Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot
OBR1500-R3F-E0-L
| Tuotekuvaus |
| Retroreflective sensor, flat design, M3 mounting, 1500 mm detection range, red light, dark on, NPN output, fixed cable |
| General specifications |
| Effective detection range | 0 ... 1500 mm |
| Reflector distance | 60 ... 1500 mm |
| Threshold detection range | 1800 mm |
| Reference target | H40 reflector |
| Light source | LASER LIGHT |
| Light type | modulated visible red light , 680 nm |
| Polarization filter | yes |
| Laser nominal ratings | |
| Note | LASER LIGHT , DO NOT STARE INTO BEAM |
| Laser class | 1 |
| Wave length | 680 nm |
| Beam divergence | > 5 mrad |
| Pulse length | approx. 3 µs |
| Repetition rate | approx. 16.6 kHz |
| max. pulse energy | 8 nJ |
| Angle deviation | approx. 0.5 ° |
| Object size | typ. starts from 1.5 mm |
| Diameter of the light spot | approx. 25 mm at a distance of 1500 mm |
| Opening angle | approx. 1 ° |
| Optical face | frontal |
| Ambient light limit | EN 60947-5-2 : 30000 Lux |
| Functional safety related parameters |
| MTTFd | 800 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Operation indicator | LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz) |
| Function indicator | Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted |
| Electrical specifications |
| Operating voltage | 12 ... 24 V |
| No-load supply current | < 10 mA |
| Protection class | III |
| Output |
| Switching type | NO contact / dark-on |
| Signal output | 1 NPN output, short-circuit protected, reverse polarity protected, open collector |
| Switching voltage | max. 30 V DC |
| Switching current | max. 50 mA , resistive load |
| Voltage drop | ≤ 1.5 V DC |
| Switching frequency | approx. 2 kHz |
| Response time | 250 µs |
| Conformity |
| Product standard | EN 60947-5-2 |
| Laser safety | EN 60825-1:2007 |
| Approvals and certificates |
| UL approval | E87056 , cULus Recognized, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| FDA approval | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Ambient conditions |
| Ambient temperature | -10 ... 60 °C (14 ... 140 °F) |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | 2 m fixed cable |
| Material | |
| Housing | PC (Polycarbonate) and Stainless steel |
| Optical face | PMMA |
| Cable | PUR |
| Mass | approx. 20 g |
| Tightening torque, fastening screws | 1 Nm |
| Dimensions | |
| Height | 25.5 mm |
| Width | 16 mm |
| Depth | 4.1 mm |
| Cable length | 2 m |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270902 |
| ECLASS 12.0 | 27270902 |
| ECLASS 11.0 | 27270902 |
| ECLASS 10.0.1 | 27270902 |
| ECLASS 9.0 | 27270902 |
| ECLASS 8.0 | 27270902 |
| ECLASS 5.1 | 27270902 |
| ETIM 9.0 | EC002717 |
| ETIM 8.0 | EC002717 |
| ETIM 7.0 | EC002717 |
| ETIM 6.0 | EC002717 |
| ETIM 5.0 | EC002717 |
| UNSPSC 12.1 | 39121528 |
Details:
OBR1500-R3F-E0-L
Product Documentation:
OBR1500-R3F-E0-L
Design / Simulation:
OBR1500-R3F-E0-L
Approvals:
OBR1500-R3F-E0-L
Liitännäistuotteet:
OBR1500-R3F-E0-L
| Accessories |
|
|
|
| Reflector, rectangular 47.5 mm x 23.5 mm, mounting holes, fixing strapfa |
|
|
|
|
| Reflector with mounting holesfa |
|
|
|
|
| Reflector with Micro-structure, rectangular 32 mm x 20 mm, mounting holesfa |
|
|
|
|
| Reflector with Micro-structure, rectangular 23 mm x 13.8 mm, diagonal mounting holefa |
|
+358 20 7861 290