Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for
GA18-S/GK18-S/59/115/161
| Produkt beskrivelse |
| Thru-beam sensor, M18 threaded housing design, plastic housing, side optical face, 12 m detection range, red light, dark on, AC/DC version, NPN-FET output, fixed cable |
| System components |
| Emitter | GA18-S/115 |
| Receiver | GK18-S/59/115/161 |
| General specifications |
| Effective detection range | 0 ... 12 m |
| Threshold detection range | 17.5 m |
| Light source | LED |
| Light type | modulated visible red light , 640 nm |
| Diameter of the light spot | approx. 650 mm at 17.5 m |
| Opening angle | approx. 2 ° |
| Optical face | lateral |
| Ambient light limit | 30000 Lux |
| Accessories provided | Mounting aids |
| Indicators/operating means |
| Operation indicator | LED green, statically lit Power on |
| Function indicator | Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted |
| Electrical specifications |
| Operating voltage | 20 ... 250 V AC/DC |
| No-load supply current | < 2.5 mA per device |
| Output |
| Switching type | dark-on |
| Signal output | N-channel MOSFET, short circuit protected |
| Switching voltage | max. 250 V AC/DC |
| Switching current | max. 200 mA |
| Voltage drop | ≤ 3.5 V AC/DC |
| Switching frequency | 50 Hz |
| Response time | ≤ 10 ms |
| Conformity |
| Product standard | EN 60947-5-2 |
| Compliance with standards and directives |
| Standard conformity | |
| Standards | UL 508 |
| Approvals and certificates |
| Protection class | II, rated insulation voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 |
| UL approval | cULus Listed, Type 1 enclosure
For overcurrent protection, install a fuse with a rated current of max. 3 A 250 V AC/DC |
| CCC approval | Certified by China Compulsory Certification (CCC) |
| Ambient conditions |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | 2 m fixed cable |
| Material | |
| Housing | ABS / PBT |
| Optical face | PMMA |
| Mass | approx. 80 g per device |
| Dimensions | |
| Length | 69 mm |
| Diameter | 18 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270901 |
| ECLASS 12.0 | 27270901 |
| ECLASS 11.0 | 27270901 |
| ECLASS 10.0.1 | 27270901 |
| ECLASS 9.0 | 27270901 |
| ECLASS 8.0 | 27270901 |
| ECLASS 5.1 | 27270901 |
| ETIM 9.0 | EC002716 |
| ETIM 8.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 5.0 | EC002716 |
| UNSPSC 12.1 | 39121528 |
Details:
GA18-S/GK18-S/59/115/161
Product Documentation:
GA18-S/GK18-S/59/115/161
Design / Simulation:
GA18-S/GK18-S/59/115/161
Approvals:
GA18-S/GK18-S/59/115/161
Tilhørende produkter:
GA18-S/GK18-S/59/115/161
| Accessories |
|
|
|
| Mounting flange, 18 mm, Retainer for all cylindrical sensors with M18 thread, Simple installation and exact setting, Large sensing range (max. 20 mm)fa |
|
|
|
|
| Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mmfa |
|
|
|
|
| Mounting Bracket with swivel nutfa |
|
|
|
|
| Plastic mounting adapter, 18 mmfa |
|
+45 7010 4210