Select Your Country
PS1000-A6-48.5 Power Supply
Key Benefits at a Glance
- 100 V AC to 240 V AC wide-range input
- Output 48 V DC, 5.4 A, 260 W, 1-phase
- Housing width 39 mm
- Efficiency up to 95.5 %
- Minimal inrush current surge
- DC OK relay contact
- Suitable for Zone 2/Div. 2 mounting
Show more
Note
All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
EN
- DE
- EN
- ES
- FR
- PL
Technical data of PS1000-A6-48.5
| Efficiency | 93.8 % at 120 V AC 95.5 % at 230 V AC | |
| Power dissipation | 17.2 W at 120 V AC 12.3 W at 230 V AC |
| Voltage range | 100 ... 240 V AC (-15 %/+10 %), 50 ... 60 Hz (±6 %) 110 ... 150 V DC (±20 %) | |
| Current | 2.32 A at 120 V AC 1.2 A at 230 V AC 2.51 A at 110 V DC for lower output currents see technical information | |
| Inrush current | 6 A peak at 120 V AC and ambient temperature 40 °C (104 °F) 9 A peak at 230 V AC and ambient temperature 40 °C (104 °F) | |
| Capacity factor | 0.99 at 120 V AC 0.98 at 230 V AC |
| Rated voltage | Ur | 48 V DC |
| Voltage range | 48 ... 56 V DC factory setting: 48 V | |
| Rated current | Ir | 5 A |
| Current | 6 ... 5.2 A at ambient temperature < 45 °C (113 °F) 5.4 ... 4.6 A at ambient temperature 60 °C (140 °F) 4 ... 3.4 A at ambient temperature 70 °C (158 °F) linear power derating see technical information | |
| Power | 260 W | |
| Ripple | max. 50 mV pp | |
| Hold-up time | 34 ms at 120 V AC 34 ms at 230 V AC | |
| Overload behavior | continuous current : output voltage > 26 V DC intermittent current : output voltage < 26 V DC | |
| Short-circuit current | typ. 16 A for up to 12 ms, load impedance < 90 mΩ | |
| Voltage limitation | typ. 58.5 V DC max. 60 V DC |
| Connection | terminals 13, 14 | |
| Output type | relay contact DC OK - contact is closed if the output voltage is > 90 % of the adjusted output voltage | |
| Contact loading | max. 60 V DC/0.3 A ; 30 V DC/1 A ; 30 V AC/0.5 A resistive load min. 1 mA at 5 V DC |
| Input/Output | SELV/PELV |
| Display elements | LED green: status DC OK - LED lights up if the output voltage is > 90 % of the adjusted output voltage | |
| Control elements | potentiometer | |
| Configuration | setting of the output voltage via potentiometer |
| Electromagnetic compatibility | |||||
| |||||
| Low voltage | |||||
| |||||
| RoHS | |||||
| |||||
| Degree of protection | EN 60529 | |
| Shock resistance | EN 60068-2-27 | |
| Vibration resistance | EN 60068-2-6 |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) , see technical information | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | 5 ... 95 %, noncondensing | |
| Shock resistance | 20 g , 11 ms or 30 g , 6 ms | |
| Vibration resistance | 2 ... 17.8 Hz : ± 1.6 mm , 17.8 ... 500 Hz : 2 g |
| Housing material | aluminum alloy , galvanized steel | ||||||||||
| Degree of protection | IP20 | ||||||||||
| Connection | |||||||||||
| |||||||||||
| Mass | approx. 600 g | ||||||||||
| Dimensions | 39 x 124 x 117 mm (W x H x D) , without DIN mounting rail | ||||||||||
| |||||||||||
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | ||||||||||
| ATEX approval | ||||||||
| ||||||||
| Directive conformity | ||||||||
| ||||||||
II 3G Ex ec nC II T4 Gc| UL approval | E350173 , E223176 | ||||||||||
| IECEx approval | |||||||||||
| |||||||||||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |