Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for
M41-F2/MV41-F2/25/76a/92/136
| Produkt beskrivelse |
| Robust thru-beam sensor, compact housing design, 16 m detection range, emission frequency F2, red light and infrared light, light on, 2 push-pull outputs, test input, M12 plug |
| System components |
| Emitter | M41-F2/76a/92 |
| Receiver | MV41-F2/25/92/136 |
| General specifications |
| Effective detection range | 0 ... 16 m |
| Threshold detection range | normal mode: 25 m High power mode: 35 m (Control input at UB+) |
| Light source | normal mode: LED High power mode: LED+IRED |
| Light type | normal mode: modulated visible red light High power mode: Red and infrared, modulated light |
| Diameter of the light spot | approx. 500 mm at detection range 16 m |
| Opening angle | approx. 1.5 ° |
| Optical face | frontal |
| Ambient light limit | 50000 Lux |
| Functional safety related parameters |
| MTTFd | 844 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Operation indicator | LED green: power on |
| Function indicator | Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted |
| Control elements | sensitivity adjustment (receiver) |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC , class 2 |
| Ripple | max. 10 % |
| No-load supply current | max. 30 mA |
| Input |
| Test input | emitter deactivation at +UB (emitter) |
| Control input | High power mode activation with +UB (emitter) |
| Output |
| Switching type | light-on |
| Signal output | 2 push-pull (4 in 1) outputs, complementary, short-circuit proof, reverse polarity protected |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA |
| Voltage drop | ≤ 2.5 V DC |
| Switching frequency | 1000 Hz |
| Response time | 0.5 ms |
| Compliance with standards and directives |
| Directive conformity | |
| EMC Directive 2004/108/EC | EN 60947-5-2:2007 |
| Standard conformity | |
| Product standard | EN 60947-5-2:2007
IEC 60947-5-2:2007 |
| Standards | UL 508 |
| Approvals and certificates |
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) |
| Storage temperature | -40 ... 75 °C (-40 ... 167 °F) |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | 4-pin, M12 x 1 connector |
| Material | |
| Housing | Aluminum , Delta-Seal coated |
| Optical face | glass pane |
| Connector | metal |
| Mass | 50 g (device) |
| Dimensions | |
| Height | 56.5 mm |
| Width | 31 mm |
| Depth | 13.6 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270901 |
| ECLASS 12.0 | 27270901 |
| ECLASS 11.0 | 27270901 |
| ECLASS 10.0.1 | 27270901 |
| ECLASS 9.0 | 27270901 |
| ECLASS 8.0 | 27270901 |
| ECLASS 5.1 | 27270901 |
| ETIM 9.0 | EC002716 |
| ETIM 8.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 5.0 | EC002716 |
| UNSPSC 12.1 | 39121528 |
Details:
M41-F2/MV41-F2/25/76a/92/136
Product Documentation:
M41-F2/MV41-F2/25/76a/92/136
Design / Simulation:
M41-F2/MV41-F2/25/76a/92/136
Tilhørende produkter:
M41-F2/MV41-F2/25/76a/92/136
| Accessories |
|
|
|
| Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
| Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
| Mounting bracket for Sensors series MLV41 for M12 rod mountingfa |
|
|
|
|
| Mounting bracket fa |
|
+45 7010 4210