Vibration sensor VIM82PU-S1B10-20E-I42WV19

Suitable for SIL2/Pld applications
Rugged stainless steel housing
Vibration acceleration in g (rms) acc. to DIN ISO 10816/20816
Bearing status parameter according to DIN ISO 13373
2 relays outputs for safety functions with adjustable switching tresholds, allowing monitoring of a window area

Technical Data
Details
Informative Literature
Product Documentation
Design / Simulation
Approvals
Associated Products

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Lataa koko tietolomake PDF-tiedostona:

Ote tietolomakkeesta: Tekniset tiedot VIM82PU-S1B10-20E-I42WV19

Tuotekuvaus
Vibration sensor with safety function both for the analog current output and for the 2 relay outputs with adjustable swichting thresholds

General specifications
Type		Vibration sensor
Measuring technology		MEMS
Series		Pure Line
Measured variable		Vibration acceleration Bearing status parameter
Measuring range
	Vibration acceleration	0 ... 10 g rms
	Bearing status parameter	1 ... 4 see section characteristic curve
Measurement accuracy		± 0.01 g (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954
Cross-sensitivity		< 5 % of the partial lateral acceleration, which acts exactly 90° to the measuring axis
Frequency range		10 ... 1000 Hz
Averaging time		for a-rms: 2 s
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 2
Performance level (PL)		PL d
Category		Cat. 2
MTTF_d		329 a
Mission Time (T_M)		10 a
Diagnostic Coverage (DC)		min. 90 %
Indicators/operating means
Status indicator		6 LEDs for operating states
Control elements		4 rotary switches and 1 push button for programming
Electrical specifications
Fusing		external fuse is required: 3 A , semi-time-lag , 30 V DC
Operating voltage		24 V DC + 7 % / - 10 %
Current consumption		max. 100 mA
Power consumption		2.6 W
Time delay before availability		15 s (initially self-test functions are executed before safe measured values are available at the output)
Surge protection		up to 2 kV
Output 1
Output type		relay
Switching function		Normally open (NO)
Switching voltage		max. 30 V DC
Switching current		max. 1 A
Output 2
Output type		relay
Switching function		Normally open (NO)
Switching voltage		max. 30 V DC
Switching current		max. 1 A
Output 3
Output type		analog output, current output of the vibration variable
Output current		4 ... 20 mA
Load resistor		≤ 500 Ω
Output 4
Output type		analog output, current output of the bearing status parameter
Output current		4 ... 20 mA (bearing status parameter according to DIN ISO 13373-3, see section characteristic curve) with steps: 1 = 4 ... 8 mA 2 = 8 ... 12 mA 3 = 12 ... 16 mA 4 = 16 ... 20 mA
Load resistor		≤ 500 Ω
Standard conformity
Degree of protection		DIN EN 60529, IP66, IP67
Shock resistance		DIN EN 60068-2-27, 60 g, 6 ms
Vibration resistance		DIN EN 60068-2-6, 16.5 g, 10 ... 1000 Hz
Vibration evaluation		DIN ISO 10816/20816
Functional safety		DIN EN IEC 61508 , SIL 2 EN ISO 13849 , PL d
Approvals and certificates
UL approval
	Ordinary Location	E468231 cULus Listed, Class III Power Source and limited energy , if UL marking is marked on the product. For use in NFPA 70 Applications only. adapters providing field wiring on request
	Maximum permissible ambient temperature	max. 60 °C (max. 140 °F)
Ambient conditions
Ambient temperature		-40 ... 60 °C (-40 ... 140 °F)
Measuring head temperature		-40 ... 85 °C (-40 ... 185 °F) directly at the mounting point
Storage temperature		-40 ... 60 °C (-40 ... 140 °F)
Mechanical specifications
Connection type		plug
Housing material		Stainless steel 1.4305 / AISI 303
Degree of protection		IP66 / IP67 only in connected state and correctly mounted housing cover
Connector
	Threading	M12
	Number of pins	8
Mass		approx. 500 g
Dimensions
	Height	46 mm
	Width	62 mm
	Length	73.5 mm
General information
Scope of delivery		1 x allen head screw M8 x 20 1 x spring washer M8 1 x seal label

Classifications

System	Classcode
ECLASS 13.0	27271103
ECLASS 12.0	27201406
ECLASS 11.0	27201406
ECLASS 10.0.1	27201406
ECLASS 9.0	27201406
ECLASS 8.0	27201406
ECLASS 5.1	27201406
ETIM 9.0	EC004309
ETIM 8.0	EC004309
ETIM 7.0	EC002959
ETIM 6.0	EC002959
ETIM 5.0	EC001758
UNSPSC 12.1	41114624

Details: VIM82PU-S1B10-20E-I42WV19

Function

The vibration sensor determines the vibration quantity using rms (root mean square) averaging. This form of quadratic averaging or pre-filtering enables precise trend statements about the condition of the application.

