Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for
M4.2/MV4.2-8000-RT-4922
Produkt beskrivelse |
Thru-beam sensor for complex applications, miniature design, 8000 mm detection range, red light, push-pull output, test input, M8 plug |
System components |
Emitter | M4.2-8000-RT-4922 |
Receiver | MV4.2-8000-RT-4922 |
General specifications |
Effective detection range | 0 ... 8000 mm |
Threshold detection range | 10000 mm |
Light source | LED |
Light type | modulated visible red light |
Target size | min. 7 mm |
Diameter of the light spot | 300 mm at 8000 mm detection range |
Opening angle | approx. 2 ° |
Ambient light limit | |
| Continuous light | 40000 Lux |
| Modulated light | 5000 Lux |
Functional safety related parameters |
MTTFd | 550 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 60 % |
Indicators/operating means |
Operation indicator | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) |
Function indicator | LED yellow, lights up with receiver lit flashes when falling short of the operating reserve |
Control elements | sensitivity adjustment |
Electrical specifications |
Operating voltage | 10 ... 30 V DC |
Ripple | < 10 % |
No-load supply current | < 15 mA at 24 V DC |
Input |
Test input | emitter deactivation at +UB |
Output |
Switching type | light/dark on electrically switchable |
Signal output | Push-pull output, short-circuit protected, reverse polarity protected |
Switching voltage | max. 30 V DC |
Switching current | max. 100 mA |
Voltage drop | ≤ 2.5 V DC |
Switching frequency | 2000 Hz |
Response time | 250 µs |
Conformity |
Product standard | EN 60947-5-2 |
Compliance with standards and directives |
Standard conformity | |
| Shock and impact resistance | IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions |
| Vibration resistance | IEC / EN 60068-2-6. Sinus. 10 -2000 Hz, 10 g in each X, Y and Z directions |
Approvals and certificates |
CE conformity | yes |
UL approval | cULus Listed |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Storage temperature | -20 ... 75 °C (-4 ... 167 °F) |
Mechanical specifications |
Degree of protection | IP67 / IP69K |
Connection | M8 x 1 connector, 4-pin |
Material | |
| Housing | ABS |
| Optical face | glass pane |
Mass | 15 g (device) |
Dimensions | |
| Height | 31.4 mm |
| Width | 13.9 mm |
| Depth | 18 mm |
Note | For indoor use only The sensor must be protected against UV radiation. |
Classifications
System | Classcode |
ECLASS 13.0 | 27270901 |
ECLASS 12.0 | 27270901 |
ECLASS 11.0 | 27270901 |
ECLASS 10.0.1 | 27270901 |
ECLASS 9.0 | 27270901 |
ECLASS 8.0 | 27270901 |
ECLASS 5.1 | 27270901 |
ETIM 9.0 | EC002716 |
ETIM 8.0 | EC002716 |
ETIM 7.0 | EC002716 |
ETIM 6.0 | EC002716 |
ETIM 5.0 | EC002716 |
UNSPSC 12.1 | 39121528 |
Details:
M4.2/MV4.2-8000-RT-4922
Product Documentation:
M4.2/MV4.2-8000-RT-4922
Design / Simulation:
M4.2/MV4.2-8000-RT-4922
Approvals:
M4.2/MV4.2-8000-RT-4922
Tilhørende produkter:
M4.2/MV4.2-8000-RT-4922
Accessories |
|
|
|
Female cordset single-ended M8 straight A-coded, 4-pin, PVC cable greyfa |
|
|
|
|
Female cordset single-ended M8 angled A-coded, 4-pin, PVC cable greyfa |
|
|
|
|
Female cordset single-ended M8 straight A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
Female cordset single-ended M8 angled A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
Mounting Clampfa |
|
|
|
|
Mounting bracket fa |
|
|
|
|
Mounting bracket fa |
|
|
|
|
Mounting bracket fa |
|