
| Depth | 13.8 mm |
| Cable length | 2 m |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270901 |
| ECLASS 12.0 | 27270901 |
| ECLASS 11.0 | 27270901 |
| ECLASS 10.0.1 | 27270901 |
| ECLASS 9.0 | 27270901 |
| ECLASS 8.0 | 27270901 |
| ECLASS 5.1 | 27270901 |
| ETIM 9.0 | EC002716 |
| ETIM 8.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 5.0 | EC002716 |
| UNSPSC 12.1 | 39121528 |
Details:
OBE10M-R3-SE2-P-L
Design / Simulation:
OBE10M-R3-SE2-P-L
Approvals:
OBE10M-R3-SE2-P-L
Tilhørende produkter:
OBE10M-R3-SE2-P-L
| Accessories |
|
|
|
| Mounting aid for sensors from the R3 series, mounting bracketfa |
|
|
|
|
| Mounting aid for sensors from the R3 series, mounting bracketfa |
|
|
|
|
| Mounting aid for sensors from the R3 series, mounting bracketfa |
|
|
|
|
| Mounting aid for sensors from the R3 series, mounting bracketfa |
|
+45 7010 4210