In an AC grid, the line frequency is critical to the quality of the supply provided. Deviations from the target frequency must be tolerated only in a very narrow range. Otherwise, certain consumers will no longer function properly or will even be damaged. In a heating power plant, it must be ensured that the steam turbine always has a constant rotational speed.
Especially in non-rigid networks, the generator rotational speed can be influenced by, e. g., the switching on and off of essential consumers. On-board generators on ships are typical for such applications. Much higher fluctuations in consumption can occur here than with the public power supply. It is essential to respond to speed fluctuations immediately to keep the specified line frequency constant.
Continuous monitoring of the generator rotational speed is an indispensable protective function. As soon as the rotational speed deviates from the tolerance range, a suitable safety function must trigger targeted measures. In the event of overspeed, this can mean that the power is reduced. In the event of underspeed, the response can be to activate additional generators, or to switch off loads or entire network segments.
Pepperl+Fuchs offers rotation speed monitors in the DWB series for continuously monitoring the rotational speed of generators. These are isolated barriers (for signals from hazardous areas) or signal conditioners (for signals from the safe area) that respond when a certain rotational speed is exceeded or not met. All devices are designed for SIL 2 applications according to IEC 61508/IEC 61511. These interface components are used for monitoring a discrete signal, a NAMUR sensor, or a mechanical contact. Its functionality is based on the premise that the input frequency is constantly compared with a reference frequency defined by the user.
If the DWB rotation speed monitor detects that the reference frequency is exceeded or not met, integrated relay outputs are triggered. A red LED indicates that this line fault detection has been triggered. An integrated start-up override sets the relay outputs to the user-selected value of up to 1000 s. The device can be easily programmed using the operating push buttons on the front of the device.
We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.
Please select the group of cookies and scripts, that you consent to.