The vibration sensor has a safety integrity level (SIL 2) for usage in functional safety applications.

For monitoring tasks within the scope of functional safety, 2 relay outputs with adjustable switching thresholds are available. With simultaneous evaluation of both relay outputs by a controller, monitoring of a window area is thus possible, e.g. as part of Condition Monitoring.

An additional analog current output provides the bearing status parameter weighted according to DIN ISO 13373. This allows a qualitative assessment of the condition of rolling-element bearings.

Informative Literature: VIM82PU-S1B10-20E-I42WV19

Literature	Kieli	Tiedostotyyppi	Tiedoston koko
Product Overview - Vibration Sensors	ENG	PDF	1351 KB

Product Documentation: VIM82PU-S1B10-20E-I42WV19

Brief Instructions	Kieli	Tiedostotyyppi	Tiedoston koko
Instruction leaflet / Beipackzettel	ALL	PDF	252 KB
Safety and Security Documentation
Käyttöohje	FIN	PDF	145 KB
Manual	ENG	PDF	1955 KB
Manuals
Manual VIM8* Vibration Sensors	ENG	PDF	2780 KB

Design / Simulation: VIM82PU-S1B10-20E-I42WV19

CAD	Kieli	Tiedostotyyppi	Tiedoston koko
CAD 3-D / CAD 3-D	ALL	STP	2221 KB
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	72 KB

Approvals: VIM82PU-S1B10-20E-I42WV19

Certificates	Sertifikaatin nro	Kieli	Tiedostotyyppi	Tiedoston koko
Canada, USA UL Ordinary Location	E468231	ALL	PDF	610 KB
Worldwide TÜV SÜD Functional Safety Certificate	Z10 020068 0096	ALL	PDF	298 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-5658	ALL	PDF	327 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-5659	ALL	PDF	252 KB

Liitännäistuotteet: VIM82PU-S1B10-20E-I42WV19

Accessories

	RSL8-CS-SC-M55P200 Protective rubber sleeve
	Protective rubber sleeve for VIM8* vibration sensors against ingress of moisture and mechanical effectsfa

	V19-G-BK2M-PUR-U/ABG Cable socket, shielded
	Female cordset single-ended M12 straight A-coded, 8-pin, PUR cable black, shielded, UL approved, drag chain suitablefa

	MONAD-M08-1,25-M08-1,25K/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M8 x 1.25, screw-in depth 19.5fa

	MONAD-M08-1,25-M30-3,5/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M30 x 3.5, screw-in depth 45fa

	V19-G-BK5M-PUR-U/ABG Cable socket, shielded
	Female cordset single-ended M12 straight A-coded, 8-pin, PUR cable black, shielded, UL approved, drag chain suitablefa

	V19-G-BK10M-PUR-U/ABG Cable socket, shielded
	Female cordset single-ended M12 straight A-coded, 8-pin, PUR cable black, shielded, UL approved, drag chain suitablefa

	MONAD-M08-1,25-M20-2,5/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M20 x 2.5, screw-in depth 34fa

	MONAD-M08-1,25-M10-1,5/8 Mounting adapter
	Mounting adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread M10 x 1.5, screw-in depth 18fa

	MONAD-M08-1,25-M12-1,75/8 Mounting adapter
	Mounting adapter for VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M12 x 1.75, screw-in depth 21fa

	MONAD-M08-1,25-M16-2,0/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M16 x 2.0, screw-in depth 27fa

	MONAD-M08-1,25-M24-3,0/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M24 x 3.0, screw-in depth 40fa

General Notes Relating to Pepperl+Fuchs Product Information

Pepperl+Fuchs Oy
Areenakatu 7
FI-37570 Lempäälä
Finland
info@fi.pepperl-fuchs.com
phone +358 20 7861 290
info@fi.pepperl-fuchs.com
phone +358 20 7861 291

Pepperl+Fuchs on dynaaminen ja tulevaisuuteen suuntaava yritys joka myy konepajateollisuuden, robotiikan ja teollisuusautomaation komponentteja. Tuotannon sujuvuus, tuotteiden korkea laatu ja niiden maailmanlaajuinen saatavuus ovat tuoneet yritykselle menestystä jo yli 70 vuoden ajan. Pepperl+Fuchs työllistää maailman laajuisesti yhteensä noin 6300 henkilöä. Globaalilla yrityksellä on tuotantolaitoksia Saksassa, Singaporessa, Yhdysvalloissa, Unkarissa, Indonesiassa ja Vietnamissa, joista suurin osa ovat ISO 9001-sertifioitu.