Adapter K-device - S1000 termination board S1000-KFD Adapter
- Adapter for mounting a K-device to S1000 termination board
- Snap-on
- Additional cable sets depending on K-device
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot S1000-KFD Adapter
| Supply | ||
|---|---|---|
| Rated voltage | 20.4 ... 30 V DC | |
| Electrical specifications | ||
| Connection | see Datasheet module | |
| Conformity | ||
| Degree of protection | IEC 60529 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | see Datasheet device | |
| Mass | approx. 50 g | |
| Dimensions | 95 x 21 x 30 mm (3.7 x 0.8 x 1.2 inch) | |
| Height | 30 mm | |
| Width | 21 mm | |
| Length | 95 mm | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | CESI 04 ATEX 142 X | |
| Marking |  II (1)G [EEx ia] IIC |
|
| Supply | ||
| Maximum safe voltage | 250 V AC / 375 V DC (Attention! Um is no rated voltage.) | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 50014, EN 50020 | |
| International approvals | ||
| IECEx approval | ||
| IECEx certificate | IECEx LCI 07.0013X | |
| IECEx marking | [Ex ia] IIC , [Ex iaD] | |
| Standards | IEC 60079-0:2004 , IEC 60079-11:2006 , IEC 61241-0:2004 , IEC 61241-11:2005 | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27211090 |
| ECLASS 12.0 | 27211090 |
| ECLASS 11.0 | 27211090 |
| ECLASS 10.0.1 | 27219190 |
| ECLASS 9.0 | 27219190 |
| ECLASS 8.0 | 27219190 |
| ECLASS 5.1 | 27219901 |
| ETIM 9.0 | EC003015 |
| ETIM 8.0 | EC003015 |
| ETIM 7.0 | EC003015 |
| ETIM 6.0 | EC003015 |
| ETIM 5.0 | EC003015 |
| UNSPSC 12.1 | 39121018 |
Details: S1000-KFD Adapter
Function
The S1000 system is not maintained any longer.
To be able to maintain existing installations the S1000-KFD adapter enables the mounting of an equivalent K-system module. A table with correspondent S1000 and K devices allows the correct selection of the Kdevice.
The adapter is an accessory to the Kdevice. It serves the mechanical mounting on the termination board.
Warning!
The adapter S1000-KFD must only be used with an Ex-certified K module. Every single usage results in improper utilization and therefore endangers the intrinsic safety!
Product Documentation: S1000-KFD Adapter
| Safety and Security Documentation | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|
| Käyttöohje | FIN | 0 KB |
Approvals: S1000-KFD Adapter
| Certificates | Sertifikaatin nro | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|---|
| Europe CESI ATEX Category (1) G | CESI 04 ATEX 142X | ALL | 183 KB | |
| LCIE IECEx Certificate of Conformity | IECEx LCI 07.0013X | ALL | LINK | --- |
Pepperl+Fuchs Oy
Areenakatu 7
FI-37570 Lempäälä
Finland
info@fi.pepperl-fuchs.com
+358 20 7861 290
info@fi.pepperl-fuchs.com
+358 20 7861 291
Pepperl+Fuchs on dynaaminen ja tulevaisuuteen suuntaava yritys joka myy konepajateollisuuden, robotiikan ja teollisuusautomaation komponentteja. Tuotannon sujuvuus, tuotteiden korkea laatu ja niiden maailmanlaajuinen saatavuus ovat tuoneet yritykselle menestystä jo yli 70 vuoden ajan. Pepperl+Fuchs työllistää maailman laajuisesti yhteensä noin 6300 henkilöä. Globaalilla yrityksellä on tuotantolaitoksia Saksassa, Singaporessa, Yhdysvalloissa, Unkarissa, Indonesiassa ja Vietnamissa, joista suurin osa ovat ISO 9001-sertifioitu.