Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot
NJ4-30GM-N-200-10M
General specifications |
Switching function | Normally closed (NC) |
Output type | NAMUR |
Rated operating distance | 4 mm |
Installation | flush |
Assured operating distance | 0 ... 3.04 mm |
Reduction factor rAl | 0.15 |
Reduction factor rCu | 0.05 |
Reduction factor r304 | 0.55 |
Output type | 2-wire |
Nominal ratings |
Nominal voltage | 8.2 V (Ri approx. 1 kΩ) |
Switching frequency | 0 ... 1000 Hz |
Hysteresis | ≤ 20 % at 200°C |
Suitable for 2:1 technology | yes , Reverse polarity protection diode not required |
Current consumption | |
| Measuring plate not detected | min. 3 mA |
| Measuring plate detected | ≤ 1 mA |
Compliance with standards and directives |
Standard conformity | |
| NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
| Standards | EN IEC 60947-5-2 |
Approvals and certificates |
IECEx approval | |
| Equipment protection level Ga | IECEx PTB 11.0037X |
| Equipment protection level Gb | IECEx PTB 11.0037X |
| Equipment protection level Da | IECEx PTB 11.0037X |
| Equipment protection level Mb | IECEx PTB 11.0037X |
ATEX approval | |
| Equipment protection level Ga | PTB 00 ATEX 2048 X |
| Equipment protection level Gb | PTB 00 ATEX 2048 X |
| Equipment protection level Da | PTB 00 ATEX 2048 X |
UL approval | |
| Ordinary Location | E87056 |
| Hazardous Location | E501628 |
| Control drawing | 116-0452 |
CCC approval | |
| Hazardous Location | 2020322315002257 |
NEPSI approval | |
| NEPSI certificate | GYJ16.1393X |
CML approval | on request |
ANZEx | 18.3018X |
Ambient conditions |
Ambient temperature | 0 ... 200 °C (32 ... 392 °F) |
Mechanical specifications |
Connection type | cable |
Housing material | Stainless steel 1.4305 / AISI 303 |
Sensing face | PPS |
Degree of protection | IP65 |
Cable | |
| Cable diameter | 4 mm ± 0.2 mm |
| Bending radius | > 10 x cable diameter |
| Material | FEP |
| Core cross section | 0.34 mm2 |
| Length | 10 m |
Dimensions | |
| Length | 75 mm |
| Diameter | 30 mm |
Note | amplifier -25°C...70°C 2 m PTFE cable between amplifier and oscillator |
General information |
Use in the hazardous area | see instruction manuals |
Classifications
System | Classcode |
ECLASS 13.0 | 27274001 |
ECLASS 12.0 | 27274001 |
ECLASS 11.0 | 27270101 |
ECLASS 10.0.1 | 27270101 |
ECLASS 9.0 | 27270101 |
ECLASS 8.0 | 27270101 |
ECLASS 5.1 | 27270101 |
ETIM 9.0 | EC002714 |
ETIM 8.0 | EC002714 |
ETIM 7.0 | EC002714 |
ETIM 6.0 | EC002714 |
ETIM 5.0 | EC002714 |
UNSPSC 12.1 | 39121550 |
Details:
NJ4-30GM-N-200-10M
Product Documentation:
NJ4-30GM-N-200-10M
Safety and Security Documentation | Kieli | Tiedostotyyppi | Tiedoston koko |
Käyttöohje | FIN | PDF | 172 KB
|
Approvals:
NJ4-30GM-N-200-10M
Liitännäistuotteet:
NJ4-30GM-N-200-10M
Accessories |
|
|
|
Mounting flange, 30 mmfa |
|