HART Connection Cable with Connectors K-HM14

K-System accessory
Connection cable for KFD2-HMM-16 to up to 15 KFD0-HMS-16
14-pin ribbon cable

Technical Data
Details
Associated Products

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Lataa koko tietolomake PDF-tiedostona:

Ote tietolomakkeesta: Tekniset tiedot K-HM14

Tuotekuvaus
HART connection cable for primary module - secondary module connection

Ambient conditions
Ambient temperature		0 ... 70 °C (32 ... 158 °F)
Relative humidity		5 ... 90 %, non-condensing
Mechanical specifications
Connection
	Device	16 x IDC female connector, 14-pin
Cable length		0.45 m
Note		distance of plugs 3 cm (1.2 inch)

Classifications

System	Classcode
ECLASS 13.0	27219090
ECLASS 12.0	27219090
ECLASS 11.0	27219290
ECLASS 10.0.1	27219290
ECLASS 9.0	27219290
ECLASS 8.0	27219290
ECLASS 5.1	27242692
ETIM 9.0	EC002584
ETIM 8.0	EC002584
ETIM 7.0	EC002584
ETIM 6.0	EC002584
ETIM 5.0	EC002584
UNSPSC 12.1	39121008

Details: K-HM14

Function

The connection cable K-HM14 is used for connection of a HART MUX primary module KFD2-HMM-16 to up to 15 HART MUX secondary modules KFD0-HMS-16.

The connection cable has 16 connectors and a length of 0.45 m.

Liitännäistuotteet: K-HM14

Accessory of

	FI-PFH-NS0137-R HART Termination Board
	Connection board for K-System HART Multiplexer, 16-channel, Interface for series connection or parallel connection, Integrated, switchable 220 Ω resistor, Connection via screw terminalspa

	FI-PFH-TR-AI-370X-GP HART Termination Board
	System board for Schneider Electric, Tricon series by Triconex, TAN48 approval, HART Termination Board (ETP) for Tricon v10 AI module, For 16-channel AI cards 3700, 3700A, 3703E and 3721, 16-channel, Field side: pluggable screw terminals, green, Control side: ELCO socket, 56-pinpa

	FI-PFH-TR-AO-380X HART Termination Board
	System board for Schneider Electric, Tricon series by Triconex, HART Termination Board (ETP) for Tricon AO module, For 8-channel AO card 3805E, 8-channel, Field side: pluggable screw terminals, green, Control side: ELCO socket, 56-pinpa

Matching System Components

	KFD2-HMM-16 HART MUX Primary Module
	16-channel, 24 V DC supply (Power Rail), HART field device input (revision 5 to 7), Up to 15 KFD0-HMS-16 HART MUX secondary modules can be connected, Up to SIL 3 acc. to IEC/EN 61508pa

	KFD0-HMS-16 HART MUX Secondary Module
	16-channel, No external power required, HART field device input (revision 5 to 7), Used with HART MUX primary module KFD2-HMM-16, Up to SIL 3 acc. to IEC/EN 61508pa

General Notes Relating to Pepperl+Fuchs Product Information

Pikalinkit

Pepperl+Fuchs Oy
Areenakatu 7
FI-37570 Lempäälä
Finland
info@fi.pepperl-fuchs.com
phone +358 20 7861 290
info@fi.pepperl-fuchs.com
phone +358 20 7861 291

Pepperl+Fuchs on dynaaminen ja tulevaisuuteen suuntaava yritys joka myy konepajateollisuuden, robotiikan ja teollisuusautomaation komponentteja. Tuotannon sujuvuus, tuotteiden korkea laatu ja niiden maailmanlaajuinen saatavuus ovat tuoneet yritykselle menestystä jo yli 70 vuoden ajan. Pepperl+Fuchs työllistää maailman laajuisesti yhteensä noin 6300 henkilöä. Globaalilla yrityksellä on tuotantolaitoksia Saksassa, Singaporessa, Yhdysvalloissa, Unkarissa, Indonesiassa ja Vietnamissa, joista suurin osa ovat ISO 9001-sertifioitu.