Support Industrielle sensorer
Support Explosion Protection

Thru-beam sensor LD39/LV39/32/40a/82a/116

LD39/LV39/32/40a/82a/116
  • Stability alarm indicator and output (static)
  • Light-on/dark-on, switchable
  • Supplied with mounting accessory
  • Degree of protection IP54

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:


Uddrag af datablad: Tekniske data for   LD39/LV39/32/40a/82a/116

Produkt beskrivelse
Thru-beam sensor, 20 m detection range, infrared light, light/dark on, DC version, PNP output, sensitivity adjuster, pre-fault output, terminal compartment
System components
EmitterLD39/116
ReceiverLV39/32/40a/82a/116
General specifications
Effective detection range0 ... 20 m
Threshold detection range25 m
Adjustment range2 ... 25 m
Reference targetreceiver
Light sourceLED
Light typemodulated infrared light
Ambient light limitIEC / EN 60947-5-2 , 10000 Lux
Functional safety related parameters
MTTFd800 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED red (emitter)
Function indicatorLED yellow: switching state (receiver)
LED red: pre-fault indicator, flashing (receiver)
Control elementsSensing range adjuster, light-on/dark-on changeover switch
Electrical specifications
Operating voltage10 ... 30 V DC
Ripple10 %
No-load supply current≤ 20 mA (device)
Time delay before availability≤ 300 ms
Output
Stability alarm output1 PNP, active when falling short of operating reserve
Switching typelight/dark on
Signal output1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching voltage≤ 30 V DC
Switching currentmax. 200 mA , resistive load
Voltage drop≤ 3 V
Switching frequency≤ 300 Hz
Response time≤ 1.5 ms
Conformity
Product standardEN 60947-5-2
Approvals and certificates
ApprovalsCE
Ambient conditions
Ambient temperature-25 ... 55 °C (-13 ... 131 °F)
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protectionIP54
Connectionterminal compartment PG9 , ≤ 0.75 mm2
Material
HousingPBT
Optical facePMMA
MassEmitter: approx. 90 g receiver: approx. 100 g
Dimensions
Height64 mm
Width25 mm
Depth75 mm
General information
Scope of deliveryMounting aid

Classifications

SystemClasscode
ECLASS 13.027270901
ECLASS 12.027270901
ECLASS 11.027270901
ECLASS 10.0.127270901
ECLASS 9.027270901
ECLASS 8.027270901
ECLASS 5.127270901
ETIM 9.0EC002716
ETIM 8.0EC002716
ETIM 7.0EC002716
ETIM 6.0EC002716
ETIM 5.0EC002716
UNSPSC 12.139121528

Details: LD39/LV39/32/40a/82a/116

Product Documentation: LD39/LV39/32/40a/82a/116

Language Selection:
Brief InstructionsSprogFil typeFil størrelse
Instruction leaflet / BeipackzettelALLPDF375 KB

Design / Simulation: LD39/LV39/32/40a/82a/116

Language Selection:
CADSprogFil typeFil størrelse
CAD 3-D / CAD 3-DALLSTP182 KB
CAD Portal / CAD PortalALLLINK---

Approvals: LD39/LV39/32/40a/82a/116

Language Selection:
Declaration of ConformityCertifikat nr.SprogFil typeFil størrelse
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-2134BALLPDF308 KB

Tilhørende produkter: LD39/LV39/32/40a/82a/116

Accessories
Mounting bracket for RL39 series Sensorsfa
R10x and R20x series photoelectric sensors

For the first time, a consistent solution range of photoelectric functional principles and innovative technologies is available in identical housings. Users benefit from a uniform operating concept across the entire portfolio. Discover the R100, R101, R103, R200 and R201 series ...

ML100 Photoelectric Sensor

Whether glass, solar wafers or printed circuit boards: The photoelectric sensors of the ML100 series are precisely tailored to meet the requirements of various complex detection tasks. Learn more about the portfolio and find the ideal sensor for your application ...